1000psi/70bar/7MPa

• Available in four capacities from
  3.0 kN to 10 kN.
• Normally retracted plungers do not interfere with part loading. Advance them with hydraulic pressure, exerting only spring force to bring plunger into contact with the part. Hydraulic pressure then automatically sequences, "freezing" the plunger properly against the part.
• Choose between a High-Tension
  or Low-Tension Spring to fit
  your application.
• Floating locator that doesn't interfere
  with 3-2-1 locating principles.
• Only spring force is applied to the part. Hydraulic actuation freezes the plunger without exerting any additional force
  on the part.
• Minimal friction wiper design keeps chips
  and debris out while providing smooth plunger action.
• Cartridge style work supports provide designer's with additional mounting options. These supports can be thread mounted into a fixture or custom
  cavity mounted.

Bearing grade stainless steel plunger and collet assembly helps guard against corrosion in most machining environments.

The maximum system back-pressure a
fluid advance work support can
overcome is 0.07 MPa (0.7 bar).
Return back-pressure greater than
0.07 MPa (0.7 bar) may cause
slow or failed retraction.