1000psi/70bar/7MPa

WARNING! Never allow swing arm to contact workpiece or fixture during arm rotation.

* Cylinder capacities are listed at 7MPa (70bar) operating pressure, with a standard length VektorFlo 7MPa arm installed. Maximum operating pressure is 10MPa (100bar). The minimum operating pressure is 1MPa (10 bar). The clamping force is adjustable by varying the hydraulic system pressure. To determine the approximate output force for your application, divide the cylinder capacity shown above by 7MPa (70bar), and multiply the resultant number by your system operating pressure MPa (bar) to obtain the approximate clamping force for your application. (Actual force will vary slightly due to internal cantilever loading, and/or friction loss.

** To allow for piece part height variations, it is recommended that the vertical travel be set to about 50% of the vertical stroke.

*** To ensure maximum service life and trouble-free operation, restrict fluid flow per Table.

WARNING! Never allow swing arm to contact workpiece or fixture during arm rotation.

*Cylinder retract capacities are listed at 7 MPa (70 bar) operating pressure. Divide cylinder retract force by 2 for when using symmetrical length arm. Maximum operating pressure is 10 MPa (100 bar). The minimum operating pressure is 1 MPa (10 bar). The clamping force is adjustable by varying the hydraulic system pressure. To determine the approximate output force for your application, divide the cylinder capacity shown above by 7 MPa (70 bar), and multiply the resultant number by your system operating pressure MPa (bar) to obtain the approximate retract force for your application. (Actual force will vary slightly due to internal loading, and/or friction loss.)

** To allow for piece part height variations, it is recommended that the vertical travel be set to about 50% of the vertical stroke.

*** To ensure maximum service life and trouble-free operation, restrict fluid flow per Table.

**** In-port flow control requires the use of manifold mount ports.

7MPa Bottom Flange Swing Clamps Features

TuffCam™ 7 MPa Swing Clamps are designed to operate from 1 MPa (10 bar) to 7 MPa (70 bar) without pressure reduction. At 7MPa (70 bar), 6 clamp capacities are available ranging from 1.9 kN to 20.4 kN. 7 MPa Clamps and work supports are paired to work at pressures between 4 MPa (40 bar) and7 MPa (70 bar) without pressure reducing the clamp. Even with an extended arm. Patented ball seat delievers improved rotary function, cam follower contact, while reducing dynamic and static friction. Can be either manifold mounted or plumbed. Tungsten-Carbide cam followers for strength and wear. Arms sold separately. The standard length 7 MPa arm with the threaded contact bolt hole is designed to clamp over the work support centerline. Optional In-port Flow Control is a meter-in device with a reverse free flow check valve.