1000psi/70bar/7MPa

* Clamp capacities are listed at 7MPa (70 bar) operating pressure with a standard length 7MPa link clamp lever installed. Use of an extended length lever will result in a reduction of clamp force. See tables and charts in the Link Clamp Lever section for the clamping force of various lever lengths and pressures. The force is adjustable by varying the hydraulic system.

** To insure maximum service life and trouble-free operation, restrict fluid flow to the above flow ratings. If you are unable to measure flow rates, these devices should be positioned in no less than
1/2 second. These recommendations apply when using the standard lever. When using the optional extended lever or your custom lever, please restrict the flow rates to position the lever in no less
than 1 second.

*** Equal to +/-3° with standard lever

**** In-port flow control requires the use of manifold mount ports.

Note: Maximum operating pressure is 10 MPa (100 bar)
Minimum operating pressure is 1 MPa (10 bar)

Optional in-port flow
control is a meter-in
device with reverse
free flow check valve.

• Patented rotary lug feature delivers 360° of lever positioning. Simply rotate the lug and lever over
  the desired clamping location and torque the
  set screws.
• Maximum clamping force - Minimal footprint.
• Available in five sizes from 2.4 kN to 16 kN capacities at 7 MPa (70 bar).
• Operate at any pressure without pressure reducing the clamp.
• Excellent alternative to a swing clamp when swing space or hydraulic pressure is limited.
• Top flange manifold mounted or standard plumbed using G 1/4, G 1/8, S-Series or -Series fittings (face seal  Model Nos. 39-0510-87 and
  39-0510-88 O-rings included)
• Levers sold separately.
• Link Clamp Levers and Work Supports are paired to clamp over centerline of work support.
• Optional In-port Flow Control is a meter-in device with a reverse free flow check valve.