
	Rapid Order View Cart Login Sign Up

1000psi/70bar/7MPa

You have 0 item(s)
in your cart.
View Cart

Work Supports and Clamps as a System

Home > Products > 1000psi/70bar/7MPa > Work Supports > Work Supports and Clamps as a System
Clamping Systems (PDF 408.00 KB)

Support and Clamp Systems

Link Clamps, Swing Clamps and Work Supports are designed to work
as a system.
Clamps and Work Supports work together at the same pressure.
Sequencing is required and must occur
above 2.5 MPa.
Clamps do not need pressure reduction when clamping over a work support and operating in the range of 4 to 7 MPa.This applies even when Vektek extended arms are used.
Work Supports need not be
pressure intensified.

Off the shelf Swing Clamp Arms and Link Clamp levers designed to the correct length for clamping.

Clamping Over Work Supports,
Paired for your Convenience

Clamping Force (kN)	Swing Clamp Models	Bore Size	Link Clamp Models	Work Support Models	Work Support Capacity (kN)
Swing or Link Clamps Paired with the Right Work Support
0.9 - 1.7	L1-4X25-XX	25	L1-6025-00	L1-0X12-00	4.0
1.6 - 3.2	L1-4X32-XX	32	L1-6032-00	L1-0X15-00	5.5
2.6 - 5.1	L1-4X40-XX	40	L1-6040-00	L1-0X16-00	10.0
4.3 - 7.6	L1-4X50-XX	50	L1-6050-00	L1-0X20-00	16.0
6.9 - 12.6	L1-4X63-XX	63	L1-6063-00	L1-0X22-00	26.0
Pairs deliver at least 1.5 to 1 Work Support to Clamp Capacity Ratio

WARNING! Operating above 7MPa (70bar) may damage the work support and will
void warranty.

Force - Tables and Graphs

Clamp sequencing must always occur above 2.5 MPa.

Operating Pressure (MPa)	4.0 kN Work Support Capacity (kN)	25 Bore Swing Clamp Force (kN)*	Swing Clamp to Work Support Support Ratio	25 Bore Link Clamp Force (kN)**	Link Clamp to Work Support Support Ratio
Clamp to Support Ratios
7.0	4.0	1.7	2.4	1.5	2.7
6.0	3.3	1.4	2.4	1.3	2.6
5.0	2.7	1.2	2.3	1.1	2.5
4.0	2.0	0.9	2.1	0.9	2.2
ILML10005-4.0 REV A		* Using L9-1425-01 Arm		** Using L9-1625-03 Lever

Operating Pressure (MPa)	5.5 kN Work Support Capacity (kN)	32 Bore Swing Clamp Force (kN)*	Swing Clamp to Work Support Support Ratio	32 Bore Link Clamp Force (kN)**	Link Clamp to Work Support Support Ratio
Clamp to Support Ratios
7.0	5.5	3.2	1.7	2.9	1.9
6.0	4.6	2.7	1.7	2.5	1.8
5.0	3.7	2.3	1.6	2.0	1.9
4.0	2.8	1.8	1.6	1.6	1.8
ILML10005-5.5 REV A		* Using L9-1432-01 Arm		** Using L9-1632-03 Lever

Operating Pressure (MPa)	10 kN Work Support Capacity (kN)	40 Bore Swing Clamp Force (kN)*	Swing Clamp to Work Support Support Ratio	40 Bore Link Clamp Force (kN)**	Link Clamp to Work Support Support Ratio
Clamp to Support Ratios
7.0	10.0	5.1	2.0	4.5	2.2
6.0	8.3	4.4	1.9	3.9	2.1
5.0	6.7	3.7	1.8	3.2	2.1
4.0	5.0	2.9	1.7	2.6	1.9
ILML10005-10 REV A		* Using L9-1440-01 Arm		** Using L9-1640-03 Lever

Operating Pressure (MPa)	16 kN Work Support Capacity (kN)	50 Bore Swing Clamp Force (kN)*	Swing Clamp to Work Support Support Ratio	50 Bore Link Clamp Force (kN)**	Link Clamp to Work Support Support Ratio
Clamp to Support Ratios
7.0	16.0	7.6	2.1	7.6	2.1
6.0	13.3	6.5	2.0	6.5	2.0
5.0	10.7	5.4	2.0	5.4	2.0
4.0	8.0	4.3	1.9	4.4	1.8
ILML10005-16 REV A		* Using L9-1450-01 Arm		** Using L9-1650-03 Lever

Operating Pressure (MPa)	26 kN Work Support Capacity (kN)	63 Bore Swing Clamp Force (kN)*	Swing Clamp to Work Support Support Ratio	63 Bore Link Clamp Force (kN)**	Link Clamp to Work Support Support Ratio
Clamp to Support Ratios
7.0	26.0	12.0	2.2	12.6	2.1
6.0	21.7	10.3	2.1	10.8	2.0
5.0	17.3	8.6	2.0	9.0	1.9
4.0	13.0	6.9	1.9	7.2	1.8
ILML10005-26 REV A		* Using L9-1463-01 Arm		** Using L9-1463-03 Lever

Support and Clamp SystemsForce - Tables and Graphs

Link Clamps, Swing Clamps and Work Supports are designed to work
as a system.
Clamps and Work Supports work together at the same pressure.
Sequencing is required and must occur
above 2.5 MPa.
Clamps do not need pressure reduction when clamping over a work support and operating in the range of 4 to 7 MPa.This applies even when Vektek extended arms are used.
Work Supports need not be
pressure intensified.

Off the shelf Swing Clamp Arms and Link Clamp levers designed to the correct length for clamping.

Clamping Over Work Supports,
Paired for your Convenience

Clamping Force (kN)	Swing Clamp Models	Bore Size	Link Clamp Models	Work Support Models	Work Support Capacity (kN)
Swing or Link Clamps Paired with the Right Work Support
0.9 - 1.7	L1-4X25-XX	25	L1-6025-00	L1-0X12-00	4.0
1.6 - 3.2	L1-4X32-XX	32	L1-6032-00	L1-0X15-00	5.5
2.6 - 5.1	L1-4X40-XX	40	L1-6040-00	L1-0X16-00	10.0
4.3 - 7.6	L1-4X50-XX	50	L1-6050-00	L1-0X20-00	16.0
6.9 - 12.6	L1-4X63-XX	63	L1-6063-00	L1-0X22-00	26.0
Pairs deliver at least 1.5 to 1 Work Support to Clamp Capacity Ratio

WARNING! Operating above 7MPa (70bar) may damage the work support and will
void warranty.

Clamp sequencing must always occur above 2.5 MPa.

Operating Pressure (MPa)	4.0 kN Work Support Capacity (kN)	25 Bore Swing Clamp Force (kN)*	Swing Clamp to Work Support Support Ratio	25 Bore Link Clamp Force (kN)**	Link Clamp to Work Support Support Ratio
Clamp to Support Ratios
7.0	4.0	1.7	2.4	1.5	2.7
6.0	3.3	1.4	2.4	1.3	2.6
5.0	2.7	1.2	2.3	1.1	2.5
4.0	2.0	0.9	2.1	0.9	2.2
ILML10005-4.0 REV A		* Using L9-1425-01 Arm		** Using L9-1625-03 Lever

Operating Pressure (MPa)	5.5 kN Work Support Capacity (kN)	32 Bore Swing Clamp Force (kN)*	Swing Clamp to Work Support Support Ratio	32 Bore Link Clamp Force (kN)**	Link Clamp to Work Support Support Ratio
Clamp to Support Ratios
7.0	5.5	3.2	1.7	2.9	1.9
6.0	4.6	2.7	1.7	2.5	1.8
5.0	3.7	2.3	1.6	2.0	1.9
4.0	2.8	1.8	1.6	1.6	1.8
ILML10005-5.5 REV A		* Using L9-1432-01 Arm		** Using L9-1632-03 Lever

Operating Pressure (MPa)	10 kN Work Support Capacity (kN)	40 Bore Swing Clamp Force (kN)*	Swing Clamp to Work Support Support Ratio	40 Bore Link Clamp Force (kN)**	Link Clamp to Work Support Support Ratio
Clamp to Support Ratios
7.0	10.0	5.1	2.0	4.5	2.2
6.0	8.3	4.4	1.9	3.9	2.1
5.0	6.7	3.7	1.8	3.2	2.1
4.0	5.0	2.9	1.7	2.6	1.9
ILML10005-10 REV A		* Using L9-1440-01 Arm		** Using L9-1640-03 Lever

Operating Pressure (MPa)	16 kN Work Support Capacity (kN)	50 Bore Swing Clamp Force (kN)*	Swing Clamp to Work Support Support Ratio	50 Bore Link Clamp Force (kN)**	Link Clamp to Work Support Support Ratio
Clamp to Support Ratios
7.0	16.0	7.6	2.1	7.6	2.1
6.0	13.3	6.5	2.0	6.5	2.0
5.0	10.7	5.4	2.0	5.4	2.0
4.0	8.0	4.3	1.9	4.4	1.8
ILML10005-16 REV A		* Using L9-1450-01 Arm		** Using L9-1650-03 Lever

Operating Pressure (MPa)	26 kN Work Support Capacity (kN)	63 Bore Swing Clamp Force (kN)*	Swing Clamp to Work Support Support Ratio	63 Bore Link Clamp Force (kN)**	Link Clamp to Work Support Support Ratio
Clamp to Support Ratios
7.0	26.0	12.0	2.2	12.6	2.1
6.0	21.7	10.3	2.1	10.8	2.0
5.0	17.3	8.6	2.0	9.0	1.9
4.0	13.0	6.9	1.9	7.2	1.8
ILML10005-26 REV A		* Using L9-1463-01 Arm		** Using L9-1463-03 Lever

Call Us:	800-992-0236	Home \| About Us \| Products \| Catalogs \| CAD Library \| Resources \| FAQ/Help \| Careers \| Events \| Contact Us \| Members
+1-	913-365-1045	PO Terms & Conditions © Copyright 1996 - 2025 Vektek LLC