Specifications
41-0060-07
4.4
Base
17.5
6.5
24 x 33.5 x 44.5
49.5
0.16
41-0061-07
Cartridge
N/A
41
41-0060-06
11
35.5
9.5
25 x 41.5 x 59
61
0.33
41-0061-06
52.5
41-0060-04
33.4
89
12.5
25 x 63.5 x 76
98
1.64
41-0060-05
55.6
253.5
19
31.5 x 89 x 97
114
4.26
* Support capacities are listed at 350 bar (35 MPa) maximum operating pressure. Support capacities for other pressures must be determined by consulting the Capacity Charts.
** Contact force at 1.7 bar (.17 MPa) maximum. To lower the contact force, install an air filter regulator of appropriate size.
*** For cartridge mounted models, see the Cavity Dimensions tab.
NOTE: Minimum fluid pressure is 36 bar (3.6 MPa)
DIN ISO 2768 T1 and T2 not applicable
For Supporting Fragile Parts or use in Harsh Environments
Special large diameter plungers and sleeves provide greater rigidity.
Continuous flow of air, can serve as an "air spring" and be left connected during machining. This "air spring" effect helps keep harsh contaminants from getting between the plunger and sleeve. This is an excellent support choice when using double acting cylinders. You should observe air bubbles escaping around the plunger when used in this manner.
Dimensions
M26 x 1.5
25
24
5.5
23
16
M35 x 1.5
33
30
20.5
Cavity Dimensions Model No. 41-0061-00
Cavity Dimensions Model No. 41-0061-01