Plungers stay retracted during part loading. Hydraulic pressure advances the plunger exerting only spring force as it makes contact with the part. Hydraulic pressure then automatically sequences, freezing the plunger, to properly support the part.
Standard G Series porting and alternate o-ring manifold face seal is located in the base of the support for bolt down installation. The base can be removed for direct cartridge mounting.
* Support capacities are listed at 350 bar (35 MPa) maximum pressure. Support capacities for other pressures are shown in the fluid advance High Capacity and Part Present Sensing load capacity chart. ** Restrict flow rate to a maximum of 2.13 l/min.
*** For cartridge mount models, see cavity dimensions. **** In-Port Valves require the use of manifold mount ports.
Dimensions
Model No.
A
B
C
D
E
F
G
H
J
M
V
W
Cartridge Mount, High Capacity Fluid Advance Work Support
41-0704-10
M20 X 1.5
41.3
6.5
33.6
3.2
5.3
18
9.5
2.8
18.1
7
M6 X 1 X 3.5
41-0706-10
M26 X 1.5
54.2
43.7
6.3
5.5
23
14.3
3.6
23.3
13
M8 X 1.25 X 5
41-0706-16
66.9
12.5
55.4
M10 X 1.5 X 5
41-0706-17
M30 X 1.5
9
28.3
41-0708-10
M35 X 1.5
72.5
58.1
8.5
9.3
30
19
4.8
29.7
17
M12 X 1.75 X 6.5
41-0708-16
85.2
67.9
41-0710-10
M45 X 1.5
101.6
15.8
81.7
10.2
38
25.4
7.9
42.9
21
M15 X 1 X 8
Normally retracted plungers do not interfere with part loading. Advance them with hydraulic pressure, exerting only spring force to bring the plunger into contact with your part. Hydraulic pressure then automatically sequences, "freezing" the plunger properly against the part.
Standard G Series and alternate o-ring manifold face seal is located in the base of the support for bolt down installation. The base can be removed for direct cartridge mounting.
*** For cartridge mount models, see cavity dimensions. **** For complete dimensions, see Fluid Advance Work Supports.
* Inner O-Ring and optional Outer Seal are both supplied with the assembly.
Use Inner O-Ring or Outer Seal but not both.
The Inner O-Ring is the preferred option.