Advanced Workholding Pump
Look no further for a long lasting and easy to use advanced workholding pump. The durable 2-Stage design of this pump stands up to high demand circuits along with high or low duty cycles. To help extend the life of the pump and valves, the high pressure output and low pressure returns are filtered. With a 18.9 liter reservoir, the oversized fill tube makes refilling simple!
Valves usually mounted on the machine closer to the application.
Typically mounted behind or between 2 machines.
Can use coupled or uncoupled.
Recommended to run a continuously connected or single hose supply decoupled system.
Operator interface is a manual valve handle.
Pump located within operators reach.
1
45-9575-12-1
Recommended to run a continuously connected or single hose supply decoupled system where, the pressurized time exceeds the unpressurized time.
Operator interface is by remote pendant or can be wired into a machine controller.
NOTE: Should not be used with palletized systems as the valve is energized to unclamp. The unclamped time will be excessive, causing the valve to run hot.
2
4
45-9565-23-1
45-9565-23-2
45-9565-23-4
45-9575-23-1
45-9575-23-2
45-9575-23-4
45-9595-23-1
45-9595-23-2
45-9595-23-4
Recommended for continuously connected "live" systems.
Always connected to the fixture by means of hoses and or rotary unions.
45-9575-16-1
45-9595-16-1
Always connected to the fixture - by means of hoses and/or rotary unions.
Center position allows no movement of clamps when the valve is de-energized.
45-9565-26-1
45-9565-26-2
45-9565-26-4
45-9575-26-1
45-9575-26-2
45-9575-26-4
45-9595-26-1
45-9595-26-2
45-9595-26-4
Operator interface is by a manual valve handle.
Pump located within operators.
Single Acting Decoupled Systems
Valve installed with a control pendant to power systems using the Self-closing Decoupler and Tombstone Top Plates.
Commonly called a "dump pump" and uses a momentary contact pendant switch.
When preset pressure is reached the control valve automatically shifts and dumps pressure back to tank.
45-9575-25-1
45-9595-25-1
Single Acting Live systems.
Use with Manual Pallet Decouplers, Tombstone Top Plates and Self-Closing (single hose) Decouplers
NOTE all decoupled valves are de-energized when not in use to avoid heat build up between cycles.
45-9565-24-1
45-9565-24-2
45-9565-24-4
45-9575-24-1
45-9575-24-2
45-9575-24-4
45-9595-24-1
45-9595-24-2
45-9595-24-4
Double or Single Acting run live or decoupled.
Control Auto-Shutoff Pallet Decoupler (2 hose system)
Best selection for fixture testing, runs most systems.
45-9565-17-1
Reduces pressure to clamp or unclamp side of a circuit.
Use with one or two handed Auto-Shutoff Decoupler.
P-blocked center valve drops pressure in both lines. Allows decoupling and re-coupling of the hoses.
used to operate two individual single acting systems at different pressures.
Operator interface is remote pendant or wired into a machine controller.
45-9565-28-1
Double or Single Acting.
Use 1 or 2 handed Auto-Shutoff Pallet Decoupler.
Uses a P-Blocked center to drop pressure in both lines to decouple and re-couple hoses.
45-9565-27-1
45-9565-27-2
45-9565-27-4
45-9575-27-1
45-9575-27-2
45-9575-27-4
45-9595-27-1
45-9595-27-2
45-9595-27-4
ILMV459503 and ILMV459504 REV C
Warning: The use of spool valves invalidates the warranty on VektorFlo® pumps.
Note: 525-600V, 3-Phase service input pumps are available upon request for all convenience packages and configurations of 45-9585-XX-X
- Valve Wiring Cable (one for each valve). - Pump/Machine Tool Interface Cable (all pump control in one cable) - Temperature switch upgrade to oil level switch. - Electronic clog indicator upgrade to visual return line filter. - Mechanical pressure switch (no power required). - Electronic pressure switch (24V power required). - Manual or solendoid directional control valve functions. - Check Valve (for multiple manual valves in stack). - Pressure reducing valves for each circuit. - Accumulator (for small or low pressure systems). - Extra pendant switches (1 supplied with each different solenoid valve on pump for setup and testing). - 2-Hand No-Tie-Down Control Module (for use with decoupled systems only)
Pendant Switch Control (1 included with 1st valve of pump)
CNC Machine Control
ILMV459505 REV E
Valve Wiring Cable, M12, 5 pin (add one cable per valve)
Pump/Machine Tool Interface Cable, 24 pin or 36 pin, Single Connection
Contact your sales representative for details.
ILMV459506 REV F