Specifications
42-1010-00
2.4
5.2
M16 x 1.5
28
0.7
0.3
42-1010-01
4.4
7
M20 x 1.5
38
1.3
0.8
42-1010-02
9.5
35
2.7
42-1010-03
19
62
5.5
42-1010-04
17.5
8
M35 x 1.5
37.5
5.1
4.0
** Cylinder capacities are listed at 350 bar (35MPa) maximum operating pressure. The output force is can be adjusted by varying hydraulic system pressure. To calculate the approximate output force for an application, multiply the Piston Area by the system operating pressure. Actual force may vary slightly due to frictional losses, seal and wiper drag and/or return spring forces.
Single Acting
Special tough wipers help keep chips and contaminants out on all cylinder sizes
Positive piston stop shoulder keeps the spring from "bottoming out", guarding against premature spring failure which can plague other cylinder brands
BHC™ (Black Hard Coating) on the cylinder bodies helps prevent scoring and scratching. After years of use, cylinder removal is easier because of BHC's corrosion resistance.
Cartridge models use a gasket to seal against the cavity bottom
Dimensions
5
0.5
4.5
13
N/A
6.5
13.5
37
25
1.5
16
16.5
34.5
15.5
42.5
M6 x 1.0 x 11
2.5
27
M6x 1.0 x 12.5
31
All dimensions are in mm.
Cavity Dimensions
40
20
14.52
13.84
54
30
18.52
16.81
60
50
33.52
31.19
22
7.0
When both metal and composite gaskets are supplied, choose only one gasket.
*Both metaI and composite gaskets are suppIied. Use onIy one gasket. The metal gasket is recommended when the cavity seal surface has a very smooth finish and is flat and perpendicular to the minor diameter. The metal gasket must be torqued to a higher value, which is more resiIient to machine vibrations providing long term sealing. The composite gasket is recommended when the cavity seal surface has a rough surface finish or is not flat.