Metric

Metric Fluid Advance Work Supports

Specifications Model No. Support Capacity* (kN) Mounting Style Contact Force (N) Stroke (mm) Base Dimensions (mm) Retracted Height (mm) Oil Capacity (cm3) Fluid Advance Work Support, hydraulic pressure pushes a spring which lifts plunger; hydraulic pressure locks in place. 41-0070-04 4.4 Base/Manifold 4.4 - 26.7 6.5 23 x 33.5 x 44.5 62.5 2.6 41-0070-14 6.2 12.5 75 2.8 41-0071-04 4.4 Cartridge 6.5 N/A 53.5 1.3 41-0071-14 6.2 12.5 66.5 1.5 41-0171-12 7.3** 67 41-0070-03 11 Base/Manifold 13.5-44.5 6.5 31.5 x 41.5 x 58.5 82.5 3.1 41-0070-13 13.4 12.5 95.5 3.4 41-0071-03 11 Cartridge 6.5 N/A 72 2 41-0071-13 13.4 12.5 84.5 2.3 41-0070-05 17 Base/Cartridge 26.5-53.5 25 x 73 x 81 82.5 10.7 41-0071-05 Cartridge N/A 72.5 9.7

* Support capacities are listed at 350 bar (35 MPa) maximum operating pressure. Support capacities for other pressures must be determined by consulting the Capacity Charts.

** Interchangeable with many competitive products.

Note:

1. Restrict the flow rate to a maximum of 2.13 l/min

2. Minimum fluid pressure 52 bar (5.2 MPa)

3. DIN ISO 2768 T1 and T2 not applicable

4. The maximum system back-pressure a fluid advance work support can overcome is 0.7 bar(0.007 MPa). Return back-pressure greater the  0.7 bar (0.07MPa)
   may cause slow or failed retraction.

Metric Fluid Advance Work Supports

For Retracted Plunger Applications

Metric Fluid Advance Work Supports

Dimensions

	For proper sealing, the mating surface must be flat within a 0.08 mm maximum surface roughness of 1.6 mµ Ra
Dimensions Model No.** A B C D E F G H Fluid Advance Work Support, hydraulic pressure pushes a spring which lifts plunger; hydraulic pressure locks in place 41-0070-04 41-0070-14 M26 x 1.5 62.5 75 6.5 12.5 28.5 41 23 5.5 23 16 41-0070-03 41-0070-13 M35 x 1.5 82.5 95.5 6.5 12.5 34 47 31.5 9 30 20.5 41-0070-05 M60 x 1.5 82.5 12.5 40 25 12.5 54 38 Model No.** J K L M N P Q R S Fluid Advance Work Support, hydraulic pressure pushes a spring which lifts plunger; hydraulic pressure locks in place 41-0070-04 41-0070-14 3.5 33.5 16.5 24.4 12.2 44.5 17.5 31 13 41-0070-03 41-0070-13 5 41.5 21 30.2 15.1 58.5 24 43.1 18.3 41-0070-05 5 73 36.5 52.4 26.2 81 36.5 62.6 26.2 Model No.** T V W X Y Z AA AB AC Fluid Advance Work Support, hydraulic pressure pushes a spring which lifts plunger; hydraulic pressure locks in place 41-0070-04 41-0070-14 5.6 13 M8 x 1.25 x 5 M10 x 1.5 x 5 G 1/8 9 8.5 7 9.7 17.5 41-0070-03 41-0070-13 7.1 19 M12 x 1.75 x 6.5 G 1/8 10.5 10.5 N/A N/A N/A 41-0070-05 7.1 19 M12 x 1.75 x 6.5 G 1/8 16 10.5 N/A N/A N/A

** All models have one manifold mount pressure port that is plugged at the time of assembly. Refer to drawing ILMV100706 for the manifold mount pressure port location. For manifold mounting, remove the port plug and install the o-ring (provided) atfinal installation.

Fluid Advance Work Supports

Cavity Dimensions Model No. 41-0071-04

Cavity Dimensions Model No. 41-0171-12 & 41-0071-14 Cavity Dimensions Model No. 41-0071-03 & 41-0071-13

Cavity Dimensions Model No. 41-0071-05

Self-Produced Contact Bolt

		For proper sealing, the mating surface  must be flat within 0.08 mm with a maximum surface roughness of 1.6 mµ Ra
Dimensions Model No. Capacity O-Ring Part No. A B C D E Fluid Advance Work Supports, hydraulic pushes a spring which lifts the plunger;   hydraulic pressure locks in place. 41-0704-10 41-0804-20 4.4 High Capacity 39-0511-72 (4.7 x 1.0 mm) 7.54 3.58 4.75 1.02 M8 x 1.25 - 6G 41-0070-04 41-0071-04 4.4 Std. Stroke 39-0510-59 (6 x 1.5 mm) 9.75 5.0 6.05 1.19 M8 x 1.25 - 6G 41-0070-14 41-0071-14 6.2 Long Stroke 39-0000-69 (7.65 x 1.63 mm) 11.43 5.0 7.67 1.19 M10 x 1.5 - 6G 41-0171-12 7.3 Long Stroke 39-0000-69 (7.65 x 1.63 mm) 11.43 5.0 7.67 1.19 M10 x 1.5 - 6G 41-0706-10 41-0806-10 41-0806-20 8.9 High Capacity 39-0510-59 (6 x 1.5 mm) 9.75 5.0 6.05 1.19 M8 x 1.25 - 6G 41-0706-16 41-0706-17 41-0806-16 41-0806-26 8.9 High Capacity Long Stroke 39-0000-69 (7.65 x 1.63 mm) 11.43 5.0 7.67 1.19 M10 x 1.5 - 6G 41-0070-03 41-0071-03 11 Std. Stroke 39-0020-09 (9.25 x 1.78 mm) 14.1 6.35 9.91 1.78 M12 x 1.75 - 6G 41-0070-13 41-0071-13 13.4 Long Stroke 39-0020-09 (9.25 x 1.78 mm) 14.1 6.35 9.91 1.78 M12 x 1.75 - 6G 41-0070-05 41-0071-05 17 Long Stroke 39-0020-09 (9.25 x 1.78 mm) 14.1 6.35 9.91 1.78 M12 x 1.75 - 6G 41-0708-10 41-0808-10 41-0808-20 17.8 High Capacity 39-0020-09 (9.25 x 1.78 mm) 14.1 6.35 9.91 1.78 M12 x 1.75 - 6G 41-0708-16 41-0808-16 41-0808-26 17.8 High Capacity Long Stroke 39-0020-09 (9.25 x 1.78 mm) 14.1 6.35 9.91 1.78 M12 x 1.75 - 6G 41-0710-10 41-0810-20 35.6 High Capacity 39-0511-76 (12 x 2 mm) 17.28 7.95 12.90 2.03 M15 x 1 - 6G All dimensions are in mm.

Fluid Advance Accessories

Feeder Caps Model No. A B C D 40-9872-40 M26 x 1.5 23 14.5 32 40-9872-43 M35 x 1.5 30 21.5 41.5 40-9872-47 M60 x 1.5 23.5 15 66.5

Machining Specifications Capacity B C 4.4 kN M26 x 1.5 37 11 kN M35 x 1.5 48 17 kN M60 x 1.5 77

Fluid Advance Work Support Shield  Shield Model No. Work Support Model No. A B C D 41-0704-01 41-0704-10 41-0804-20 10.7 12.7 8.2 23.1 41-0707-01 41-0070-04 41-0071-04 41-0706-10 41-0806-10 41-0806-20 16.8 12.7 7.6 28.2 41-0703-01 41-0070-14 41-0071-14 16.8 22.4 16.8 28.4 41-0702-01 41-0171-12 41-0706-17 17.3 21.8 14.2 32.8 41-0701-01 41-0070-03 41-0070-13 41-0071-03 41-0071-13 41-0708-10 41-0808-10 41-0808-20 21.6 19.3 9.2 37.6 41-0715-01 41-0070-05 41-0071-05 23.4 25.4 14.7 59.9