Plungers stay retracted during part loading while air flow travels through the work support. Hydraulic pressure advances the plunger exerting only spring force as it makes contact with the part. This closes the integral air valve to indicate part is present and contacted. Hydraulic pressure then automatically sequences, “freezing” the plunger. Available in 8.9 kN or 17.8 kN capacity. Order with four bolt base or cartridge only. Once support is locked, air sensing positively confirms both contact and part present. Use Vektek’s Air Sensing Control Kit 45-0824-00 for easy setup. Four bolt base is compatible with Vektek In The Port Flow Control and In The Port Sequence Valves. O-Ring face seal design makes machining cavities easier. Max air operating pressure is 1 bar.
Standard G-Series porting and alternate O-Ring manifold face seal is located in the base of the support for bolt down installation. The base can be removed for direct cartridge mounting.
* Support capacities are listed at 350 Bar maximum pressure. Support capacities for other pressures are shown in the fluid advance High Capacity and Part Present Sensing load capacity chart. ** Restrict flow rate to a maximum of 2.13 l/min.
*** For cartridge mount models, see cavity dimensions. **** In-Port valves require the use of manifold mount ports.
41-0806-20-PS
41-0806-26-PS
41-0808-20-PS
41-0808-26-PS
M8 X 1.25 X 5
M10 X 1.50 X 5
M12 X 1.75 X 6.5
10
13
Dimensions
Model No.
A
B
C
D
E
F
G
H
J
M
V
W
Cartridge Mount, Part Present Sensing Fluid Advance Work Support
41-0706-10-PS
M26 x 1.5
57.8
6.5
43.7
6.3
5.5
23
14.3
7.1
23.3
11
41-0706-16-PS
70.6
12.5
55.4
M10 X 1.5 X 5
41-0708-10-PS
M35 X 1.5
77.2
58.1
8.5
9.3
30
19
9.5
29.7
17
41-0708-16-PS
89.7
67.9
*Retaining ring, adapter, and o-ring may be ordered as needed.