Metric

* Clamp capacities are listed at 350 bar (35 MPa) maximum operating pressure with a standard length link clamp lever installed. Minimum operating pressure is 35 bar (3.5 MPa) for double acting devices. The clamping force is adjustable by varying the hydraulic system pressure. (Actual force will vary slightly due to mechanical inefficiencies and friction.)

** Equal to +/- 3˚ with standard lever.

*** To insure maximum service life and trouble-free operation, restrict fluid flow to the above flow ratings when clamping. If you are unable to measure flow rates, the devices should be positioned in no less than 1/2 second. These recommendations apply when using the standard lever. When using the optional long lever or your custom lever, please restrict the flow rates to position the lever in no less than 1 second.

**** In-port flow control requires the use of manifold mount ports.

• Patented rotary lug feature delivers 360° of lever positioning. Simply rotate the lug and lever over
  the desired clamping location and torque the
  set screws.
• Maximum clamping force - Minimal footprint.
• Available in five sizes from 2.4 kN to 16 kN capacities at 7 MPa (70 bar).
• Operate at any pressure without pressure reducing the clamp.
• Excellent alternative to a swing clamp when swing space or hydraulic pressure is limited.
• Levers sold separately.
• Link Clamp Levers and Work Supports are paired to clamp over centerline of work support.
• Optional in-port flow control is a meter-in device with reverse free flow check valve.