Metric

* Cylinder capacities are listed at 350 bar(35 MPa) maximum operating pressure, with a standard length VektorFlo^® arm installed. Minimum operating pressure is 52 bar (5.2 MPa) for single acting, 35 bar
(3.5 MPa) for double acting. The clamping force is adjustable by varying the hydraulic system pressure. To determine the approximate output force for your application, divide the cylinder capacity shown above by 5,000, and multiply the Resultant Number X Your System Operating Pressure to obtain the approximate clamping force for your application. (Actual force will vary slightly due to internal cantilever loading, friction loss and/or return springs.)

** To allow for piece part height variations, it is recommended that the vertical travel be set at about 50% of the vertical stroke.

*** To ensure maximum service life and trouble-free operation, restrict fluid flow per Clamp Time and Fluid Flow Rates Table

• Available in sizes from 2 kN, to 11.6 kN at 350 bar (35 MPa) pressure.
• Simply the easiest to use manifold mount design on the market today. No precision installation holes, no precisely located ports, no special mounting hardware, only our special patented design.
• Unique, bolt up, bolt down or standard ported "foot" design allows you the maximum flexibility in fixture design
• Standard models swing is 90° with swing angles of less than 90° readily available, see page C-29. Swings of more than 90° are special order products.
• Optional In-Port Flow Control is a meter-in device with reverse free flow check valve.
• Optional In-Port Sequence valve is a sequencing device with reverse free flow check valve.
• See metric Clamp Time and Fluid Rate charts for time and rates to avoid cylinder damage and preserve warranty
• Standard Metric Arm Clocking feature uses standard Vektek Arms
• Arms sold separately

Easily installed using standard cap screws. The large base and one piece mounting give this clamp excellent rigidity.

U.S. Patent No. 7,032,897

All dimensions are in mm.