Specifications
41-0050-07
4.4
Base
4.5 - 9
6.5
24 x 33.5 x 44.5
56
0.16
41-0051-07
Cartridge
N/A
47.5
41-0050-06
11
9 - 26.5
9.5
25 x 41.5 x 59
70.5
0.33
41-0051-06
62
41-0050-04
33.4
40 - 80
12.5
25 x 63.5 x 76
111
1.64
41-0050-05
55.6
49 - 71
19
31.5 x 89 x 97
133
4.26
* Support capacities are listed at 350 bar (35 MPa) maximum operating pressure. Support capacities for other pressures must be determined by consulting the Capacity Charts.
NOTE: Minimum fluid pressure is 52 bar (5.2 MPa)
NOTE: DIN ISO 2768 T1 and T2 not applicable
For minimum operating pressures and resulting capacities, see Capacity Charts.
Proprietary wiper and seal designs reduce contamination and drag for longer lasting, better performing work supports.
Special corrosion resistant plungers and sleeves reduce the tendency to stick.
Hand fitted plunger/sleeve assemblies allow VektorFlo® work supports to begin to lock at lower pressures and build support faster.
If spring advance supports must be used in flood coolant environments (we recommend Air Advance) attach tubing to the vent port and route to clean, dry air to keep coolant from being drawn in and becoming sticky on internal surfaces.
Dimensions
M26 x 1.5
25
24
5.5
23
16
M35 x 1.5
33
30
20.5
*Support capacities are listed at 350 bar (35 MPa) maximum operating pressure.
Support capacities for other pressures must be determined by consulting the graphs ILMV100507 and ILMV100508.
Capacity Charts
Cavity Dimensions Model No. 41-0051-00
Cavity Dimensions Model No. 41-0051-01