Specifications
41-5711-11 41-5711-12 41-5711-13 41-5711-14
41-5711-15 41-5711-16 41-5711-17 41-5711-18 41-5711-19
NOTE: For manifold mounting, remove the M5 screw and sealing washer and insert the o-ring (included). For proper sealing, mating surfaces should be flat within .08, with maximum surface roughness of 1.6 µm Ra.
All dimensions are in mm.
Maximum operating pressure 350 bar (35 MPa)
Minimum operating pressure 30 bar (3 MPa)
Single Acting Pull-Down Clamp, Concentric
Body, sleeves and draw bar are made of nitride-hardened alloy steel for longer trouble-free life.
Clamping sleeves are segmented and serrated to form and grip the clamping hole.
These Pull-Down Clamps also serve as a support surface and "Z" locator for the workpiece.
Dimensions
8.5
9.5
53
10.5
11.5
12.5
13.5
14.5
15.5
16.5
17.5
18.5
19.5
20.5
21.5
22.5
23.5
24.5
8.8-9.7
9.8-10.7
10.8-11.9
12-12.9
13-13.9
14-14.9
15-15.9
16-16.9
17-17.9
18-18.9
19-19.9
20-20.9
21-21.9
22-22.9
23-23.9
24-24.9
25-25.9
NOTE: For single acting clamping elements there is a risk of drawing in coolant during return stroke. In this case the clamping element has to be protected against the direct effect of coolant. The built in sinter metal breather should be covered.