Hydraulic

3 Position, 4 Port Control Valves Manual

Specifications Model No. Description Seals Fluid Flow Max. Tank Port Pressure 71-1472-02 Closed Center Buna N Teflon* 1.5 gpm 250 psi Max 71-1474-02 P-Blocked Center Buna N Teflon* 71-3472-01 Closed Center Buna N Teflon* 71-3474-01 P-Blocked Center Buna N Teflon*

These valves can be used to control a double acting workholding system. (May also be used to control single acting systems). Rotary handle motion uses a rotary bearing. Heat treated rotor and poppets are spring and pressure loaded against each other to provide positive fluid control for hundreds of thousands of cycles. All valves ship with short and long handles. Handle orientation can be adjusted in 45° increments. Standard length mounting bolts provided. (#10-24)

 NOTE: Maximum system flow rate is 1.5 gpm (346.5 cu. in. per minute) for all VektorFlo^® special function valves. Excess flow voids warranty.

3 Position, 4 Port Control Valves

Solenoid

Provide improved control of clamping circuits with true poppet design. Multiple coil voltages available. Internal design promotes improved service life. Narrow width allows mounting of multiple valves on standard D03 manifolds. All valves have built-in P-block check for fail safe multi-valve operation. Coils can be easily replaced.

*Supplied with rectified DIN connectors that must be used to insure proper valve function and maintain warranty. Use of any other connector will void the warranty.