
	Rapid Order View Cart Login Sign Up

Hydraulic

Ultrasonic Position Sensing Clamps
Double Acting Work Supports
- Top Flange
- Position Sensing
  - Top Flange PS
Work Supports
- High Capacity Fluid Advance
- Part Present Sensing
- 20,000 lb. Air & Spring
- Air Advance
- Spring Advance
- Fluid Advance
TuffCam™ Swing Clamps
- Threaded Body
- Top Flange
- Top Flange Long Stroke
- Bottom Flange
- Bottom Flange Long Stroke
- Cartridge
- Rod Position Sensing System
- Magnetic Position Sensing System
- TuffCam Low Profile Top Flange
- TuffCam Low Profile Bottom Flange
- TuffCam Low Profile Rod Position Sensing
- TuffCam Low Profile Magnetic Position Sensing
VersaCam™ Swing Clamps (Standard)
- Threaded
- Long Stroke
- Flow Control
- Top Flange
- Bottom Flange
- Cartridge
Swing Clamp Arms
- Standard Arms
- Rocker Arms
- Low Profile Arms
Link Clamps
- TuffLink ™ 360˚
- High Pressure
- Low Pressure
- Levers
Special Use Clamps
- Centering Clamps
- Part Crowder
- ID Expansion Clamps
- Power Pin Part Crowder
- Pull-Down Clamps
- Edge Clamps
- Retract Clamps
- Collet Vises
  - 5-C Collet Vise
  - Air Collet Vise
Cylinders
- Block Body Pull Cylinder
- Threaded Mini
- Threaded
- Block
- Manifold Block
- Hollow Rod
- Cartridge Mount Mini
- Cartridge Mount Push/Pull Cylinder
- Slip-in Cartridge Pull Cylinders
- Easy Mount Cylinder
Push/Pull Cylinders
- Threaded
- Top Flange
- Bottom Flange
- Cartridge Mount
- Block Pull Cylinder
Fittings
Rotary Unions
- HDX Heavy Duty Rotary Union
- Single Path
- Dual Path
- Quad Path
- 6 Path
- 8 Path
- 12 Path
- Rotary Union Arm
Misc. Plumbing
- Manifolds
- Hoses and Tubing
Power Supplies
- Compact Air/Hydraulic Booster
- Booster with Control Package
- Air/Hydraulic Pump
- 1/3 HP Electric Pump
- 1-HP Advanced Workholding Pump
- 2-HP Advanced Workholding Pump
- 2-HP Low Pressure Advanced Workholding Pump
- Advanced Automation Workholding Pump (HMI)
- Advanced Automation Workholding Pump (Okuma)
- Advanced Workholding Pump Cart
- Screw Pumps
- Compact Air/Hydraulic Pump
- Fixture Test Pump
Pallet Fixture Accessories
- Auto-coupler
- Accumulators
- Automatic Shutoff Valve Decouplers
- Manual Shutoff Valve Decouplers
- Tombstone Top Plates
- Thread-in Coupling Element
- Guardian Pallet Monitoring
- Guardian 2.0
Hardware
- Mounting Hardware
- Swing/Link Clamp Spacers
- End Effectors
- Dura Pin Part Crowder
- Fixture Components
Accessory Valves
- In The Port Sequence Valves
- Air Sensing Control Kit
- Filter Plate
- In-Port Flow Control Valves
- In-Line Flow Control Valve
- Shutoff Valve
- Check Valves
- Filters
- Unclamp Delay Valve
- Sequence Valves
- Sequence/PRV Combination
- Pressure Limiting Valves
- Pressure Reducing Valves
- Low-High Valve
- Alternating Valve
- Pressure Switch
- Over Pressure Relief Cartridge
- Pressure Gauges
- Pneumatic Confirmation Valve
Directional Control Valves
- 2 Position / 3 Port
- 3 Position / 4 Port
- Manual Valve Handle Kit
- Valve Subplates
Zero-Point Systems
- Hydraulic Modules
- Hydraulic Modules, Automation
- Hydraulic Modules, Center Lock
- Pneumatic Modules
- Pneumatic Modules, Single Acting
- Pneumatic Modules, Automation
- Pull-studs
- Engagement Screws
Concepts / Applications
VektorFlo® Catálogo Español
Safety

You have 0 item(s)
in your cart.
View Cart

Hydraulic

6 Path

Home > Products > Hydraulic > Rotary Unions > 6 Path
6 Path (PDF 403.00 KB)

Dimensions

6 Path Rotating Union

Operating Parameter Guidelines:

Max Pressure: 5,000 psi
Max. Vacuum: 30 Hg
Max. RPM under vacuum: contact factory
Max RPM under pressure: see table
Max Operating Temperature with slip ring 0 - 176° F
Max Operating Temperature without slip ring 0 - 220° F
Air may be run in any available passage
Rotating unions are not intended to be a structural member. It is recommended that the anti-rotate arm should attach to the stationary part of the union and should be minimized. Please contact Vektek for technical assistance.
Seperate air and fluid wih extra passage between each.

For proper sealing, mating surface must be flat within 0.003 in. with a maximum 32 µin R_a surface finish.

Installation Instructions

Model No.	Hydraulic Input Connection	Electrical Slip Ring Option	Maximum Current/Circuit	Maximum Volts/Circuit	Lead Wire Length	Optional Steel Mounting Flange Model No. **	Optional Cordset***
6 Path Rotary Union
32-6246-00	SAE 4	N/A	N/A	N/A	N/A	93-2620-00	N/A
32-6246-00-ES6A		6 Circuit	2 Amp	120 VAC / 120 VDC	48"		27-6424-01
32-6246-00-ES12A		12 Circuit	2 Amp	120 VAC / 120 VDC	48"		27-6424-02
32-6246-01	O-ring Face Seal*	N/A	N/A	N/A	N/A		N/A
32-6246-01-ES6A		6 Circuit	2 Amp	120 VAC / 120 VDC	48"		27-6424-01
32-6246-01-ES12A		12 Circuit	2 Amp	120 VAC / 120 VDC	48"		27-6424-02

* O-rings furnished: -010, 70A, NBR Part No. 55-2500-01
**Optional Mounting flange includes

6 SHCS 1/4-20 x 1/2 Part No. 21-4100-63
6 O-rings -010, 70A NBR Part No. 55-2500-01
1 O-rings -012, 70A NBR Part No. 39-0020-09
1 O-rings -013, 70A NBRPart No. 39-0000-72

*** Order separately

Rotational Torque

Operating Limits

Opeating Limits

DimensionsRotational TorqueOperating Limits

6 Path Rotating Union

Operating Parameter Guidelines:

Max Pressure: 5,000 psi
Max. Vacuum: 30 Hg
Max. RPM under vacuum: contact factory
Max RPM under pressure: see table
Max Operating Temperature with slip ring 0 - 176° F
Max Operating Temperature without slip ring 0 - 220° F
Air may be run in any available passage
Rotating unions are not intended to be a structural member. It is recommended that the anti-rotate arm should attach to the stationary part of the union and should be minimized. Please contact Vektek for technical assistance.
Seperate air and fluid wih extra passage between each.

For proper sealing, mating surface must be flat within 0.003 in. with a maximum 32 µin R_a surface finish.

Installation Instructions

Model No.	Hydraulic Input Connection	Electrical Slip Ring Option	Maximum Current/Circuit	Maximum Volts/Circuit	Lead Wire Length	Optional Steel Mounting Flange Model No. **	Optional Cordset***
6 Path Rotary Union
32-6246-00	SAE 4	N/A	N/A	N/A	N/A	93-2620-00	N/A
32-6246-00-ES6A		6 Circuit	2 Amp	120 VAC / 120 VDC	48"		27-6424-01
32-6246-00-ES12A		12 Circuit	2 Amp	120 VAC / 120 VDC	48"		27-6424-02
32-6246-01	O-ring Face Seal*	N/A	N/A	N/A	N/A		N/A
32-6246-01-ES6A		6 Circuit	2 Amp	120 VAC / 120 VDC	48"		27-6424-01
32-6246-01-ES12A		12 Circuit	2 Amp	120 VAC / 120 VDC	48"		27-6424-02

* O-rings furnished: -010, 70A, NBR Part No. 55-2500-01
**Optional Mounting flange includes

6 SHCS 1/4-20 x 1/2 Part No. 21-4100-63
6 O-rings -010, 70A NBR Part No. 55-2500-01
1 O-rings -012, 70A NBR Part No. 39-0020-09
1 O-rings -013, 70A NBRPart No. 39-0000-72

*** Order separately

Call Us:	800-992-0236	Home \| About Us \| Products \| Catalogs \| CAD Library \| Resources \| FAQ/Help \| Careers \| Events \| Contact Us \| Members
+1-	913-365-1045	PO Terms & Conditions © Copyright 1996 - 2024 Vektek LLC

Hydraulic

Hydraulic

6 Path

6 Path Rotating Union

For proper sealing, mating surface must be flat within 0.003 in. with a maximum 32 µin Ra surface finish.

Rotational Torque

Opeating Limits

For proper sealing, mating surface must be flat within 0.003 in. with a maximum 32 µin R_a surface finish.