Hydraulic

• Clamp with lower pressure to position parts then clamp with high pressure once sequence pressure has been met on the rest of the circuit.
• Common inlet port feeds both sequence and reducing valves in parallel.
• 5 (SAE 2) manifold ports: 3x Inlet and 2x Outlet.
• 4 (SAE 4) ports: 2 x Inlet, 2x Outlet.
• Use with single or double acting devices.
• Block includes standard Sequence and PRV cartridges.
• Can be sandwiched with a PRV/Sequence Combo block.
• Enough space is provided on the block to accommodate a Gauge for setup or troubleshooting.
• Recommended Filtration: 25 Micron (NOM) / 40 Micron (ABS) (minimum)

_{* SAE 2 Ports are counterbored for O-rings that are used in manifold mounting applications. Ø .09/.15 Feed Holes.}

_{** PRV Set Pressure Range is:150 - 900 PSI with an inlet pressure of <3,000 PSI, 300 - 900 PSI with an inlet pressure of >3,000 PSI.}

For Proper sealing, mating surface must be flat to 0.003 with a maximum 63 µ in. R_a surface finish.

Order a Filter Plate: 70-8420-01 to protect valves from debris.