
	Rapid Order View Cart Login Sign Up

Hydraulic

Ultrasonic Position Sensing Clamps
Double Acting Work Supports
- Top Flange
- Position Sensing
  - Top Flange PS
Work Supports
- High Capacity Fluid Advance
- Part Present Sensing
- 20,000 lb. Air & Spring
- Air Advance
- Spring Advance
- Fluid Advance
TuffCam™ Swing Clamps
- Threaded Body
- Top Flange
- Top Flange Long Stroke
- Bottom Flange
- Bottom Flange Long Stroke
- Cartridge
- Rod Position Sensing System
- Magnetic Position Sensing System
- TuffCam Low Profile Top Flange
- TuffCam Low Profile Bottom Flange
- TuffCam Low Profile Rod Position Sensing
- TuffCam Low Profile Magnetic Position Sensing
VersaCam™ Swing Clamps (Standard)
- Threaded
- Long Stroke
- Flow Control
- Top Flange
- Bottom Flange
- Cartridge
Swing Clamp Arms
- Standard Arms
- Rocker Arms
- Low Profile Arms
Link Clamps
- TuffLink ™ 360˚
- High Pressure
- Low Pressure
- Levers
Special Use Clamps
- Centering Clamps
- Part Crowder
- ID Expansion Clamps
- Power Pin Part Crowder
- Pull-Down Clamps
- Edge Clamps
- Retract Clamps
- Collet Vises
  - 5-C Collet Vise
  - Air Collet Vise
Cylinders
- Block Body Pull Cylinder
- Threaded Mini
- Threaded
- Block
- Manifold Block
- Hollow Rod
- Cartridge Mount Mini
- Cartridge Mount Push/Pull Cylinder
- Slip-in Cartridge Pull Cylinders
- Easy Mount Cylinder
Push/Pull Cylinders
- Threaded
- Top Flange
- Bottom Flange
- Cartridge Mount
- Block Pull Cylinder
Fittings
Rotary Unions
- HDX Heavy Duty Rotary Union
- Single Path
- Dual Path
- Quad Path
- 6 Path
- 8 Path
- 12 Path
- Rotary Union Arm
Misc. Plumbing
- Manifolds
- Hoses and Tubing
Power Supplies
- Compact Air/Hydraulic Booster
- Booster with Control Package
- Air/Hydraulic Pump
- 1/3 HP Electric Pump
- 1-HP Advanced Workholding Pump
- 2-HP Advanced Workholding Pump
- 2-HP Low Pressure Advanced Workholding Pump
- Advanced Automation Workholding Pump (HMI)
- Advanced Automation Workholding Pump (Okuma)
- Advanced Workholding Pump Cart
- Screw Pumps
- Compact Air/Hydraulic Pump
- Fixture Test Pump
Pallet Fixture Accessories
- Auto-coupler
- Accumulators
- Automatic Shutoff Valve Decouplers
- Manual Shutoff Valve Decouplers
- Tombstone Top Plates
- Thread-in Coupling Element
- Guardian Pallet Monitoring
- Guardian 2.0
Hardware
- Mounting Hardware
- Swing/Link Clamp Spacers
- End Effectors
- Dura Pin Part Crowder
- Fixture Components
Accessory Valves
- In The Port Sequence Valves
- Air Sensing Control Kit
- Filter Plate
- In-Port Flow Control Valves
- In-Line Flow Control Valve
- Shutoff Valve
- Check Valves
- Filters
- Unclamp Delay Valve
- Sequence Valves
- Sequence/PRV Combination
- Pressure Limiting Valves
- Pressure Reducing Valves
- Low-High Valve
- Alternating Valve
- Pressure Switch
- Over Pressure Relief Cartridge
- Pressure Gauges
- Pneumatic Confirmation Valve
Directional Control Valves
- 2 Position / 3 Port
- 3 Position / 4 Port
- Manual Valve Handle Kit
- Valve Subplates
Zero-Point Systems
- Hydraulic Modules
- Hydraulic Modules, Automation
- Hydraulic Modules, Center Lock
- Pneumatic Modules
- Pneumatic Modules, Single Acting
- Pneumatic Modules, Automation
- Pull-studs
- Engagement Screws
Concepts / Applications
VektorFlo® Catálogo Español
Safety

You have 0 item(s)
in your cart.
View Cart

Hydraulic

Cartridge

Home > Products > Hydraulic > TuffCam™ Swing Clamps > Cartridge
TuffCam Cartridge Mount (PDF 556.00 KB)

Specifications

TuffCam™ Cartridge Mount Swing Clamps

Specifications

Swing restrictors available.

Model No.	Swing Direction	Clamp Capacity (lb.)**	Vertical Clamping Stroke (in.)***	Total Stroke (Swing + Vertical)	SAE Body Thread	Standard Arm Length	Effective Piston Area (sq. in.)	Oil Capacity (cu. in.)****
Specifications
Model No.	Swing Direction	Clamp Capacity (lb.)**	Vertical Clamping Stroke (in.)***	Total Stroke (Swing + Vertical)	SAE Body Thread	Standard Arm Length	Retract	Extend	Retract
Single Acting (S/A) Cylinders, actuated hydraulically 1 direction, spring returned.
14-1105-01-R 14-1105-01-L 14-1105-01-S	Right Left Straight	450	.22 .22	0.57	1 1/16-12	1.06	0.098	N/A	0.056
14-1105-01-R 14-1105-01-L 14-1105-01-S	Right Left Straight	450	.57	0.57	1 1/16-12	1.06	0.098	N/A	0.056
14-1109-01-R 14-1109-01-L 14-1109-01-S	Right Left Straight	1100	.31 .31	0.79	1 5/8-12	1.50	0.295	N/A	0.233
14-1109-01-R 14-1109-01-L 14-1109-01-S	Right Left Straight	1100	.79	0.79	1 5/8-12	1.50	0.295	N/A	0.233
14-1113-01-R 14-1113-01-L 14-1113-01-S	Right Left Straight	2600	.50 .50	1.16	1 7/8-12	2.00	0.626	N/A	0.726
14-1113-01-R 14-1113-01-L 14-1113-01-S	Right Left Straight	2600	1.16	1.16	1 7/8-12	2.00	0.626	N/A	0.726
Double Acting (D/A) Cylinders, actuated hydraulically both directions.
14-1205-01-R 14-1205-01-L 14-1205-01-S	Right Left Straight	450	.22 .22	0.57	1 1/16-12	1.06	0.098	0.142	0.056
14-1205-01-R 14-1205-01-L 14-1205-01-S	Right Left Straight	450	.57	0.57	1 1/16-12	1.06	0.098	0.142	0.056
14-1209-01-R 14-1209-01-L 14-1209-01-S	Right Left Straight	1100	.31 .31	0.79	1 5/8-12	1.50	0.295	0.475	0.233
14-1209-01-R 14-1209-01-L 14-1209-01-S	Right Left Straight	1100	.79	0.79	1 5/8-12	1.50	0.295	0.475	0.233
14-1213-01-R 14-1213-01-L 14-1213-01-S	Right Left Straight	2600	.50 .50	1.16	1 7/8-12	2.00	0.626	1.423	0.726
14-1213-01-R 14-1213-01-L 14-1213-01-S	Right Left Straight	2600	1.16	1.16	1 7/8-12	2.00	0.626	1.423	0.726

All dimensions are in inches.

WARNING! Never allow swing arm to contact workpiece or fixture during arm rotation.

** Cylinder capacities are listed at 5,000 psi maximum operating pressure, with a standard length VektorFlo^® arm installed. Minimum operating pressure is 750 psi for single acting, 500 psi for double acting.

The clamping force is adjustable by varying the hydraulic system pressure. To determine the approximate output force for your application,system pressure. To determine the approximate output force for your application, divide the cylinder capacity shown above by 5000, and multiply the Resultant Number X Your System Operating Pressure to obtain the approximate clamping force for your application. (Actual force will vary slightly due to internal cantilever loading, frictional loss, and/or return springs.)

*** To allow for piece part height variations, it is recommended that the vertical travel be set at about 50% of the vertical stroke.

**** To insure maximum service life and trouble-free operation, restrict fluid flow to the level indicated in the Clamp Time and Fluid Flow Rate chart

Features

TuffCam™ Cartridge Mount Swing Clamps

Single and Double Acting

Available in three capacities: 450, 1100 and 2600 lb with a standard arm at 5,000 psi
Three cams for accurate arm positioning, smoother rotation and lower per cam surface contact pressure
Patented ball seat for improved rotary function, cam following contact and reduced friction both dynamic and static
Fluorocarbon wipers are standard for improved coolant compatibility
Tungsten-Carbide cam followers for strength and wear
Same mounting envelope as standard VektorFlo^® Cartridge Mount swing clamps
TuffCam™ clocking feature uses standard Vektek arm
Bury deeply in fixtures to reduce overall installed height and simplify design
Arms sold separately
External bottom porting available.
BHC™ (Black Hard Coat) on the cylinder bodies helps prevent scoring and scratching.
Simplified pocket design, with o-ring face seal on top, allows use of some standard port tooling.
Simplified pocket design, with o-ring face seal on top, allows use of some standard port tooling.

U.S. Patent No.
5,820,118
6,886,820 B1

Dimensions

TuffCam™ Cartridge Mount Swing Clamps

Dimensions

Model No.	A	B	C	D	E	F	G	H	J	K
Dimensions
Single Acting (S/A) Cylinders, Actuated Hydraulically 1 Direction, Spring Returned
14-1105-01-X	1 1/6 - 12	4.25	4.00	2.12	0.83	0.63	0.49	0.438	1/4 - 28 x 0.28	0.92
14-1109-01-X	1 5/8 - 12	5.66	5.31	2.68	1.13	0.94	0.65	0.625	3/8 - 24 x 0.47	1.34
14-1113-01-X	1 7/8 - 12	7.32	6.80	3.15	1.49	1.25	0.55	0.875	1/2 - 20 x 0.52	1.72
Double Acting (D/A) Cylinders, Actuated Hydraulically Both Directions
14-1205-01-X	1 1/6 - 12	4.25	4.00	2.12	0.83	0.63	0.49	0.438	1/4 - 28 x 0.28	0.92
14-1209-01-X	1 5/8 - 12	5.66	5.31	2.68	1.13	0.94	0.65	0.625	3/8 - 24 x 0.47	1.34
14-1213-01-X	1 7/8 - 12	7.32	6.80	3.15	1.49	1.25	0.55	0.875	1/2 - 20 x 0.52	1.72

Model No.	Capacity	L	M	N	P	R	S	T	V	W	AC
Single Acting (S/A) Cylinders, Actuated Hydraulically 1 Direction, Spring Returned
14-1105-01-X	450	0.935	0.22	0.57	1.00	1.32	0.13	1.25	N/A	N/A	Breather
14-1109-01-X	1100	1.372	0.31	0.79	1.50	1.50	0.13	1.88	0.02	1.03	Breather
14-1113-01-X	2600	1.747	0.50	1.16	1.63	1.50	0.16	2.13	0.02	1.40	Breather
Double Acting (D/A) Cylinders, Actuated Hydraulically Both Directions
14-1205-01-X	450	0.935	0.22	0.57	1.00	1.32	0.13	1.25	N/A	N/A	SAE 2
14-1209-01-X	1100	1.372	0.31	0.79	1.50	1.50	0.13	1.88	0.02	1.03	SAE 4
14-1213-01-X	2600	1.747	0.50	1.16	1.63	1.50	0.16	2.13	0.02	1.40	SAE 4

*Single Acting Models must be vented, do not install them in blind holes

All dimensions are in inches.

Cavity Dimensions

TuffCam™ Cartridge Mount Swing Clamps

Dimensions

Model No.	CA	CB	CC	CD	CE	CF	CG Min	CG Max	CH	CJ	CK	CL	CM	CN
Cavity Dimensions
Single Acting (S/A) Cylinders, Actuated Hydraulically 1 Direction, Spring Returned
14-1105-01-X	1 1/16 - 12	1.38	1.148	0.979	0.137	0.50	0.750	0.906	1.25	0.938	N/A	N/A	0.750	0.417
14-1109-01-X	1 5/8 - 12	2.00	1.713	1.541	0.139	0.68	0.815	0.906	1.50	1.376	N/A	N/A	0.815	0.525
14-1113-01-X	1 7/8 - 12	2.25	1.962	1.792	0.139	0.62	0.875	0.906	1.50	1.751	N/A	N/A	0.875	0.403
Double Acting (D/A) Cylinders, Actuated Hydraulically Both Directions0.938
14-1205-01-X	1 1/16 - 12	1.38	1.148	0.979	0.137	0.50	0.750	0.906	N/A	0.938	2.75	2.25	0.750	0.417
14-1209-01-X	1 5/8 - 12	2.00	1.713	1.541	0.139	0.68	0.815	0.906	N/A	1.376	3.25	2.75	0.815	0.525
14-1213-01-X	1 7/8 - 12	2.25	1.962	1.792	0.139	0.62	0.875	0.906	N/A	1.751	3.75	3.25	0.875	0.403

NOTE: Basic Cavity can be formed with a standard(SAE J1926/1 Port Detail) O-ring Port Contour Cutter. Flexible honing of cavity is strongly recommended. Flex-Hone™ is a registered trademark of Brush Research Manufacturing Co. Inc., Los Angeles, CA. Please contact Brush Research for additional information. 323-261-2193

SpecificationsFeaturesDimensionsCavity Dimensions

TuffCam™ Cartridge Mount Swing Clamps

Specifications

Swing restrictors available.

Model No.	Swing Direction	Clamp Capacity (lb.)**	Vertical Clamping Stroke (in.)***	Total Stroke (Swing + Vertical)	SAE Body Thread	Standard Arm Length	Effective Piston Area (sq. in.)	Oil Capacity (cu. in.)****
Specifications
Model No.	Swing Direction	Clamp Capacity (lb.)**	Vertical Clamping Stroke (in.)***	Total Stroke (Swing + Vertical)	SAE Body Thread	Standard Arm Length	Retract	Extend	Retract
Single Acting (S/A) Cylinders, actuated hydraulically 1 direction, spring returned.
14-1105-01-R 14-1105-01-L 14-1105-01-S	Right Left Straight	450	.22 .22	0.57	1 1/16-12	1.06	0.098	N/A	0.056
14-1105-01-R 14-1105-01-L 14-1105-01-S	Right Left Straight	450	.57	0.57	1 1/16-12	1.06	0.098	N/A	0.056
14-1109-01-R 14-1109-01-L 14-1109-01-S	Right Left Straight	1100	.31 .31	0.79	1 5/8-12	1.50	0.295	N/A	0.233
14-1109-01-R 14-1109-01-L 14-1109-01-S	Right Left Straight	1100	.79	0.79	1 5/8-12	1.50	0.295	N/A	0.233
14-1113-01-R 14-1113-01-L 14-1113-01-S	Right Left Straight	2600	.50 .50	1.16	1 7/8-12	2.00	0.626	N/A	0.726
14-1113-01-R 14-1113-01-L 14-1113-01-S	Right Left Straight	2600	1.16	1.16	1 7/8-12	2.00	0.626	N/A	0.726
Double Acting (D/A) Cylinders, actuated hydraulically both directions.
14-1205-01-R 14-1205-01-L 14-1205-01-S	Right Left Straight	450	.22 .22	0.57	1 1/16-12	1.06	0.098	0.142	0.056
14-1205-01-R 14-1205-01-L 14-1205-01-S	Right Left Straight	450	.57	0.57	1 1/16-12	1.06	0.098	0.142	0.056
14-1209-01-R 14-1209-01-L 14-1209-01-S	Right Left Straight	1100	.31 .31	0.79	1 5/8-12	1.50	0.295	0.475	0.233
14-1209-01-R 14-1209-01-L 14-1209-01-S	Right Left Straight	1100	.79	0.79	1 5/8-12	1.50	0.295	0.475	0.233
14-1213-01-R 14-1213-01-L 14-1213-01-S	Right Left Straight	2600	.50 .50	1.16	1 7/8-12	2.00	0.626	1.423	0.726
14-1213-01-R 14-1213-01-L 14-1213-01-S	Right Left Straight	2600	1.16	1.16	1 7/8-12	2.00	0.626	1.423	0.726

All dimensions are in inches.

WARNING! Never allow swing arm to contact workpiece or fixture during arm rotation.

*** To allow for piece part height variations, it is recommended that the vertical travel be set at about 50% of the vertical stroke.

**** To insure maximum service life and trouble-free operation, restrict fluid flow to the level indicated in the Clamp Time and Fluid Flow Rate chart

TuffCam™ Cartridge Mount Swing Clamps

Dimensions

Model No.	A	B	C	D	E	F	G	H	J	K
Dimensions
Single Acting (S/A) Cylinders, Actuated Hydraulically 1 Direction, Spring Returned
14-1105-01-X	1 1/6 - 12	4.25	4.00	2.12	0.83	0.63	0.49	0.438	1/4 - 28 x 0.28	0.92
14-1109-01-X	1 5/8 - 12	5.66	5.31	2.68	1.13	0.94	0.65	0.625	3/8 - 24 x 0.47	1.34
14-1113-01-X	1 7/8 - 12	7.32	6.80	3.15	1.49	1.25	0.55	0.875	1/2 - 20 x 0.52	1.72
Double Acting (D/A) Cylinders, Actuated Hydraulically Both Directions
14-1205-01-X	1 1/6 - 12	4.25	4.00	2.12	0.83	0.63	0.49	0.438	1/4 - 28 x 0.28	0.92
14-1209-01-X	1 5/8 - 12	5.66	5.31	2.68	1.13	0.94	0.65	0.625	3/8 - 24 x 0.47	1.34
14-1213-01-X	1 7/8 - 12	7.32	6.80	3.15	1.49	1.25	0.55	0.875	1/2 - 20 x 0.52	1.72

Model No.	Capacity	L	M	N	P	R	S	T	V	W	AC
Single Acting (S/A) Cylinders, Actuated Hydraulically 1 Direction, Spring Returned
14-1105-01-X	450	0.935	0.22	0.57	1.00	1.32	0.13	1.25	N/A	N/A	Breather
14-1109-01-X	1100	1.372	0.31	0.79	1.50	1.50	0.13	1.88	0.02	1.03	Breather
14-1113-01-X	2600	1.747	0.50	1.16	1.63	1.50	0.16	2.13	0.02	1.40	Breather
Double Acting (D/A) Cylinders, Actuated Hydraulically Both Directions
14-1205-01-X	450	0.935	0.22	0.57	1.00	1.32	0.13	1.25	N/A	N/A	SAE 2
14-1209-01-X	1100	1.372	0.31	0.79	1.50	1.50	0.13	1.88	0.02	1.03	SAE 4
14-1213-01-X	2600	1.747	0.50	1.16	1.63	1.50	0.16	2.13	0.02	1.40	SAE 4

*Single Acting Models must be vented, do not install them in blind holes

All dimensions are in inches.

TuffCam™ Cartridge Mount Swing Clamps

Dimensions

Model No.	CA	CB	CC	CD	CE	CF	CG Min	CG Max	CH	CJ	CK	CL	CM	CN
Cavity Dimensions
Single Acting (S/A) Cylinders, Actuated Hydraulically 1 Direction, Spring Returned
14-1105-01-X	1 1/16 - 12	1.38	1.148	0.979	0.137	0.50	0.750	0.906	1.25	0.938	N/A	N/A	0.750	0.417
14-1109-01-X	1 5/8 - 12	2.00	1.713	1.541	0.139	0.68	0.815	0.906	1.50	1.376	N/A	N/A	0.815	0.525
14-1113-01-X	1 7/8 - 12	2.25	1.962	1.792	0.139	0.62	0.875	0.906	1.50	1.751	N/A	N/A	0.875	0.403
Double Acting (D/A) Cylinders, Actuated Hydraulically Both Directions0.938
14-1205-01-X	1 1/16 - 12	1.38	1.148	0.979	0.137	0.50	0.750	0.906	N/A	0.938	2.75	2.25	0.750	0.417
14-1209-01-X	1 5/8 - 12	2.00	1.713	1.541	0.139	0.68	0.815	0.906	N/A	1.376	3.25	2.75	0.815	0.525
14-1213-01-X	1 7/8 - 12	2.25	1.962	1.792	0.139	0.62	0.875	0.906	N/A	1.751	3.75	3.25	0.875	0.403

NOTE: Basic Cavity can be formed with a standard(SAE J1926/1 Port Detail) O-ring Port Contour Cutter. Flexible honing of cavity is strongly recommended. Flex-Hone™ is a registered trademark of Brush Research Manufacturing Co. Inc., Los Angeles, CA. Please contact Brush Research for additional information. 323-261-2193

Call Us:	800-992-0236	Home \| About Us \| Products \| Catalogs \| CAD Library \| Resources \| FAQ/Help \| Careers \| Events \| Contact Us \| Members
+1-	913-365-1045	PO Terms & Conditions © Copyright 1996 - 2024 Vektek LLC