
	Rapid Order View Cart Login Sign Up

Hydraulic

Ultrasonic Position Sensing Clamps
Double Acting Work Supports
- Top Flange
- Position Sensing
  - Top Flange PS
Work Supports
- High Capacity Fluid Advance
- Part Present Sensing
- 20,000 lb. Air & Spring
- Air Advance
- Spring Advance
- Fluid Advance
TuffCam™ Swing Clamps
- Threaded Body
- Top Flange
- Top Flange Long Stroke
- Bottom Flange
- Bottom Flange Long Stroke
- Cartridge
- Rod Position Sensing System
- Magnetic Position Sensing System
- TuffCam Low Profile Top Flange
- TuffCam Low Profile Bottom Flange
- TuffCam Low Profile Rod Position Sensing
- TuffCam Low Profile Magnetic Position Sensing
VersaCam™ Swing Clamps (Standard)
- Threaded
- Long Stroke
- Flow Control
- Top Flange
- Bottom Flange
- Cartridge
Swing Clamp Arms
- Standard Arms
- Rocker Arms
- Low Profile Arms
Link Clamps
- TuffLink ™ 360˚
- High Pressure
- Low Pressure
- Levers
Special Use Clamps
- Centering Clamps
- Part Crowder
- ID Expansion Clamps
- Power Pin Part Crowder
- Pull-Down Clamps
- Edge Clamps
- Retract Clamps
- Collet Vises
  - 5-C Collet Vise
  - Air Collet Vise
Cylinders
- Block Body Pull Cylinder
- Threaded Mini
- Threaded
- Block
- Manifold Block
- Hollow Rod
- Cartridge Mount Mini
- Cartridge Mount Push/Pull Cylinder
- Slip-in Cartridge Pull Cylinders
- Easy Mount Cylinder
Push/Pull Cylinders
- Threaded
- Top Flange
- Bottom Flange
- Cartridge Mount
- Block Pull Cylinder
Fittings
Rotary Unions
- HDX Heavy Duty Rotary Union
- Single Path
- Dual Path
- Quad Path
- 6 Path
- 8 Path
- 12 Path
- Rotary Union Arm
Misc. Plumbing
- Manifolds
- Hoses and Tubing
Power Supplies
- Compact Air/Hydraulic Booster
- Booster with Control Package
- Air/Hydraulic Pump
- 1/3 HP Electric Pump
- 1-HP Advanced Workholding Pump
- 2-HP Advanced Workholding Pump
- 2-HP Low Pressure Advanced Workholding Pump
- Advanced Automation Workholding Pump (HMI)
- Advanced Automation Workholding Pump (Okuma)
- Advanced Workholding Pump Cart
- Screw Pumps
- Compact Air/Hydraulic Pump
- Fixture Test Pump
Pallet Fixture Accessories
- Auto-coupler
- Accumulators
- Automatic Shutoff Valve Decouplers
- Manual Shutoff Valve Decouplers
- Tombstone Top Plates
- Thread-in Coupling Element
- Guardian Pallet Monitoring
- Guardian 2.0
Hardware
- Mounting Hardware
- Swing/Link Clamp Spacers
- End Effectors
- Dura Pin Part Crowder
- Fixture Components
Accessory Valves
- In The Port Sequence Valves
- Air Sensing Control Kit
- Filter Plate
- In-Port Flow Control Valves
- In-Line Flow Control Valve
- Shutoff Valve
- Check Valves
- Filters
- Unclamp Delay Valve
- Sequence Valves
- Sequence/PRV Combination
- Pressure Limiting Valves
- Pressure Reducing Valves
- Low-High Valve
- Alternating Valve
- Pressure Switch
- Over Pressure Relief Cartridge
- Pressure Gauges
- Pneumatic Confirmation Valve
Directional Control Valves
- 2 Position / 3 Port
- 3 Position / 4 Port
- Manual Valve Handle Kit
- Valve Subplates
Zero-Point Systems
- Hydraulic Modules
- Hydraulic Modules, Automation
- Hydraulic Modules, Center Lock
- Pneumatic Modules
- Pneumatic Modules, Single Acting
- Pneumatic Modules, Automation
- Pull-studs
- Engagement Screws
Concepts / Applications
VektorFlo® Catálogo Español
Safety

You have 0 item(s)
in your cart.
View Cart

Hydraulic

High Capacity Fluid Advance

Home > Products > Hydraulic > Work Supports > High Capacity Fluid Advance
High Capacity Fluid Advance (PDF 1019.00 KB)

Specifications

Plungers stay retracted during part loading. Hydraulic pressure advances the plunger exerting only spring force as it makes contact with the part. Hydraulic pressure then automatically sequences, "freezing" the plunger, to properly support the part.
 Available in 1,000, 2000, 4000 and 8,000 lb. capacity.
 Order with base or cartridge only.
 Ventless configuration and built in wipers protect
the plunger movement from chips and debris.
 Four bolt base is compatible with Vektek in port
flow control and in port sequence valves.
 Uses Vektek’s BHC technology to guard against corrosion.
 O-ring face seal design makes machining cavities easier.

Standard SAE porting and alternate o-ring manifold face seal is located in the base of the support for bolt down installation. The base can be removed for direct cartridge mounting.

Model No.	Support Capacity (lbs)*	Mounting Style***	Contact Force (lbs)	Stroke (in.)	Base Dimensions (in.)	Retracted Height (in.)	Working Oil Capacity (cu. in.)**	Port X Depth for Optional In-Port Valves****
Specifications
10-0704-10	1000	Cartridge	0.5-4	0.25	N/A	1.63	0.03	N/A
10-0804-20	1000	SAE/Manifold	0.5-4	0.25	1 X 1 X 1	2.25	0.03	SAE 4 X 0.58
10-0706-10	2000	Cartridge	1-6	0.25	N/A	2.14	0.05	N/A
10-0806-20		SAE/Manifold		0.25	1.19 X 1.31 X 1.31	2.79	0.05	SAE 4 X 0.58
10-0706-16		Cartridge		0.50	N/A	2.64	0.07	N/A
10-0806-26		SAE/Manifold		0.50	1.19 X 1.31 X 1.31	3.29	0.07	SAE 4 X 0.58
10-0708-10	4000	Cartridge	3-10	0.25	N/A	2.85	0.20	N/A
10-0808-20		SAE/Manifold		0.25	1.50 X 1.63 X 1.63	3.50	0.20	SAE 4 X 0.58
10-0708-16		Cartridge		0.50	N/A	3.35	0.23	N/A
10-0808-26		SAE/Manifold		0.50	1.50 X 1.63 X 1.63	4.00	0.23	SAE 4 X 0.58
10-0710-10	8000	Cartridge	4-13	0.625	N/A	4.00	0.57	N/A
10-0810-20	8000	SAE/Manifold	4-13	0.625	1.63 X 2.13 X 2.13	4.63	0.57	SAE 4 X 0.75

NOTE: The maximum system back-pressure a fluid advance work support can overcome is 10 psi. Returning back-pressure greater than 10 psi may cause slow or failed retraction.

* Support capacities are listed at 5,000 psi maximum pressure. Support capacities for other pressures are shown in the fluid advance High Capacity and Part Present Sensing load capacity chart.

** Restrict flow rate to a maximum of 130 cu. in./minute.

*** For cartridge mount models, see cavity dimensions.

**** In-Port Valves require the use of manifold mount ports.

Dimensions

For proper sealing, mating surface must be flat within 0.003 in with a maximum 63 μ in. Ra surface finish.

Model No.	A	B	C	D	E	F	G	H	J	K	L	M
Dimensions
10-0804-20	3/4-16	2.25	0.25	0.95	1.00	0.21	0.69	0.38	0.11	1.00	1.00	0.75
10-0806-20	1-16	2.79	0.25	1.19	1.19	0.21	0.88	0.56	0.14	1.31	1.31	1.00
10-0806-26	1-16	3.29	0.50	1.65	1.19	0.21	0.88	0.56	0.14	1.31	1.31	1.00
10-0808-20	1 1/4-16	3.51	0.25	1.44	1.50	0.36	1.13	0.75	0.19	1.63	1.63	1.25
10-0808-26	1 1/4-16	4.01	0.50	1.83	1.50	0.36	1.13	0.75	0.19	1.63	1.63	1.25
10-0810-20	1 3/4-16	4.63	0.63	2.22	1.63	0.40	1.50	1.00	0.31	2.13	2.13	1.69

Model No.	N	P	Q	R	S	T	V	W	X	Y	AA	AB
10-0804-20	0.38	0.75	0.38	0.14	0.25	0.81	0.28	1/4-20 X .14	SAE 4	0.38	0.23	0.06
10-0806-20	0.50	1.00	0.50	0.19	0.30	0.94	0.50	5/16-18 X .20	SAE 4	0.38	0.31	0.16
10-0806-26	0.50	1.00	0.50	0.19	0.30	0.94	0.50	3/8 - 24 x .20	SAE 4	0.38	0.31	0.16
10-0808-20	0.63	1.25	0.63	0.22	0.38	1.19	0.63	7/16-14 X .25	SAE 4	0.38	0.34	0.31
10-0808-26	0.63	1.25	0.63	0.22	0.38	1.19	0.63	7/16-14 X .25	SAE 4	0.38	0.34	0.31
10-0810-20	0.84	1.69	0.84	0.28	0.44	1.25	0.81	5/8-11 X .31	SAE 4	0.38	0.31	0.56

Cartridge Mount

Fluid Advance High Capacity Cartridge Cavity Check List

Confirm capacity of item selected.
Note the sealing surface finish requirements.
Minimum depth specification represents the nominal depth of the standard Vektek base dimension.
Confirm cavity drawing is appropriate for the model number used.
Note specified thread depth when cutting threads.
When using a bottoming tap tool, modifications may be required.
When hand tapping threads, perpendicularity is essential.

Model No.	A	B	C	D	E	F	G	H	J	M	V	W
Dimensions
10-0704-10	3/4-16	1.63	0.25	1.32	0.13	0.21	0.69	0.38	0.11	0.68	0.28	1/4-20 X .14
10-0706-10	1-16	2.14	0.25	1.72	0.24	0.21	0.88	0.56	0.14	0.92	0.50	5/16-18 x .20
10-0706-16	1-16	2.64	0.50	2.18	0.24	0.21	0.88	0.56	0.14	0.92	0.50	3/8-24 x .20
10-0708-10	1 1/4-16	2.85	0.25	2.29	0.33	0.36	1.13	0.75	0.19	1.17	0.63	7/16-14 X .25
10-0708-16	1 1/4-16	3.35	0.50	2.67	0.33	0.36	1.13	0.75	0.19	1.17	0.63	7/16-14 X .25
10-0710-10	1 3/4-16	4.00	0.63	3.22	0.33	0.40	1.50	1.00	0.31	1.67	0.81	5/8-11 X .31

Direct Replacement

NEW!

Replace older models with higher capacity cartridges or complete with bases!

Normally retracted plungers do not interfere with part loading. Advance them with hydraulic pressure, exerting only spring force to bring the plunger into contact with your part. Hydraulic pressure then automatically sequences, “freezing” the plunger properly against the part.

Available in 2000 or 4000 lb. capacity.
Order with base or cartridge only.
Ventless configuration and built in wipers protect the plunger movement from chips and debris.
Up to 3.5X capacity of competitor’s version.
Uses Vektek’s BHC technology to guard against corrosion.
O-Ring face seal design makes machining cavities easier.

Standard SAE porting and alternate O-Ring manifold face seal is located in the base of the support for bolt down installation. The base can be removed for direct cartridge mounting.

Model No.	Direct Replacement for Older Model	Support Capacity (lbs)*	Mounting Style***	Contact Force (lbs)	Stroke (in.)	Base Dimensions (in.)	Retracted Height (in.)	Oil Capacity** (cu. in.)
Specifications
10-0706-10	10-0706-04	2000	Cartridge	1-6	0.25	N/A	2.14	0.05
10-0806-10	10-0806-05		SAE/Manifold		0.25	0.90 X 1.31 X 1.75	2.51	0.05
10-0706-16	10-0706-14		Cartridge		0.50	N/A	2.64	0.07
10-0806-16	10-0806-15		SAE/Manifold		0.50	0.90 X 1.31 X 1.75	3.01	0.07
10-0708-10	10-0708-07	4000	Cartridge	3-10	0.25	N/A	2.85	0.12
10-0808-10	10-0808-07		SAE/Manifold		0.25	1.25 X 1.50 X 2.31	3.25	0.12
10-0708-16	10-0708-17		Cartridge		0.50	N/A	3.35	0.15
10-0808-16	10-0808-17		SAE/Manifold		0.50	1.25 X 1.50 X 2.31	3.75	0.15

NOTE: The maximum system back-pressure a fluid advance work support can overcome is 10 psi. Returning back-pressure greater than 10 psi may cause slow or failed retraction.

* Support capacities are listed at 5,000 psi maximum operating pressure.
Support capacities for other pressures must be determined by consulting the capacity chart.

** Restrict flow rate to a maximum of 130 cu. in./minute.

*** For cartridge mount models, see cavity dimensions.

**** For complete dimensions, see Fluid Advance Work Supports - section (B) in the Precision Hydraulic Clamping Inch catalog.

For proper sealing, mating surface must be flat within 0.003 in with a maximum 63 μ in. Ra surface finish.

Model No.	A	B	C	D	E	F	G	H	J	K	L	M	N	P
Dimensions
10-0806-10	1-16	2.51	.25	1.19	.90	.21	.88	.56	.14	1.31	.66	.90	.45	1.75
10-0806-16	1-16	3.01	.50	1.65	.90	.21	.88	.56	.14	1.31	.66	.90	.45	1.75
10-0808-10	1 1/4-16	3.25	.25	1.44	1.25	.36	1.13	.75	.19	1.50	.75	1.06	.53	2.31
10-0808-16	1 1/4-16	3.75	.50	1.83	1.25	.36	1.13	.75	.19	1.50	.75	1.06	.53	2.31

Model No.	Q	R	S	T	V	W	X	Y	Z	AA	AB	AC	AD	AE
10-0806-10	.69	1.20	.51	.22	.50	5/16-18 x .20	SAE2	.33	.38	7	.38	.69	YES	N.A.
10-0806-16	.69	1.20	.51	.22	.50	3/8-24 x .20	SAE2	.33	.38	7	.38	.69	YES	N.A.
10-0808-10	.94	1.66	.72	.28	.63	7/16-14 x .25	SAE4	.43	.38	N.A.	N.A.	N.A.	N.A.	YES
10-0808-16	.94	1.66	.72	.28	.63	7/16-14 x .25	SAE4	.43	.38	N.A.	N.A.	N.A.	N.A.	YES

Cavity

Cavity Dimensions

Dimensions
Model No.	A	B	C	D	E	F	G Inner O-Ring Seal	H Outer Seal	Installation Torque Inner O-Ring Seal	Installation Torque Outer Seal
Cartridge Mount, High Capacity Fluid Advance Work Support
10-0704-10	3/4-16	0.105	0.689	0.38	0.77	0.125	0.078	N/A	20 ft-lb	N/A
10-0706-10	1-16	0.170	0.939	0.53	1.03	0.188	0.125	0.250	35 ft-lb	10 ft-lb
10-0706-16
10-0708-10	1 1/4-16	0.260	1.189	0.85	1.28	0.188	0.187	0.380	50 ft-lb	40 ft-lb
10-0708-16
10-0710-10	1 3/4-16	0.290	1.689	1.00	1.78	0.250	0.297	N/A	100 ft-lb	N/A

* Inner O-Ring and optional Outer Seal are both supplied with the assembly.

Use Inner O-Ring or Outer Seal but not both.

The Inner O-Ring is the preferred option.

Contact Bolt

Self-produced Contact Bolt

Model No.	Capacity (lb)	O-Ring Part No.	O-Ring Size	A	B	C	D	E
Self-Produced Contact Bolt
Fluid Advance Supports, hydraulic pressure lifts spring which lifts plunger, hydraulic pressure locks.
10-0804-20	1,000	39-0511-72	0.185 X 0.039	0.297	0.141	0.187	0.040	1/4 - 20 UNC-2A
10-0806-20	2000	39-0510-59	0.236 X 0.059	0.384	0.197	0.238	0.047	5/16 - 18 UNC-2A
10-0806-26	2000	39-0000-69	0.301X 0.064	0.450	0.197	0.302	0.047	3/8 - 24 UNF-2A
10-0808-20	4000	55-2500-05	0.301 X 0.070	0.493	0.250	0.328	0.070	7/16 - 14 UNC-2A
10-0808-26	4000	55-2500-05	0.301 X 0.070	0.493	0.250	0.328	0.070	7/16 - 14 UNC-2A
10-0810-20	8000	39-0511-76	0.472 X 0.079	0.681	0.313	0.508	0.080	5/8 - 11 UNC-2A

SpecificationsDimensionsCartridge MountDirect Replacement CavityContact Bolt

Standard SAE porting and alternate o-ring manifold face seal is located in the base of the support for bolt down installation. The base can be removed for direct cartridge mounting.

Model No.	Support Capacity (lbs)*	Mounting Style***	Contact Force (lbs)	Stroke (in.)	Base Dimensions (in.)	Retracted Height (in.)	Working Oil Capacity (cu. in.)**	Port X Depth for Optional In-Port Valves****
Specifications
10-0704-10	1000	Cartridge	0.5-4	0.25	N/A	1.63	0.03	N/A
10-0804-20	1000	SAE/Manifold	0.5-4	0.25	1 X 1 X 1	2.25	0.03	SAE 4 X 0.58
10-0706-10	2000	Cartridge	1-6	0.25	N/A	2.14	0.05	N/A
10-0806-20		SAE/Manifold		0.25	1.19 X 1.31 X 1.31	2.79	0.05	SAE 4 X 0.58
10-0706-16		Cartridge		0.50	N/A	2.64	0.07	N/A
10-0806-26		SAE/Manifold		0.50	1.19 X 1.31 X 1.31	3.29	0.07	SAE 4 X 0.58
10-0708-10	4000	Cartridge	3-10	0.25	N/A	2.85	0.20	N/A
10-0808-20		SAE/Manifold		0.25	1.50 X 1.63 X 1.63	3.50	0.20	SAE 4 X 0.58
10-0708-16		Cartridge		0.50	N/A	3.35	0.23	N/A
10-0808-26		SAE/Manifold		0.50	1.50 X 1.63 X 1.63	4.00	0.23	SAE 4 X 0.58
10-0710-10	8000	Cartridge	4-13	0.625	N/A	4.00	0.57	N/A
10-0810-20	8000	SAE/Manifold	4-13	0.625	1.63 X 2.13 X 2.13	4.63	0.57	SAE 4 X 0.75

NOTE: The maximum system back-pressure a fluid advance work support can overcome is 10 psi. Returning back-pressure greater than 10 psi may cause slow or failed retraction.

*** For cartridge mount models, see cavity dimensions.

**** In-Port Valves require the use of manifold mount ports.

For proper sealing, mating surface must be flat within 0.003 in with a maximum 63 μ in. Ra surface finish.

Model No.	A	B	C	D	E	F	G	H	J	K	L	M
Dimensions
10-0804-20	3/4-16	2.25	0.25	0.95	1.00	0.21	0.69	0.38	0.11	1.00	1.00	0.75
10-0806-20	1-16	2.79	0.25	1.19	1.19	0.21	0.88	0.56	0.14	1.31	1.31	1.00
10-0806-26	1-16	3.29	0.50	1.65	1.19	0.21	0.88	0.56	0.14	1.31	1.31	1.00
10-0808-20	1 1/4-16	3.51	0.25	1.44	1.50	0.36	1.13	0.75	0.19	1.63	1.63	1.25
10-0808-26	1 1/4-16	4.01	0.50	1.83	1.50	0.36	1.13	0.75	0.19	1.63	1.63	1.25
10-0810-20	1 3/4-16	4.63	0.63	2.22	1.63	0.40	1.50	1.00	0.31	2.13	2.13	1.69

Model No.	N	P	Q	R	S	T	V	W	X	Y	AA	AB
10-0804-20	0.38	0.75	0.38	0.14	0.25	0.81	0.28	1/4-20 X .14	SAE 4	0.38	0.23	0.06
10-0806-20	0.50	1.00	0.50	0.19	0.30	0.94	0.50	5/16-18 X .20	SAE 4	0.38	0.31	0.16
10-0806-26	0.50	1.00	0.50	0.19	0.30	0.94	0.50	3/8 - 24 x .20	SAE 4	0.38	0.31	0.16
10-0808-20	0.63	1.25	0.63	0.22	0.38	1.19	0.63	7/16-14 X .25	SAE 4	0.38	0.34	0.31
10-0808-26	0.63	1.25	0.63	0.22	0.38	1.19	0.63	7/16-14 X .25	SAE 4	0.38	0.34	0.31
10-0810-20	0.84	1.69	0.84	0.28	0.44	1.25	0.81	5/8-11 X .31	SAE 4	0.38	0.31	0.56

Fluid Advance High Capacity Cartridge Cavity Check List

Confirm capacity of item selected.
Note the sealing surface finish requirements.
Minimum depth specification represents the nominal depth of the standard Vektek base dimension.
Confirm cavity drawing is appropriate for the model number used.
Note specified thread depth when cutting threads.
When using a bottoming tap tool, modifications may be required.
When hand tapping threads, perpendicularity is essential.

Model No.	A	B	C	D	E	F	G	H	J	M	V	W
Dimensions
10-0704-10	3/4-16	1.63	0.25	1.32	0.13	0.21	0.69	0.38	0.11	0.68	0.28	1/4-20 X .14
10-0706-10	1-16	2.14	0.25	1.72	0.24	0.21	0.88	0.56	0.14	0.92	0.50	5/16-18 x .20
10-0706-16	1-16	2.64	0.50	2.18	0.24	0.21	0.88	0.56	0.14	0.92	0.50	3/8-24 x .20
10-0708-10	1 1/4-16	2.85	0.25	2.29	0.33	0.36	1.13	0.75	0.19	1.17	0.63	7/16-14 X .25
10-0708-16	1 1/4-16	3.35	0.50	2.67	0.33	0.36	1.13	0.75	0.19	1.17	0.63	7/16-14 X .25
10-0710-10	1 3/4-16	4.00	0.63	3.22	0.33	0.40	1.50	1.00	0.31	1.67	0.81	5/8-11 X .31

NEW!

Replace older models with higher capacity cartridges or complete with bases!

Available in 2000 or 4000 lb. capacity.
Order with base or cartridge only.
Ventless configuration and built in wipers protect the plunger movement from chips and debris.
Up to 3.5X capacity of competitor’s version.
Uses Vektek’s BHC technology to guard against corrosion.
O-Ring face seal design makes machining cavities easier.

Standard SAE porting and alternate O-Ring manifold face seal is located in the base of the support for bolt down installation. The base can be removed for direct cartridge mounting.

Model No.	Direct Replacement for Older Model	Support Capacity (lbs)*	Mounting Style***	Contact Force (lbs)	Stroke (in.)	Base Dimensions (in.)	Retracted Height (in.)	Oil Capacity** (cu. in.)
Specifications
10-0706-10	10-0706-04	2000	Cartridge	1-6	0.25	N/A	2.14	0.05
10-0806-10	10-0806-05		SAE/Manifold		0.25	0.90 X 1.31 X 1.75	2.51	0.05
10-0706-16	10-0706-14		Cartridge		0.50	N/A	2.64	0.07
10-0806-16	10-0806-15		SAE/Manifold		0.50	0.90 X 1.31 X 1.75	3.01	0.07
10-0708-10	10-0708-07	4000	Cartridge	3-10	0.25	N/A	2.85	0.12
10-0808-10	10-0808-07		SAE/Manifold		0.25	1.25 X 1.50 X 2.31	3.25	0.12
10-0708-16	10-0708-17		Cartridge		0.50	N/A	3.35	0.15
10-0808-16	10-0808-17		SAE/Manifold		0.50	1.25 X 1.50 X 2.31	3.75	0.15

NOTE: The maximum system back-pressure a fluid advance work support can overcome is 10 psi. Returning back-pressure greater than 10 psi may cause slow or failed retraction.

*** For cartridge mount models, see cavity dimensions.

**** For complete dimensions, see Fluid Advance Work Supports - section (B) in the Precision Hydraulic Clamping Inch catalog.

For proper sealing, mating surface must be flat within 0.003 in with a maximum 63 μ in. Ra surface finish.

Model No.	A	B	C	D	E	F	G	H	J	K	L	M	N	P
Dimensions
10-0806-10	1-16	2.51	.25	1.19	.90	.21	.88	.56	.14	1.31	.66	.90	.45	1.75
10-0806-16	1-16	3.01	.50	1.65	.90	.21	.88	.56	.14	1.31	.66	.90	.45	1.75
10-0808-10	1 1/4-16	3.25	.25	1.44	1.25	.36	1.13	.75	.19	1.50	.75	1.06	.53	2.31
10-0808-16	1 1/4-16	3.75	.50	1.83	1.25	.36	1.13	.75	.19	1.50	.75	1.06	.53	2.31

Model No.	Q	R	S	T	V	W	X	Y	Z	AA	AB	AC	AD	AE
10-0806-10	.69	1.20	.51	.22	.50	5/16-18 x .20	SAE2	.33	.38	7	.38	.69	YES	N.A.
10-0806-16	.69	1.20	.51	.22	.50	3/8-24 x .20	SAE2	.33	.38	7	.38	.69	YES	N.A.
10-0808-10	.94	1.66	.72	.28	.63	7/16-14 x .25	SAE4	.43	.38	N.A.	N.A.	N.A.	N.A.	YES
10-0808-16	.94	1.66	.72	.28	.63	7/16-14 x .25	SAE4	.43	.38	N.A.	N.A.	N.A.	N.A.	YES

Cavity Dimensions

Dimensions
Model No.	A	B	C	D	E	F	G Inner O-Ring Seal	H Outer Seal	Installation Torque Inner O-Ring Seal	Installation Torque Outer Seal
Cartridge Mount, High Capacity Fluid Advance Work Support
10-0704-10	3/4-16	0.105	0.689	0.38	0.77	0.125	0.078	N/A	20 ft-lb	N/A
10-0706-10	1-16	0.170	0.939	0.53	1.03	0.188	0.125	0.250	35 ft-lb	10 ft-lb
10-0706-16
10-0708-10	1 1/4-16	0.260	1.189	0.85	1.28	0.188	0.187	0.380	50 ft-lb	40 ft-lb
10-0708-16
10-0710-10	1 3/4-16	0.290	1.689	1.00	1.78	0.250	0.297	N/A	100 ft-lb	N/A

* Inner O-Ring and optional Outer Seal are both supplied with the assembly.

Use Inner O-Ring or Outer Seal but not both.

The Inner O-Ring is the preferred option.

Self-produced Contact Bolt

Model No.	Capacity (lb)	O-Ring Part No.	O-Ring Size	A	B	C	D	E
Self-Produced Contact Bolt
Fluid Advance Supports, hydraulic pressure lifts spring which lifts plunger, hydraulic pressure locks.
10-0804-20	1,000	39-0511-72	0.185 X 0.039	0.297	0.141	0.187	0.040	1/4 - 20 UNC-2A
10-0806-20	2000	39-0510-59	0.236 X 0.059	0.384	0.197	0.238	0.047	5/16 - 18 UNC-2A
10-0806-26	2000	39-0000-69	0.301X 0.064	0.450	0.197	0.302	0.047	3/8 - 24 UNF-2A
10-0808-20	4000	55-2500-05	0.301 X 0.070	0.493	0.250	0.328	0.070	7/16 - 14 UNC-2A
10-0808-26	4000	55-2500-05	0.301 X 0.070	0.493	0.250	0.328	0.070	7/16 - 14 UNC-2A
10-0810-20	8000	39-0511-76	0.472 X 0.079	0.681	0.313	0.508	0.080	5/8 - 11 UNC-2A

Call Us:	800-992-0236	Home \| About Us \| Products \| Catalogs \| CAD Library \| Resources \| FAQ/Help \| Careers \| Events \| Contact Us \| Members
+1-	913-365-1045	PO Terms & Conditions © Copyright 1996 - 2024 Vektek LLC