Hydraulic

Dual Path Rotating Union

Dimensions

For proper sealing, mating surface must be flat within 0.003 in. with a maximum 32 µin Ra surface finish.

Operating Parameter Guidelines
- Max Temperature: 40-160F°
- Max RPM see table here
-Air may be run in any available passage
-Rotating unions are not intended to be a structural member. It is recommended that the anti-rotate arm should be fully supported by external framework. Load on the union should be minimized. Please contact Vektek for technical assistance.
-Installation Instructions Available, Request IS3207

* G ports for Models 32-2242-02. and 32-2262-02. are plugged at assembly. For manifold mounting order two each adapter 30-8711-23 and discard plugs. Model numbers ending in -03 are not manifold mountable.

All dimensions are in inches.

Dual Path Rotating Union

Rotational Torque