Hydraulic

Booster With Control Packages

Standard Features Multiplies your shop air line pressure to power simplehydraulic systems without electricity. Intensification ratios ranging from 11:1 to 54:1. Output capacities from 2.4 to 11.1 cu. inches. Complete package includes everything you need to use a VektorFlo® booster, including hardware. Includes filter/regulator with automatic drain, gauge, check valve, control valve, mufflers and all of the fittings and tubing, ready to hook up! (Customer supplies air quick connector) Available in manual, 115 VAC (6.8 W) or 24 VDC (6.0 W) models Includes air inlet check valve to prevent loss of clamping force in the event of an air line break			Pump Manual

Specifications

Pump Manual

Specifications Model No. Ratio Booster Configuration Air over Hydraulic Pressure Intensifiers 55-0184-00 1:11 No Control Valve 55-0284-16 1:11 Manual Control Valve 55-0284-17 1:11 115 VAC Control Valve 55-0284-18 1:11 24 VDC Control Valve 55-0284-19 1:11 Pneumatic Pilot Valve 55-0104-00 1:22 No Control Valve 55-0204-16 1:22 Manual Control Valve 55-0204-17 1:22 115 VAC Control Valve 55-0204-18 1:22 24 VDC Control Valve 55-0204-19 1:22 Pneumatic Pilot Valve 55-0114-02 1:40 No Control Valve 55-0214-16 1:40 Manual Control Valve 55-0214-17 1:40 115 VAC Control Valve 55-0214-18 1:40 24 VDC Control Valve 55-0214-19 1:40 Pneumatic Pilot Valve 55-0114-04 1:54 No Control Valve 55-0224-16 1:54 Manual Control Valve 55-0224-17 1:54 115 VAC Control Valve 55-0224-18 1:54 24 VDC Control Valve 55-0224-19 1:54 Pneumatic Pilot Valve

NOTE: One booster can be used to operate one single acting system. Boosters are not intended for use with single acting palletized (disconnected) systems. Boosters may be mounted horizontally or vertically. If mounted vertically, the oil discharge end must point up for proper operation.

Dimensions

			Pump Manual
Booster with Manual Controls
Booster with Solenoid Controls