
	Rapid Order View Cart Login Sign Up

Hydraulic

Ultrasonic Position Sensing Clamps
Double Acting Work Supports
- Top Flange
- Position Sensing
  - Top Flange PS
Work Supports
- High Capacity Fluid Advance
- Part Present Sensing
- 20,000 lb. Air & Spring
- Air Advance
- Spring Advance
- Fluid Advance
TuffCam™ Swing Clamps
- Threaded Body
- Top Flange
- Top Flange Long Stroke
- Bottom Flange
- Bottom Flange Long Stroke
- Cartridge
- Rod Position Sensing System
- Magnetic Position Sensing System
- TuffCam Low Profile Top Flange
- TuffCam Low Profile Bottom Flange
- TuffCam Low Profile Rod Position Sensing
- TuffCam Low Profile Magnetic Position Sensing
VersaCam™ Swing Clamps (Standard)
- Threaded
- Long Stroke
- Flow Control
- Top Flange
- Bottom Flange
- Cartridge
Swing Clamp Arms
- Standard Arms
- Rocker Arms
- Low Profile Arms
Link Clamps
- TuffLink ™ 360˚
- High Pressure
- Low Pressure
- Levers
Special Use Clamps
- Centering Clamps
- Part Crowder
- ID Expansion Clamps
- Power Pin Part Crowder
- Pull-Down Clamps
- Edge Clamps
- Retract Clamps
- Collet Vises
  - 5-C Collet Vise
  - Air Collet Vise
Cylinders
- Block Body Pull Cylinder
- Threaded Mini
- Threaded
- Block
- Manifold Block
- Hollow Rod
- Cartridge Mount Mini
- Cartridge Mount Push/Pull Cylinder
- Slip-in Cartridge Pull Cylinders
- Easy Mount Cylinder
Push/Pull Cylinders
- Threaded
- Top Flange
- Bottom Flange
- Cartridge Mount
- Block Pull Cylinder
Fittings
Rotary Unions
- HDX Heavy Duty Rotary Union
- Single Path
- Dual Path
- Quad Path
- 6 Path
- 8 Path
- 12 Path
- Rotary Union Arm
Misc. Plumbing
- Manifolds
- Hoses and Tubing
Power Supplies
- Compact Air/Hydraulic Booster
- Booster with Control Package
- Air/Hydraulic Pump
- 1/3 HP Electric Pump
- 1-HP Advanced Workholding Pump
- 2-HP Advanced Workholding Pump
- 2-HP Low Pressure Advanced Workholding Pump
- Advanced Automation Workholding Pump (HMI)
- Advanced Automation Workholding Pump (Okuma)
- Advanced Workholding Pump Cart
- Screw Pumps
- Compact Air/Hydraulic Pump
- Fixture Test Pump
Pallet Fixture Accessories
- Auto-coupler
- Accumulators
- Automatic Shutoff Valve Decouplers
- Manual Shutoff Valve Decouplers
- Tombstone Top Plates
- Thread-in Coupling Element
- Guardian Pallet Monitoring
- Guardian 2.0
Hardware
- Mounting Hardware
- Swing/Link Clamp Spacers
- End Effectors
- Dura Pin Part Crowder
- Fixture Components
Accessory Valves
- In The Port Sequence Valves
- Air Sensing Control Kit
- Filter Plate
- In-Port Flow Control Valves
- In-Line Flow Control Valve
- Shutoff Valve
- Check Valves
- Filters
- Unclamp Delay Valve
- Sequence Valves
- Sequence/PRV Combination
- Pressure Limiting Valves
- Pressure Reducing Valves
- Low-High Valve
- Alternating Valve
- Pressure Switch
- Over Pressure Relief Cartridge
- Pressure Gauges
- Pneumatic Confirmation Valve
Directional Control Valves
- 2 Position / 3 Port
- 3 Position / 4 Port
- Manual Valve Handle Kit
- Valve Subplates
Zero-Point Systems
- Hydraulic Modules
- Hydraulic Modules, Automation
- Hydraulic Modules, Center Lock
- Pneumatic Modules
- Pneumatic Modules, Single Acting
- Pneumatic Modules, Automation
- Pull-studs
- Engagement Screws
Concepts / Applications
VektorFlo® Catálogo Español
Safety

You have 0 item(s)
in your cart.
View Cart

Hydraulic

Part Present Sensing

Home > Products > Hydraulic > Work Supports > Part Present Sensing
Part Present Sensing (PDF 4.00 MB)

Specifications

NEW! Confirm part is present and contacted even on as-cast surfaces!

Plungers stay retracted during part loading while air flow travels through the work support. Hydraulic pressure advances the plunger exerting only spring force as it makes contact with the part. This closes the integral air valve to indicate part is present and contacted. Hydraulic pressure then automatically sequences, freezing the plunger.

Available in 2,000, 4,000 and 8,000 lb. capacity.
Order with four bolt base or cartridge only.
Once support is locked, air sensing positively confirms both contact and part present.
Use Vektek’s Air Sensing Control Kit 50-8240-00 for easy setup.
Four bolt base is compatible with Vektek In-Port flow control and In-Port sequence valves.
Uses Vektek’s BHC technology to guard against corrosion.
O-Ring face seal design makes machining cavities easier.
Max air operating pressure is 15 PSI.

Standard SAE porting and alternate o-ring manifold face seal is located in the base of the support for bolt down installation. The base can be removed for direct cartridge mounting.

Model No.	Support Capacity (lbs)*	Mounting Style***	Contact Force (lbs)	Stroke (in.)	Base Dimensions (in.)	Retracted Height (in.)	Oil Capacity (cu. in.)**	Port X Depth for Optional In-Port Valves****
Specifications
10-0706-10-PS	2000	Cartridge	1-6	0.25	N/A	2.28	0.05	N/A
10-0806-20-PS		SAE/Manifold		0.25	1.19 X 1.31 X 1.31	2.93	0.05	SAE 4 X 0.58
10-0706-16-PS		Cartridge		0.50	N/A	2.78	0.07	N/A
10-0806-26-PS		SAE/Manifold		0.50	1.19 X 1.31 X 1.31	3.43	0.07	SAE 4 X 0.58
10-0708-10-PS	4000	Cartridge	3-10	0.25	N/A	3.04	0.20	N/A
10-0808-20-PS		SAE/Manifold		0.25	1.50 X 1.63 X 1.63	3.69	0.20	SAE 4 X 0.58
10-0708-16-PS		Cartridge		0.50	N/A	3.54	0.23	N/A
10-0808-26-PS		SAE/Manifold		0.50	1.50 X 1.63 X 1.63	4.19	0.23	SAE 4 X 0.58
10-0710-10-PS	8000	Cartridge	4-13	0.63	N/A	4.28	0.57	N/A
10-0810-20-PS	8000	SAE/Manifold	4-13	0.63	1.63 X 2.13 X 2.13	4.91	0.57	SAE 4 X 0.750

NOTE: The maximum system back-pressure a fluid advance work support can overcome is 10 psi. Returning back-pressure greater than 10 psi may cause slow or failed retraction.

* Support capacities are listed at 5,000 psi maximum pressure. Support capacities for other pressures are shown in the fluid advance High Capacity and Part Present Sensing load capacity chart.

** Restrict flow rate to a maximum of 130 cu. in./minute.

*** For cartridge mount models, see cavity dimensions.

**** In-Port valves require the use of manifold mount ports.

Dimensions

Model No.	A	B	C	D	E	F	G	H	J	K	L	M	N	P	Q
Dimensions
10-0806-20-PS	1-16	2.93	0.25	1.19	1.19	0.21	0.88	0.56	0.28	1.31	1.31	1.00	0.50	1.00	0.50
10-0806-26-PS	1-16	3.43	0.50	1.65	1.19	0.21	0.88	0.56	0.28	1.31	1.31	1.00	0.50	1.00	0.50
10-0808-20-PS	1 1/4-16	3.69	0.25	1.44	1.50	0.36	1.13	0.75	0.38	1.63	1.63	1.25	0.63	1.25	0.63
10-0808-26-PS	1 1/4-16	4.19	0.50	1.83	1.50	0.36	1.13	0.75	0.38	1.63	1.63	1.25	0.63	1.25	0.63
10-0810-20-PS	1 3/4-16	4.91	0.63	2.22	1.63	0.40	1.50	1.00	0.59	2.13	2.13	1.69	0.84	1.69	0.84

Model No.	R	S	T	V	W	X	Y	AA	AB	AC	AD	AE	AF	AG
10-0806-20-PS	0.19	0.30	0.94	0.43	5/16-18 X .20 3/8-24 X .20	SAE 4	0.38	0.31	0.16	0.14	0.36	1/8 NPT	0.16	0.38
10-0806-26-PS	0.19	0.30	0.94	0.43	5/16-18 X .20 3/8-24 X .20			0.31	0.16	0.14	0.36		0.16	0.38
10-0808-20-PS	0.22	0.38	1.19	0.62	7/16-14 X .25			0.34	0.31	0.31	0.36		0.25	0.41
10-0808-26-PS	0.22	0.38	1.19	0.62	7/16-14 X .25			0.34	0.31	0.31	0.36		0.25	0.41
10-0810-20-PS	0.28	0.44	1.25	0.81	5/8-11 X .31			0.31	0.56	0.63	0.19		0.19	0.41

For proper sealing, mating surface must be flat within 0.003 in with a maximum 63 μ in. Ra surface finish.

Air Circuit

Recommended Air Circuit

Cartridge Mount

Cartridge Mount Work Support Check List

Confirm capacity of item selected.
Note the sealing surface finish requirements.
Minimum depth specification represents the nominal depth of the standard Vektek base dimension.
Confirm cavity drawing is appropriate for the model number used.
Note specified thread depth when cutting threads.
When using a bottoming tap tool, modifications may be required.
When hand tapping threads, perpendicularity is essential.

Model No.	A	B	C	D	E	F	G	H	J	M	V	W
Dimensions
10-0706-10-PS	1-16	2.28	0.25	1.72	0.24	0.21	0.88	0.56	0.28	0.92	0.43	5/16-18 X .20 3/8-24 X .20
10-0706-16-PS	1-16	2.78	0.50	2.18	0.24	0.21	0.88	0.56	0.28	0.92	0.43	5/16-18 X .20 3/8-24 X .20
10-0708-10-PS	1 1/4-16	3.04	0.25	2.29	0.33	0.36	1.13	0.75	0.38	1.17	0.62	7/16-14 X .25
10-0708-16-PS	1 1/4-16	3.54	0.50	2.67	0.33	0.36	1.13	0.75	0.38	1.17	0.62	7/16-14 X .25
10-0710-10-PS	1 3/4-16	4.28	0.63	3.22	0.33	0.40	1.50	1.00	0.59	1.67	0.81	5/8-11 X .31

For proper sealing,mating surface must be flat within 0.003 in with a maximum 63 µ in. Ra surface finish.

Cavity

Cavity Dimensions

Model No.	A	B	C	D	E	F	G	H	J	Installation Torque
Dimensions
10-0706-10-PS	1-16	0.34	0.939	0.53	1.03	0.188	0.125	0.078	0.383	35 ft-lb
10-0706-16-PS	1-16	0.34	0.939	0.53	1.03	0.188	0.125	0.078	0.383	35 ft-lb
10-0708-10-PS	1 1/4-16	0.56	1.189	0.85	1.28	0.188	0.187	0.125	0.476	50 ft-lb
10-0708-16-PS	1 1/4-16	0.56	1.189	0.85	1.28	0.188	0.187	0.125	0.476	50 ft-lb
10-0710-10-PS	1 3/4-16	0.69	1.689	1.00	1.78	0.250	0.297	0.188	0.688	100 ft-lb

Contact Bolt

Self Produced Part Present Sensing Contact Bolt

Model No.	Retaining Ring No.	Adapter No.	O-Ring Part No.	Max Weight (lbs)	B	C	D	E	F	G	H	J	K	L
Self Produced Part Present Sensing Contact Bolt
10-0706-10-PS	23-0100-07	81-0606-01	39-0510-59 (0.236 x 0.059)	.25	.402	.125	.025	.020	.002	.1060	.0015	.0015	.010	.405
10-0806-20-PS		81-0606-01	39-0510-59 (0.236 x 0.059)
10-0706-16-PS		81-0606-03	39-0000-69 (0.301 x 0.064)
10-0806-26-PS		81-0606-03	39-0000-69 (0.301 x 0.064)
10-0708-10-PS	23-0100-08	81-0608-01	55-2500-05 (0.301 x 0.070)	.27	.502	.156	.025	.020	.002	.1350	.0015	.0015	.015	.600
10-0808-20-PS
10-0708-16-PS
10-0808-26-PS
10-0710-10-PS	23-0100-06	81-0610-01	39-0511-76 (0.472 x 0.079)	.45	.720	.250	.030	.029	.003	.220	.002	.002	.020	.685
10-0810-20-PS	23-0100-06	81-0610-01

SpecificationsDimensionsAir CircuitCartridge MountCavityContact Bolt