
	Rapid Order View Cart Login Sign Up

Hydraulic

Ultrasonic Position Sensing Clamps
Double Acting Work Supports
- Top Flange
- Position Sensing
  - Top Flange PS
Work Supports
- High Capacity Fluid Advance
- Part Present Sensing
- 20,000 lb. Air & Spring
- Air Advance
- Spring Advance
- Fluid Advance
TuffCam™ Swing Clamps
- Threaded Body
- Top Flange
- Top Flange Long Stroke
- Bottom Flange
- Bottom Flange Long Stroke
- Cartridge
- Rod Position Sensing System
- Magnetic Position Sensing System
- TuffCam Low Profile Top Flange
- TuffCam Low Profile Bottom Flange
- TuffCam Low Profile Rod Position Sensing
- TuffCam Low Profile Magnetic Position Sensing
VersaCam™ Swing Clamps (Standard)
- Threaded
- Long Stroke
- Flow Control
- Top Flange
- Bottom Flange
- Cartridge
Swing Clamp Arms
- Standard Arms
- Rocker Arms
- Low Profile Arms
Link Clamps
- TuffLink ™ 360˚
- High Pressure
- Low Pressure
- Levers
Special Use Clamps
- Centering Clamps
- Part Crowder
- ID Expansion Clamps
- Power Pin Part Crowder
- Pull-Down Clamps
- Edge Clamps
- Retract Clamps
- Collet Vises
  - 5-C Collet Vise
  - Air Collet Vise
Cylinders
- Block Body Pull Cylinder
- Threaded Mini
- Threaded
- Block
- Manifold Block
- Hollow Rod
- Cartridge Mount Mini
- Cartridge Mount Push/Pull Cylinder
- Slip-in Cartridge Pull Cylinders
- Easy Mount Cylinder
Push/Pull Cylinders
- Threaded
- Top Flange
- Bottom Flange
- Cartridge Mount
- Block Pull Cylinder
Fittings
Rotary Unions
- HDX Heavy Duty Rotary Union
- Single Path
- Dual Path
- Quad Path
- 6 Path
- 8 Path
- 12 Path
- Rotary Union Arm
Misc. Plumbing
- Manifolds
- Hoses and Tubing
Power Supplies
- Compact Air/Hydraulic Booster
- Booster with Control Package
- Air/Hydraulic Pump
- 1/3 HP Electric Pump
- 1-HP Advanced Workholding Pump
- 2-HP Advanced Workholding Pump
- 2-HP Low Pressure Advanced Workholding Pump
- Advanced Automation Workholding Pump (HMI)
- Advanced Automation Workholding Pump (Okuma)
- Advanced Workholding Pump Cart
- Screw Pumps
- Compact Air/Hydraulic Pump
- Fixture Test Pump
Pallet Fixture Accessories
- Auto-coupler
- Accumulators
- Automatic Shutoff Valve Decouplers
- Manual Shutoff Valve Decouplers
- Tombstone Top Plates
- Thread-in Coupling Element
- Guardian Pallet Monitoring
- Guardian 2.0
Hardware
- Mounting Hardware
- Swing/Link Clamp Spacers
- End Effectors
- Dura Pin Part Crowder
- Fixture Components
Accessory Valves
- In The Port Sequence Valves
- Air Sensing Control Kit
- Filter Plate
- In-Port Flow Control Valves
- In-Line Flow Control Valve
- Shutoff Valve
- Check Valves
- Filters
- Unclamp Delay Valve
- Sequence Valves
- Sequence/PRV Combination
- Pressure Limiting Valves
- Pressure Reducing Valves
- Low-High Valve
- Alternating Valve
- Pressure Switch
- Over Pressure Relief Cartridge
- Pressure Gauges
- Pneumatic Confirmation Valve
Directional Control Valves
- 2 Position / 3 Port
- 3 Position / 4 Port
- Manual Valve Handle Kit
- Valve Subplates
Zero-Point Systems
- Hydraulic Modules
- Hydraulic Modules, Automation
- Hydraulic Modules, Center Lock
- Pneumatic Modules
- Pneumatic Modules, Single Acting
- Pneumatic Modules, Automation
- Pull-studs
- Engagement Screws
Concepts / Applications
VektorFlo® Catálogo Español
Safety

You have 0 item(s)
in your cart.
View Cart

Hydraulic

Hoses and Tubing

Home > Products > Hydraulic > Misc. Plumbing > Hoses and Tubing
Hoses and Tubing (PDF 514.00 KB)

Features

Hoses and Tubing

Hoses

All VektorFlo^® hoses are intended to be operate at 5,000 psi working pressure
End fittings have the largest possible orifice to reduce restrictions and allow devices to
work better
Large hoses are typically used to feed entire fixtures, medium size hoses are for feeding small fixtures or single devices
Small hoses are to be used to feed single devices ONLY and are to be connected directly back to a manifold unless used on double acting clamps

NOTE: Use of standard rubber hoses and end fittings can hamper the action of many devices due to excessive end fitting restrictions. If you choose to purchase hoses from another supplier, be sure that hose diameters and end fittings are not causing excessive restrictions.

Hoses

Part No.	Minimum Bend Radius (in.)	Hose ID	Hose OD	Fitting A	Fitting B	F
Specifications
35-1112-08	0.79	0.14	0.29	7/16-20 Female JIC 37° Swivel	7/16-20 Female JIC 37° Swivel	8 in.
35-1112-12						12 in.
35-1112-18						18 in.
35-1112-24						24 in.
35-1112-30						30 in.
35-1112-42						42 in.
35-1133-02	1.50	0.19	0.43	7/16-20 Male Straight Thread SAE 4 O-Ring Boss	7/16-20 Female JIC 37° Swivel	24 in.
35-1133-03						36 in.
35-1133-05						60 in.
35-1446-03	2.50	0.38	0.67	9/16-18 Male Straight Thread SAE 6 O-Ring Boss	9/16-18 Male Straight Thread SAE 6 O-Ring Boss	36 in.
35-1446-05						60 in.
35-1446-10						120 in.

All dimensions are in inches.

Hose Mounting Clips

Model No.	Hose OD	A	B	C	D
Specifications
35-2001-00	.29	.48	.36	.80	.13
35-2003-00	.43	.74	.57	1.10	.16
35-2006-00	.67	1.04	.80	1.61	.22

All dimensions are in inches.

Steel Tubing

Steel Hydraulic Tubing

Available in 5 Foot Sections

Model No.	Outside Diameter	Wall	Suggested Centerline Bend Radius
Steel Tubing
35-0002-05	0.250	0.049	0.56
35-0003-05	0.375	0.065	0.94

FeaturesHosesHose Mounting ClipsSteel Tubing

Hoses and Tubing

Hoses

All VektorFlo^® hoses are intended to be operate at 5,000 psi working pressure
End fittings have the largest possible orifice to reduce restrictions and allow devices to
work better
Large hoses are typically used to feed entire fixtures, medium size hoses are for feeding small fixtures or single devices
Small hoses are to be used to feed single devices ONLY and are to be connected directly back to a manifold unless used on double acting clamps

Hoses

Part No.	Minimum Bend Radius (in.)	Hose ID	Hose OD	Fitting A	Fitting B	F
Specifications
35-1112-08	0.79	0.14	0.29	7/16-20 Female JIC 37° Swivel	7/16-20 Female JIC 37° Swivel	8 in.
35-1112-12						12 in.
35-1112-18						18 in.
35-1112-24						24 in.
35-1112-30						30 in.
35-1112-42						42 in.
35-1133-02	1.50	0.19	0.43	7/16-20 Male Straight Thread SAE 4 O-Ring Boss	7/16-20 Female JIC 37° Swivel	24 in.
35-1133-03						36 in.
35-1133-05						60 in.
35-1446-03	2.50	0.38	0.67	9/16-18 Male Straight Thread SAE 6 O-Ring Boss	9/16-18 Male Straight Thread SAE 6 O-Ring Boss	36 in.
35-1446-05						60 in.
35-1446-10						120 in.

All dimensions are in inches.

Call Us:	800-992-0236	Home \| About Us \| Products \| Catalogs \| CAD Library \| Resources \| FAQ/Help \| Careers \| Events \| Contact Us \| Members
+1-	913-365-1045	PO Terms & Conditions © Copyright 1996 - 2024 Vektek LLC