Specifications
Port X Depth for Optional In-Port Valves*****
** Clamp capacities are listed at 5000 psi maximum operating pressure with a standard length link clamp lever installed. Minimum operating pressure is 750 psi for single acting and 500 psi for double acting devices. The clamping force is adjustable by varying the hydraulic system pressure. To determine the approximate output force for your application, divide the clamp capacity shown above by 5,000 and multiply the resultant number by your system operating pressure to obtain the approximate clamping force for your application. (Actual force will vary slightly due to mechanical inefficiencies and friction.)
*** To insure maximum service life and trouble-free operation , restrict fluid flow to the above flow ratings when clamping. If you are unable to measure flow rates, the devices should be positioned in no less than ½ second. These recommendations apply when using the standard lever. When using the optional long lever or your custom lever, please restrict the flow rates to position the lever in no less than 1 second.
**** Equal ± 3° with standard lever
***** In-Port Valves require the use of manifold mount ports.
Order levers separately
Single and Double Acting
Optional In-Port Flow Control is a meter-in device with reverse free flow check valve.
Optional In-Port Sequence valve is a sequencing device with reverse free flow check valve.
Dimensions
3.22
Levers are to be adjusted to within ± 3° of nominal clamp angle to prevent premature failure.
All dimensions are in inches.
Mounting Dimensions
Spacers
NOTE: Customer will be required to cut spacer to the appropriate length, drill mounting and oil feed holes and machine the inside diameter (C) to the correct size for the applicable clamp.
NOTE: Material is extruded aluminum.