Hydraulic

Powered LED Display Electronic Pressure Switch

• Large 4 digit LED pressure display
• Requires power (15-35 VDC), not functional unpowered.
• Programmable hysteresis or window function, NO or NC.
• Easy 3-Button programmable electronic pressure switch.
• 2 digital or I/O-Link switching outputs, PNP or NPN.
• Single analog output, 0-10 V or 4-20 mA.
• Set pressure range of 0-5800 psi.
• Programmable set and reset pressure for each output.
• Environmental protection rating of IP67.

• Switch tested over 1,000,000 cycle lifetime.
• New sealed collar and micro-switch design guard against leaks; making this switch
  ideal for use in wet environments.
• M8 connectors afford more standard wiring options.
• Superior reinforced cable connections that withstand stress, seal securely and are easily changed or serviced.
• Pressure adjustment 750 to 5000 psi.
• Reset deadband:
  approximately 5% of the set pressure.
• Sealed switch for operation in high moisture environments.(Complies with IP 67or Nema Rating 6)
• Electrical Rating
  • 1 amp @ 28 VDC resistive
  • 5 amp @ 125/250 VAC

NOTE: To assist in setting pressure on mechanical Pressure Switches, order battery operated Pressure Setter/ Checker, Model No. 33-0110-15.

• Electronic Pressure Switch Kits ready to mount under valve kits.
• Available in A Port, B Port, and A-B Port.
• 0-5800 psi operating range.
• Configuralbe parameters for the following:
  • Digital, Analog, or IO-Link Outputs
  • PNP or NPN Digital Switching Outputs
  • 0-10 V or 4-20 mA Analog Output
  • Hysteresis or Window Function
  • Normally Open or Normally Closed Function
  • Units in BAR, mBAR, MPA, KPA, PSI, KGcm
• Flip Display 180
• Rotate hood for best viewing