Hydraulic Zero-Point Clamping Modules for Automation
Hydraulic Automation
Design:
Centric blow-out, support control and opening control.
Application:
Zero-point clamping system for automation solutions for set up-time-optimized clamping during cutting and non-cutting machining.
- Hydraulic opening.
- Pneumatic blow-out.
- Opening operating pressure: min. 60 bar – max. 70 bar.
- Cover and piston hardened.
- Repetition accuracy < 0.005 mm.
- With opening control (pneum.) and support control (pneum.).
Note:
Opening control: Dynamic pressure with opened clamping module, flow-through with locked clamping module. Support control via the blow-out function: Dynamic pressure with supported interchangeable pallet. The installation clamping module is opened hydraulically (1) and mechanically locked through spring force. Subsequent uncoupling of the pressure lines is possible at any time (module is clamped pressure-free).
The clamping module has four connections:
1 = hydr. opening
3 = pneum. Blow-out and support control
4 = pneum. Opening control inlet
5 = pneum. Opening control outlet