Valve Type: 24VDC 3-Position 4-Port P-Blocked Center with A and B Individual Circuit Pressure Adjustment
1HP Advanced Workholding Pallet Decoupler (two hose) S/A or D/A
- Reduces pressure to clamp or unclamp side of a circuit.
- Use with one or two handed Auto-Shutoff Decoupler.
- P-Blocked center valve drops pressure in both lines. Allows decoupling and re-coupling of the hoses.
- Operator interface is remote pendant or wired into a machine controller
- This configuration can also be used to operate two individual single acting systems at different pressures.
Extremely low carbon footprint — Motor never runs while holding pressure
- Fully configurable 0-4 valve stack to meet all workholding needs.
- Manual or Solenoid operated valves available in all configurations.
- Custom designed pendant for Solenoid Operated Valves.
- Optional machine control cable for connection to CNC machine.
- Vektek electronic pressure switch with analog output to VFD for PI loop control.
- Return line filter with visual clog indicator is standard on all pumps.
- 5″ Oil level site glass, drain plug, and isolation foot pads.
- Large filler / breather for easy oil changes and filling.
- In-tank fluid level sensor, electronically connected to fault circuit.
- 10 Micron, return line filter for maximum protection and long life.
- Visual or optional electronic filter clog indicator.
- Vertical pump lift handle for use with crane or fork lift.
- Horizontal lift handles for manual lifter and protection.
- Reusable BUN-N rubber gaskets with PSA backing throughout.
- High efficiency, HI/LO 2-stage flow, 6 piston pump design.
- Premium efficiency. VFD rated, TEFC, AC Motor, 1-HP, 3-PH, 230/460 VAC, 50/60-HZ, 1800 RPM.
- Variable frequency drive (VFD) motor control system, configured for electrical inputs worldwide.
- VFD internally protected from short circuit on all models.
- No duty cycle limitations due to VFD thermal protection.
- Large 5 gallon reservoir designed for maximum usable oil volume.
- 5 screen/filter components for maximum protection of pump and devices.
- Working pressure range of 1500-5000 PSI.
Pump Add-on Options
- Valve Wiring Cable (one for each valve).
- Pump/Machine Tool Interface Cable (all pump control in one cable).
- Upgrade to fluid level temperature switch.
- Upgrade to Electronic clog indicator return line filter.
- Mechanical pressure switch (no power required).
- Electronic pressure switch (24V power required).
- Manual or solenoid directional control valve functions.
- Check Valve (for multiple manual valves in stack).
- Pressure reducing valves for each circuit.
- Accumulator (for small or low pressure systems).
- Extra pendant switches (1 supplied with each different solenoid valve on pump for setup and testing).
- Return Line Water Absorbing Filter with models available for use without cart and with cart.
Valve Wiring Cable, M12, 5 pin (add one cable per valve)
- Allows for a single valve to be wired and controlled from the machine.
- Plugs in place of a pendant but doesn’t provide pump sensor feedback.
- Cost effective and simple to integrate solution for machine control of each valve.
Pump/Machine Tool Interface Cable, 24 pin or 36 pin, Single Connection (*Contact your sales representative for details.)
- Allow up to 1-4 or 5-6 valves to be controlled from machine.
- Each valve can use a clamp and unclamp pressure switch.
- Provides pump sensor feedback for diagnosis of fault.
- Emergency stop input can be used to stop pump from machine.
- Fully integrated to pump control, requires connection to customer machine.
| Model No. | Valve Type | Electrical Voltage | No Of Valves |
|---|---|---|---|
| 55-9545-28-1 | 24 VDC 3 Position 4 Port P-Blocked Center with A & B Individual Circuit Pressure Adjustment | 100 - 120 VAC 1 Phase | 1 |
| 55-9575-28-1 | 24 VDC 3 Position 4 Port P-Blocked Center with A & B Individual Circuit Pressure Adjustment | 200 - 240 VAC 3 Phase | 1 |
| 55-9595-28-1 | 24 VDC 3 Position 4 Port P-Blocked Center with A & B Individual Circuit Pressure Adjustment | 380 - 500 VAC 3 Phase | 1 |
| Model No. | Pump Flow - Stage 1 | Pump Flow - Stage 2 | Pressure Range - Stage 1 | Pressure Range - Stage 2 | Reservoir Capacity | Viscosity (cSt) |
|---|---|---|---|---|---|---|
| 55-9545-28-1 | 350 cu. in. | 51 cu. in. | 0 - 700 psi | 700 - 5000 psi | Gross - 5.0 gal / Useable - 3.5 gal | 22 - 46 @ 40° C |
| 55-9575-28-1 | 350 cu. in. | 51 cu. in. | 0 - 700 psi | 700 - 5000 psi | Gross - 5.0 gal / Useable - 3.5 gal | 22 - 46 @ 40° C |
| 55-9595-28-1 | 350 cu. in. | 51 cu. in. | 0 - 700 psi | 700 - 5000 psi | Gross - 5.0 gal / Useable - 3.5 gal | 22 - 46 @ 40° C |
| Model No. | Description |
|---|---|
| 95-5954-50 | CABLE, VALVE WIRING,1 VLV, M12, 5 PIN, 16.4 FT |
| Model No. | Description |
|---|---|
| 27-7422-03 | CABLE,M12 MALE,M12 FEMALE,5 POLE,16.4 FT |
| 27-9422-02 | CABLE,M12 MALE,M12 FEMALE,5 POLE, 32.8 FT |
| 95-5955-37 | PENDANT SWITCH, 2/3 VALVE, 6 FT, NORMALLY OPEN, (ON/OFF) |
| 95-5955-38 | PENDANT SWITCH, 2/3 VALVE, 6 FT, NORMALLY CLOSED, (OFF/ON) |
| 95-5955-39 | PENDANT SWITCH, 2/3 VALVE, 6 FT, NORMALLY CLOSED, (OFF/MOMENTARY ON) |
| 95-5955-40 | PENDANT SWITCH, 3/4 VALVE, 6 FT, CLOSED CENTER OR P-BLOCK CENTER, (ON/OFF/ON) |
| Model No. | Description |
|---|---|
| 31-0500-18 | FILTER, CARTRIDGE, AWP, 10 MICRON |
| 31-0500-26 | FILTER, SPIN-ON, 10 µm, WATER ABS |
| 62-5595-07 | FILTER, WATER ABSORBING, 10 µm |
| 62-5595-08 | FILTER, WATER ABSORBING, 10 µm, CART |
You have questions? WE HAVE ANSWERS!
Use the contact button below to be connected with one of our team of experts.