Language: EN

Valve Type: 24VDC 2-Position 3-Port Normally Open

1HP Advanced Workholding Pump Single Acting Continuous Connection – S/A Live System
  • Recommended to run a continuously connected or single hose supply decoupled system where the pressurized time exceeds the unpressurized time.
  • Operator interface is by remote pendant or can be wired into a machine controller.

NOTE: Should not be used with palletized systems as the valve is energized to unclamp. The unclamped time will be excessive, causing the valve to run hot.

1HP Advanced Workholding Pump Single Acting Continuous Connection – S/A Live System
Extremely low carbon footprint — Motor never runs while holding pressure
  • Fully configurable 0-4 valve stack to meet all workholding needs.
  • Manual or Solenoid operated valves available in all configurations.
  • Custom designed pendant for Solenoid Operated Valves.
  • Optional machine control cable for connection to CNC machine.
  • Vektek electronic pressure switch with analog output to VFD for PI loop control.
  • Return line filter with visual clog indicator is standard on all pumps.
  • 5″ Oil level site glass, drain plug, and isolation foot pads.
  • Large filler / breather for easy oil changes and filling.
  • In-tank fluid level sensor, electronically connected to fault circuit.
  • 10 Micron, return line filter for maximum protection and long life.
  • Visual or optional electronic filter clog indicator.
  • Vertical pump lift handle for use with crane or fork lift.
  • Horizontal lift handles for manual lifter and protection.
  • Reusable BUN-N rubber gaskets with PSA backing throughout.
  • High efficiency, HI/LO 2-stage flow, 6 piston pump design.
  • Premium efficiency. VFD rated, TEFC, AC Motor, 1-HP, 3-PH, 230/460 VAC, 50/60-HZ, 1800 RPM.
  • Variable frequency drive (VFD) motor control system, configured for electrical inputs worldwide.
  • VFD internally protected from short circuit on all models.
  • No duty cycle limitations due to VFD thermal protection.
  • Large 5 gallon reservoir designed for maximum usable oil volume.
  • 5 screen/filter components for maximum protection of pump and devices.
  • Working pressure range of 1500-5000 PSI.
Pump Add-on Options
  • Valve Wiring Cable (one for each valve).
  • Pump/Machine Tool Interface Cable (all pump control in one cable).
  • Upgrade to fluid level temperature switch.
  • Upgrade to Electronic clog indicator return line filter.
  • Mechanical pressure switch (no power required).
  • Electronic pressure switch (24V power required).
  • Manual or solenoid directional control valve functions.
  • Check Valve (for multiple manual valves in stack).
  • Pressure reducing valves for each circuit.
  • Accumulator (for small or low pressure systems).
  • Extra pendant switches (1 supplied with each different solenoid valve on pump for setup and testing).
  • Return Line Water Absorbing Filter with models available for use without cart and with cart.
Exploded View of AWP
Valve Wiring Cable, M12, 5 pin (add one cable per valve)
  • Allows for a single valve to be wired and controlled from the machine.
  • Plugs in place of a pendant but doesn’t provide pump sensor feedback.
  • Cost effective and simple to integrate solution for machine control of each valve.
Pump/Machine Tool Interface Cable, 24 pin or 36 pin, Single Connection (*Contact your sales representative for details.)
  • Allow up to 1-4 or 5-6 valves to be controlled from machine.
  • Each valve can use a clamp and unclamp pressure switch.
  • Provides pump sensor feedback for diagnosis of fault.
  • Emergency stop input can be used to stop pump from machine.
  • Fully integrated to pump control, requires connection to customer machine.
Model No.Valve TypeElectrical VoltageNo Of Valves
55-9545-23-124 VDC 2 Position 3 Port Normally Open100 - 120 VAC 1 Phase1
55-9545-23-224 VDC 2 Position 3 Port Normally Open100 - 120 VAC 1 Phase2
55-9545-23-424 VDC 2 Position 3 Port Normally Open100 - 120 VAC 1 Phase4
Model No.Valve TypeElectrical VoltageNo Of Valves
55-9575-23-124 VDC 2 Position 3 Port Normally Open200 - 240 VAC 3 Phase1
55-9575-23-224 VDC 2 Position 3 Port Normally Open200 - 240 VAC 3 Phase2
55-9575-23-424 VDC 2 Position 3 Port Normally Open200 - 240 VAC 3 Phase4
Model No.Valve TypeElectrical VoltageNo Of Valves
55-9595-23-124 VDC 2 Position 3 Port Normally Open380 - 500 VAC 3 Phase1
55-9595-23-224 VDC 2 Position 3 Port Normally Open380 - 500 VAC 3 Phase2
55-9595-23-424 VDC 2 Position 3 Port Normally Open380 - 500 VAC 3 Phase4
Model No.Pump Flow - Stage 1Pump Flow - Stage 2Pressure Range - Stage 1Pressure Range - Stage 2Reservoir CapacityViscosity (cSt)
55-9545-23-1350 cu. in.51 cu. in.0 - 700 psi750 - 5000 psiGross - 5.0 gal / Useable - 3.5 gal22 - 46 @ 40° C
55-9545-23-2350 cu. in.51 cu. in.0 - 700 psi700 - 5000 psiGross - 5.0 gal / Useable - 3.5 gal22 - 46 @ 40° C
55-9545-23-4350 cu. in.51 cu. in.0 - 700 psi700 - 5000 psiGross - 5.0 gal / Useable - 3.5 gal22 - 46 @ 40° C
Model No.Pump Flow - Stage 1Pump Flow - Stage 2Pressure Range - Stage 1Pressure Range - Stage 2Reservoir CapacityViscosity (cSt)
55-9575-23-1350 cu. in.51 cu. in.0 - 700 psi700 - 5000 psiGross - 5.0 gal / Useable - 3.5 gal22 - 46 @ 40° C
55-9575-23-2350 cu. in.51 cu. in.0 - 700 psi700 - 5000 psiGross - 5.0 gal / Useable - 3.5 gal22 - 46 @ 40° C
55-9575-23-4350 cu. in.51 cu. in.0 - 700 psi700 - 5000 psiGross - 5.0 gal / Useable - 3.5 gal22 - 46 @ 40° C
Model No.Pump Flow - Stage 1Pump Flow - Stage 2Pressure Range - Stage 1Pressure Range - Stage 2Reservoir CapacityViscosity (cSt)
55-9595-23-1350 cu. in.51 cu. in.0 - 700 psi700 - 5000 psiGross - 5.0 gal / Useable - 3.5 gal22 - 46 @ 40° C
55-9595-23-2350 cu. in.51 cu. in.0 - 700 psi700 - 5000 psiGross - 5.0 gal / Useable - 3.5 gal22 - 46 @ 40° C
55-9595-23-4350 cu. in.51 cu. in.0 - 700 psi700 - 5000 psiGross - 5.0 gal / Useable - 3.5 gal22 - 46 @ 40° C
Model No.Description
95-5954-50CABLE, VALVE WIRING,1 VLV, M12, 5 PIN, 16.4 FT
Model No.Description
27-7422-03CABLE,M12 MALE,M12 FEMALE,5 POLE,16.4 FT
27-9422-02CABLE,M12 MALE,M12 FEMALE,5 POLE, 32.8 FT
95-5955-37PENDANT SWITCH, 2/3 VALVE, 6 FT, NORMALLY OPEN, (ON/OFF)
95-5955-38PENDANT SWITCH, 2/3 VALVE, 6 FT, NORMALLY CLOSED, (OFF/ON)
95-5955-39PENDANT SWITCH, 2/3 VALVE, 6 FT, NORMALLY CLOSED, (OFF/MOMENTARY ON)
95-5955-40PENDANT SWITCH, 3/4 VALVE, 6 FT, CLOSED CENTER OR P-BLOCK CENTER, (ON/OFF/ON)
Model No.Description
31-0500-18FILTER, CARTRIDGE, AWP, 10 MICRON
31-0500-26FILTER, SPIN-ON, 10 µm, WATER ABS
62-5595-07FILTER, WATER ABSORBING, 10 µm
62-5595-08FILTER, WATER ABSORBING, 10 µm, CART

You have questions? WE HAVE ANSWERS!

Use the contact button below to be connected with one of our team of experts.