Vektek: Products


	Rapid Order View Cart Login Sign Up

You have 0 item(s)
in your cart.
View Cart

Air Advance

Home > Products
Air Advance (PDF 899.00 KB)

Specifications

Air Advance Work Supports

Specifications

Model No.	Support Capacity* (lb.)	Mounting Style***	Hydraulic Connection	Contact Force (lb.)**	Stroke (in.)	Base Dimensions (in.)	Retracted Height (in.)	Oil Capacity (cu.in.)
Specifications
Air Advance Supports, air pressure lifts plunger, spring retracts, hydraulic pressure locks.
10-0606-10	1000	Cartridge	Cavity	4	.25	N/A	1.62	.05
10-0606-11		Base	SAE Ports			.85 x 1.25 x 1.75	1.93	.12
10-0606-12		Base	Manifold			.90 x 1.31 x 1.75	1.99	.13
10-0609-06	2500	Cartridge	Cavity	8	.38	N/A	2.06	.08
10-0609-07		Base	SAE Ports			.91 x 1.50 x 2.31	2.40	.13
10-0609-08		Base	Manifold			.91 x 1.50 x 2.31	2.40	.10
10-0615-06	7500	Base	SAE Ports	20	.50	1.00 x 2.50 x 3.00	3.87	.81
10-0620-07	12500	Base	SAE Ports	57	.75	1.25 x 3.50 x 3.81	4.50	1.79
10-0629-10	20000	Base	SAE Ports	116	1.00	1.99 x 4.75 x 4.88	6.15	3.37

* Support capacities are listed at 5,000 psi maximum operating pressure.
Support capacities for other pressures must be determined by consulting the capacity chart.

** Maximum air pressure for advancing the plunger is 25 psi.
Order air regulator - 0-25 psi to more precisely control plunger advance force.

*** For cartridge mount models, see cavity dimensions.

Features

Air Advance Work Supports

For Supporting Fragile Parts or Use In Harsh Environments

Available in four capacities from 1,000 to 12,500 lb., adapt to support fragile parts, heavy parts or "hog out" applications.
For harsh environments (where contaminants such as aluminum or cast iron fines, corrosive or tacky coolants are present) we suggest running a constant "air spring" to keep the plunger extended and the problem contaminants out.
Normally retracted plungers provide additional clearance for part loading. Advance them with air pressure, exerting ONLY the force needed to "kiss" the part, then "freeze" the plunger in place hydraulically.
Heavier attachments may be used with air advance supports because of their additional air powered lifting/contact force. Stainless steel plunger and sleeve assemblies help guard against corrosion in most machining environments.

Standard SAE porting and alternate o-ring manifold face seal is located in the base of the support for bolt down installation, The base can be removed for direct cartridge mounting.
Stainless steel plunger and sleeve assemblies help guard against corrosion in most machining environments.
Special large diameter plungers and sleeves provide greater rigidity.

Continuous flow of air, can serve as an "air spring" and be left connected during machining. This "air spring" effect helps keep harsh contaminants from getting between the plunger and sleeve. This is an excellent support choice when using double acting cylinders. You should observe air bubbles escaping around the plunger when used in this manner.

Dimensions

Air Advance Work Supports

Dimensions

For proper sealing, mating surface must be< flat within 0.003 with a maximum
63 µin R_a surface finish.

Model No.	A	B	C	D	E	F	G	H	J	K	L	M	N
Dimensions
Air Advance Supports, air pressure lifts plunger, spring retracts, hydraulic pressure locks.
10-0606-11	1 - 16	1.93	0.25	1.06	0.85	0.21	0.87	0.63	5/16-18 x 0.29	1.25	0.63	0.90	0.45
10-0606-12	1 - 16	1.99	0.25	1.06	0.90	0.21	0.87	0.63	5/16-18 x 0.29	1.31	0.66	0.90	0.45
10-0609-07	1 5/16-16	2.40	0.38	1.39	0.91	0.25	1.13	0.81	3/8-16 x 0.24	1.50	0.75	1.06	0.53
10-0609-08	1 5/16-16	2.40	0.38	1.39	0.91	0.25	1.13	0.81	3/8-16 x 0.24	1.50	0.75	1.06	0.53
10-0615-06	2 1/4-16	3.87	.50	2.67	1.00	0.50	1.99	1.50	1/2-13 x 0.63	2.50	1.25	2.06	1.03
10-0620-07	3 - 16	4.49	.76	3.00	1.24	0.53	2.74	2.00	5/8-11 x 0.63	3.50	1.75	2.87	1.44
10-0629-10	4 1/4-16	6.15	1.00	3.97	1.99	0.80	N/A	2.85	3/4-16 x 0.87	4.75	2.38	4.00	2.00

Model No.	Q	R	S	T	V	W	X	Y	Z	AA	AB	AC	AD	AE	AF	AG
Air Advance Supports, air pressure lifts plunger, spring retracts, hydraulic pressure locks.
10-0606-11	0.69	1.20	0.51	0.22	SAE 2	0.33	SAE 2	0.33	0.37	7	N/A	N/A	N/A	N/A	N/A	0.92
10-0606-12	0.69	1.20	0.51	0.22	SAE 2	0.33	N/A	N/A	0.37	7	0.38	0.69	N/A	N/A	N/A	0.92
10-0609-07	0.94	1.66	0.72	0.28	SAE 4	0.43	SAE 4	0.43	0.38	7	N/A	N/A	N/A	N/A	N/A	1.22
10-0609-08	0.94	1.66	0.72	0.28	SAE 4	0.43	N.A	N/A	0.38	7	0.43	0.88	N/A	N/A	N/A	1.22
10-0615-06	1.25	2.41	1.03	0.28	SAE 4	0.63	SAE 4	0.63	0.38	N/A	N/A	N/A	1.13	0.16	N/A	2.16
10-0620-07	1.75	3.22	1.44	0.34	SAE 4	0.94	SAE 4	0.94	0.38	N/A	N/A	N/A	1.63	0.16	N/A	2.91
10-0629-10	2.38	4.00	2.00	0.41	SAE 4	1.25	SAE 4	1.25	0.37	N/A	N/A	N/A	0.39	4.16	0.39	4.16

*All dimensions are in inches.

*Wrench flats on plunger available upon request. Contact Vektek Sales Department for model numbers, dimensional information and availability.

Capacity Charts

Air Advance Work Supports

Capacity Charts

Cartridge

Cartridge Dimensions

Model Number	A	B	C	D	E	F	G	H	J	M
Dimensions
Work Support, Air Rise, Cartridge
10-0606-10	1 - 16	1.62	0.25	1.59	0.27	0.21	0.87	0.63	5/16-18 x 0.29	0.95
10-0609-06	1 5/16 - 16	2.06	0.38	1.96	0.34	0.25	1.12	0.81	3/8-16 x0 .24	1.22

All dimensions are in inches.

Cavity

Air Advance Work Supports

Work Support Cavity Dimensions:

10-0606-10 #1000 Air Advance

Work Support Cavity Dimensions:

10-0609-06 #2500 Air Advance

Air Filter Reg.

Air Filter Regulator

Model No.	PSI Output
Air Filter Regulators
50-0440-01	0-25 psi output
50-0440-02	0-125 psi output

Ask us about air valves to control your work supports either manually or electrically.

SpecificationsFeaturesDimensionsCapacity ChartsCartridge Cavity Air Filter Reg.

Air Advance Work Supports

Specifications

Model No.	Support Capacity* (lb.)	Mounting Style***	Hydraulic Connection	Contact Force (lb.)**	Stroke (in.)	Base Dimensions (in.)	Retracted Height (in.)	Oil Capacity (cu.in.)
Specifications
Air Advance Supports, air pressure lifts plunger, spring retracts, hydraulic pressure locks.
10-0606-10	1000	Cartridge	Cavity	4	.25	N/A	1.62	.05
10-0606-11		Base	SAE Ports			.85 x 1.25 x 1.75	1.93	.12
10-0606-12		Base	Manifold			.90 x 1.31 x 1.75	1.99	.13
10-0609-06	2500	Cartridge	Cavity	8	.38	N/A	2.06	.08
10-0609-07		Base	SAE Ports			.91 x 1.50 x 2.31	2.40	.13
10-0609-08		Base	Manifold			.91 x 1.50 x 2.31	2.40	.10
10-0615-06	7500	Base	SAE Ports	20	.50	1.00 x 2.50 x 3.00	3.87	.81
10-0620-07	12500	Base	SAE Ports	57	.75	1.25 x 3.50 x 3.81	4.50	1.79
10-0629-10	20000	Base	SAE Ports	116	1.00	1.99 x 4.75 x 4.88	6.15	3.37

* Support capacities are listed at 5,000 psi maximum operating pressure.
Support capacities for other pressures must be determined by consulting the capacity chart.

** Maximum air pressure for advancing the plunger is 25 psi.
Order air regulator - 0-25 psi to more precisely control plunger advance force.

*** For cartridge mount models, see cavity dimensions.

Air Advance Work Supports

For Supporting Fragile Parts or Use In Harsh Environments

Available in four capacities from 1,000 to 12,500 lb., adapt to support fragile parts, heavy parts or "hog out" applications.
For harsh environments (where contaminants such as aluminum or cast iron fines, corrosive or tacky coolants are present) we suggest running a constant "air spring" to keep the plunger extended and the problem contaminants out.
Normally retracted plungers provide additional clearance for part loading. Advance them with air pressure, exerting ONLY the force needed to "kiss" the part, then "freeze" the plunger in place hydraulically.
Heavier attachments may be used with air advance supports because of their additional air powered lifting/contact force. Stainless steel plunger and sleeve assemblies help guard against corrosion in most machining environments.

Standard SAE porting and alternate o-ring manifold face seal is located in the base of the support for bolt down installation, The base can be removed for direct cartridge mounting.
Stainless steel plunger and sleeve assemblies help guard against corrosion in most machining environments.
Special large diameter plungers and sleeves provide greater rigidity.

Air Advance Work Supports

Dimensions

For proper sealing, mating surface must be< flat within 0.003 with a maximum
63 µin R_a surface finish.

Model No.	A	B	C	D	E	F	G	H	J	K	L	M	N
Dimensions
Air Advance Supports, air pressure lifts plunger, spring retracts, hydraulic pressure locks.
10-0606-11	1 - 16	1.93	0.25	1.06	0.85	0.21	0.87	0.63	5/16-18 x 0.29	1.25	0.63	0.90	0.45
10-0606-12	1 - 16	1.99	0.25	1.06	0.90	0.21	0.87	0.63	5/16-18 x 0.29	1.31	0.66	0.90	0.45
10-0609-07	1 5/16-16	2.40	0.38	1.39	0.91	0.25	1.13	0.81	3/8-16 x 0.24	1.50	0.75	1.06	0.53
10-0609-08	1 5/16-16	2.40	0.38	1.39	0.91	0.25	1.13	0.81	3/8-16 x 0.24	1.50	0.75	1.06	0.53
10-0615-06	2 1/4-16	3.87	.50	2.67	1.00	0.50	1.99	1.50	1/2-13 x 0.63	2.50	1.25	2.06	1.03
10-0620-07	3 - 16	4.49	.76	3.00	1.24	0.53	2.74	2.00	5/8-11 x 0.63	3.50	1.75	2.87	1.44
10-0629-10	4 1/4-16	6.15	1.00	3.97	1.99	0.80	N/A	2.85	3/4-16 x 0.87	4.75	2.38	4.00	2.00

Model No.	Q	R	S	T	V	W	X	Y	Z	AA	AB	AC	AD	AE	AF	AG
Air Advance Supports, air pressure lifts plunger, spring retracts, hydraulic pressure locks.
10-0606-11	0.69	1.20	0.51	0.22	SAE 2	0.33	SAE 2	0.33	0.37	7	N/A	N/A	N/A	N/A	N/A	0.92
10-0606-12	0.69	1.20	0.51	0.22	SAE 2	0.33	N/A	N/A	0.37	7	0.38	0.69	N/A	N/A	N/A	0.92
10-0609-07	0.94	1.66	0.72	0.28	SAE 4	0.43	SAE 4	0.43	0.38	7	N/A	N/A	N/A	N/A	N/A	1.22
10-0609-08	0.94	1.66	0.72	0.28	SAE 4	0.43	N.A	N/A	0.38	7	0.43	0.88	N/A	N/A	N/A	1.22
10-0615-06	1.25	2.41	1.03	0.28	SAE 4	0.63	SAE 4	0.63	0.38	N/A	N/A	N/A	1.13	0.16	N/A	2.16
10-0620-07	1.75	3.22	1.44	0.34	SAE 4	0.94	SAE 4	0.94	0.38	N/A	N/A	N/A	1.63	0.16	N/A	2.91
10-0629-10	2.38	4.00	2.00	0.41	SAE 4	1.25	SAE 4	1.25	0.37	N/A	N/A	N/A	0.39	4.16	0.39	4.16

*All dimensions are in inches.

*Wrench flats on plunger available upon request. Contact Vektek Sales Department for model numbers, dimensional information and availability.

Call Us:	800-992-0236	Home \| About Us \| Products \| Catalogs \| CAD Library \| Resources \| FAQ/Help \| Careers \| Events \| Contact Us \| Members
+1-	913-365-1045	PO Terms & Conditions © Copyright 1996 - 2024 Vektek LLC

Air Advance

Air Advance Work Supports

Air Advance Work Supports

Air Advance Work Supports

For proper sealing, mating surface must be< flat within 0.003 with a maximum 63 µin Ra surface finish.

Air Advance Work Supports

Cartridge Dimensions

Air Advance Work Supports

Air Filter Regulator

For proper sealing, mating surface must be< flat within 0.003 with a maximum
63 µin R_a surface finish.