Vektek: Products


	Rapid Order View Cart Login Sign Up

You have 0 item(s)
in your cart.
View Cart

Spring Advance

Home > Products
Spring Advance (PDF 681.00 KB)

Specifications

Spring Advance Work Supports

Specifications

Model No.	Support Capacity* (lb.)	Mounting Style**	Contact Force (lb.)	Stroke (in.)	Base Dimensions (in.)	Extended Height (in.)	Oil Capacity (cu in.)
Specifications
Spring Advance Supports, spring force lifts plunger, part weight depresses plunger, hydraulic pressure locks
10-0506-10	1000	Cartridge	1 - 2	0.25	N/A	1.87	0.05
10-0506-11		SAE-ported			0.85 x 1.25 x 1.75	2.18	0.12
10-0506-12		Manifold			0.90 x 1.31 x 1.75	2.24	0.13
10-0509-06	2500	Cartridge	2 - 6	0.38	N/A	2.44	0.08
10-0509-07		SAE-ported			0.91 x 1.50 x 2.31	2.78	0.13
10-0509-08		Manifold			0.91 x 1.50 x 2.31	2.78	0.10
10-0515-06	7500	SAE-ported	9 - 18	0.50	1.00 x 2.50 x 3.00	4.38	0.81
10-0520-07	12500	SAE-ported	11 - 16	0.75	1.25 x 3.50 x 3.81	5.25	1.79
10-0529-10	20000	SAE-ported	38 - 72	0.82	1.99 x 4.75 x 4.88	6.97	3.37

* Support capacities are listed at 5,000 psi maximum operating pressure. Support capacities for other pressures must be determined by consulting the capacity chart.

*** For cartridge mount models, see cavity dimensions.

Features

Spring Advance Work Supports

For Supporting Most Parts

Available in four capacities from 1,000 to 12,500 lb., adapt to support fragile parts, heavy parts or "hog out" applications
When using the 3-2-1 locating principles, you often need additional support for a 4th, 5th or even more areas on your part. A work support will give you "floating" locators which won't interfere with your 3, 2 or 1 locators. Clamp over your locators then lock the supports. Even clamp over the supports if you need to
Spring extended plungers maintain contact with the part during loading exerting only spring force against the part; then hydraulically "freezes" the plunger without exerting any additional force on the part .
Standard SAE porting and alternate o-ring manifold face seal is located in the base of the support for bolt down installation, The base can be removed for direct cartridge mounting.

Proprietary wiper and seal designs reduce contamination and drag for longer lasting, better performing work supports.
Stainless steel plunger and sleeve assemblies help guard against corrosion in most machining environments.
Hand fitted plunger/sleeve assemblies allow VektorFlo^® work supports to begin to lock at lower pressures and build support faster.
If spring advance supports are used in flood coolant environments (consider air advance) attach tubing to the vent port and route to clean, dry air to keep coolant from being drawn in and becoming sticky on internal surfaces.

Dimensions

Spring Advance Work Supports

Dimensions

For proper sealing, mating surface must be flat within 0.003 with a maximum
63 µin R_a surface finish.

Model No.	Capacity (lb)	A	B	C	D	E	F	G	H	J
Dimensions
Spring Advance Supports, spring force lifts plunger, part weight depresses plunger, hydraulic pressure locks.
10-0506-11	1000	1 - 16	2.18	0.25	1.06	0.85	0.21	0.87	0.63	5/16 -18 x 0.27
10-0506-12	1000	1 - 16	2.24	0.25	1.06	0.90	0.21	0.87	0.63	5/16 -18 x 0.27
10-0509-07	2500	1 5/16 - 16	2.78	0.38	1.39	0.91	0.25	1.12	0.81	3/8-16 x 0.46
10-0509-08	2500	1 5/16 - 16	2.78	0.38	1.39	0.91	0.25	1.12	0.81	3/8-16 x 0.46
10-0515-06	7500	2 1/4 - 16	4.38	0.50	2.67	1.00	0.50	1.99	1.50	1/2-13 x 0.63
10-0520-07	12500	3 - 16	5.24	0.75	3.00	1.24	0.53	2.74	2.00	5/8-11 x 0.63
10-0529-10	20000	4 1/4 - 16	6.96	0.82	3.97	1.99	0.80	N/A	2.85	3/4-16 X 0.87

Model No.	Capacity (lb)	K	L	M	N	P	Q	R	S	T
Spring Advance Supports, spring force lifts plunger, part weight depresses plunger, hydraulic pressure locks.
10-0506-11	1000	1.25	0.63	0.90	0.45	1.75	0.69	1.20	0.51	0.22
10-0506-12	1000	1.31	0.66	0.90	0.45	1.75	0.69	1.20	0.51	0.22
10-0509-07	2500	1.50	0.75	1.06	0.53	2.31	0.94	1.66	0.72	0.28
10-0509-08	2500	1.50	0.75	1.06	0.53	2.31	0.94	1.66	0.72	0.28
10-0515-06	7500	2.50	1.25	2.06	1.03	3.00	1.25	2.41	1.03	0.28
10-0520-07	12500	3.50	1.75	2.87	1.44	3.81	1.75	3.22	1.44	0.34
10-0529-10	20000	4.75	2.38	4.00	2.00	4.88	2.38	4.00	2.00	0.41

Model No.	Capacity (lb)	V	W	X	Y	Z	AA	AB	AC	AD	AE	AF	AG
Spring Advance Supports, spring force lifts plunger, part weight depresses plunger, hydraulic pressure locks.
10-0506-11	1000	SAE 2	0.33	SAE 2	0.33	0.37	7	N/A	N/A	N/A	N/A	N/A	.92
10-0506-12	1000	SAE 2	0.33	N/A	N/A	0.37	7	0.38	0.69	N/A	N/A	N/A	.92
10-0509-07	2500	SAE 4	0.43	SAE 4	0.43	0.38	7	N/A	N/A	N/A	N/A	N/A	1.22
10-0509-08	2500	SAE 4	0.43	N/A	N/A	0.38	7	0.43	0.88	N/A	N/A	N/A	1.22
10-0515-06	7500	SAE 4	0.63	SAE 4	0.63	0.38	N/A	N/A	N/A	1.13	0.16	N/A	2.16
10-0520-07	12500	SAE 4	0.94	SAE 4	0.94	0.38	N/A	N/A	N/A	1.63	0.16	N/A	2.91
10-0529-10	20000	SAE 4	1.25	SAE 4	1.25	0.37	N/A	N/A	N/A	2.13	N/A	.39	4.16

All dimensions are in inches.

* Support capacities are listed at 5,000 psi maximum operating presssure. Support capacities for other pressures must be determined by consulting the Capacity graphs.

**For cartridge mount models, see Cavity Dimension drawings.

Cartridge Dims

Spring Advance Cartridge

Model No.	Capacity (lb)	A	B	C	D	E	F	G	H	J	M
Dimensions
Work Support, Spring Rise, Cartridge
10-0506-10	1000	1 - 16	1.87	0.25	1.59	0.27	0.21	0.87	0.63	5/16-18 x 0.27	0.95
10-0509-06	2500	1 5/16 - 16	2.43	0.38	1.96	0.34	0.25	1.12	0.81	3/8-16 x 0.46	1.22

*All dimensions are in inches.

Capacity Charts

Spring Advance Work Supports

Capacity Charts

Cavity Dims

Spring Advance Work Supports

Cavity Dimensions

10-0506-10 #1000 Spring Advance

10-0509-06 #2500 Spring Advance

SpecificationsFeaturesDimensionsCartridge DimsCapacity ChartsCavity Dims

Spring Advance Work Supports

Specifications

Model No.	Support Capacity* (lb.)	Mounting Style**	Contact Force (lb.)	Stroke (in.)	Base Dimensions (in.)	Extended Height (in.)	Oil Capacity (cu in.)
Specifications
Spring Advance Supports, spring force lifts plunger, part weight depresses plunger, hydraulic pressure locks
10-0506-10	1000	Cartridge	1 - 2	0.25	N/A	1.87	0.05
10-0506-11		SAE-ported			0.85 x 1.25 x 1.75	2.18	0.12
10-0506-12		Manifold			0.90 x 1.31 x 1.75	2.24	0.13
10-0509-06	2500	Cartridge	2 - 6	0.38	N/A	2.44	0.08
10-0509-07		SAE-ported			0.91 x 1.50 x 2.31	2.78	0.13
10-0509-08		Manifold			0.91 x 1.50 x 2.31	2.78	0.10
10-0515-06	7500	SAE-ported	9 - 18	0.50	1.00 x 2.50 x 3.00	4.38	0.81
10-0520-07	12500	SAE-ported	11 - 16	0.75	1.25 x 3.50 x 3.81	5.25	1.79
10-0529-10	20000	SAE-ported	38 - 72	0.82	1.99 x 4.75 x 4.88	6.97	3.37

* Support capacities are listed at 5,000 psi maximum operating pressure. Support capacities for other pressures must be determined by consulting the capacity chart.

*** For cartridge mount models, see cavity dimensions.

Spring Advance Work Supports

For Supporting Most Parts

Available in four capacities from 1,000 to 12,500 lb., adapt to support fragile parts, heavy parts or "hog out" applications
When using the 3-2-1 locating principles, you often need additional support for a 4th, 5th or even more areas on your part. A work support will give you "floating" locators which won't interfere with your 3, 2 or 1 locators. Clamp over your locators then lock the supports. Even clamp over the supports if you need to
Spring extended plungers maintain contact with the part during loading exerting only spring force against the part; then hydraulically "freezes" the plunger without exerting any additional force on the part .
Standard SAE porting and alternate o-ring manifold face seal is located in the base of the support for bolt down installation, The base can be removed for direct cartridge mounting.

Proprietary wiper and seal designs reduce contamination and drag for longer lasting, better performing work supports.
Stainless steel plunger and sleeve assemblies help guard against corrosion in most machining environments.
Hand fitted plunger/sleeve assemblies allow VektorFlo^® work supports to begin to lock at lower pressures and build support faster.
If spring advance supports are used in flood coolant environments (consider air advance) attach tubing to the vent port and route to clean, dry air to keep coolant from being drawn in and becoming sticky on internal surfaces.

Spring Advance Work Supports

Dimensions

For proper sealing, mating surface must be flat within 0.003 with a maximum
63 µin R_a surface finish.

Model No.	Capacity (lb)	A	B	C	D	E	F	G	H	J
Dimensions
Spring Advance Supports, spring force lifts plunger, part weight depresses plunger, hydraulic pressure locks.
10-0506-11	1000	1 - 16	2.18	0.25	1.06	0.85	0.21	0.87	0.63	5/16 -18 x 0.27
10-0506-12	1000	1 - 16	2.24	0.25	1.06	0.90	0.21	0.87	0.63	5/16 -18 x 0.27
10-0509-07	2500	1 5/16 - 16	2.78	0.38	1.39	0.91	0.25	1.12	0.81	3/8-16 x 0.46
10-0509-08	2500	1 5/16 - 16	2.78	0.38	1.39	0.91	0.25	1.12	0.81	3/8-16 x 0.46
10-0515-06	7500	2 1/4 - 16	4.38	0.50	2.67	1.00	0.50	1.99	1.50	1/2-13 x 0.63
10-0520-07	12500	3 - 16	5.24	0.75	3.00	1.24	0.53	2.74	2.00	5/8-11 x 0.63
10-0529-10	20000	4 1/4 - 16	6.96	0.82	3.97	1.99	0.80	N/A	2.85	3/4-16 X 0.87

Model No.	Capacity (lb)	K	L	M	N	P	Q	R	S	T
Spring Advance Supports, spring force lifts plunger, part weight depresses plunger, hydraulic pressure locks.
10-0506-11	1000	1.25	0.63	0.90	0.45	1.75	0.69	1.20	0.51	0.22
10-0506-12	1000	1.31	0.66	0.90	0.45	1.75	0.69	1.20	0.51	0.22
10-0509-07	2500	1.50	0.75	1.06	0.53	2.31	0.94	1.66	0.72	0.28
10-0509-08	2500	1.50	0.75	1.06	0.53	2.31	0.94	1.66	0.72	0.28
10-0515-06	7500	2.50	1.25	2.06	1.03	3.00	1.25	2.41	1.03	0.28
10-0520-07	12500	3.50	1.75	2.87	1.44	3.81	1.75	3.22	1.44	0.34
10-0529-10	20000	4.75	2.38	4.00	2.00	4.88	2.38	4.00	2.00	0.41

Model No.	Capacity (lb)	V	W	X	Y	Z	AA	AB	AC	AD	AE	AF	AG
Spring Advance Supports, spring force lifts plunger, part weight depresses plunger, hydraulic pressure locks.
10-0506-11	1000	SAE 2	0.33	SAE 2	0.33	0.37	7	N/A	N/A	N/A	N/A	N/A	.92
10-0506-12	1000	SAE 2	0.33	N/A	N/A	0.37	7	0.38	0.69	N/A	N/A	N/A	.92
10-0509-07	2500	SAE 4	0.43	SAE 4	0.43	0.38	7	N/A	N/A	N/A	N/A	N/A	1.22
10-0509-08	2500	SAE 4	0.43	N/A	N/A	0.38	7	0.43	0.88	N/A	N/A	N/A	1.22
10-0515-06	7500	SAE 4	0.63	SAE 4	0.63	0.38	N/A	N/A	N/A	1.13	0.16	N/A	2.16
10-0520-07	12500	SAE 4	0.94	SAE 4	0.94	0.38	N/A	N/A	N/A	1.63	0.16	N/A	2.91
10-0529-10	20000	SAE 4	1.25	SAE 4	1.25	0.37	N/A	N/A	N/A	2.13	N/A	.39	4.16

All dimensions are in inches.

* Support capacities are listed at 5,000 psi maximum operating presssure. Support capacities for other pressures must be determined by consulting the Capacity graphs.

**For cartridge mount models, see Cavity Dimension drawings.

Call Us:	800-992-0236	Home \| About Us \| Products \| Catalogs \| CAD Library \| Resources \| FAQ/Help \| Careers \| Events \| Contact Us \| Members
+1-	913-365-1045	PO Terms & Conditions © Copyright 1996 - 2024 Vektek LLC

Spring Advance

Spring Advance Work Supports

Spring Advance Work Supports

Spring Advance Work Supports

For proper sealing, mating surface must be flat within 0.003 with a maximum 63 µin Ra surface finish.

Spring Advance Cartridge

Spring Advance Work Supports

Spring Advance Work Supports

For proper sealing, mating surface must be flat within 0.003 with a maximum
63 µin R_a surface finish.