Vektek: Products


	Rapid Order View Cart Login Sign Up

You have 0 item(s)
in your cart.
View Cart

Fluid Advance

Home > Products
Fluid Advance (PDF 986.00 KB)

Specs

Fluid Advance Work Supports

Specifications

Support Capacity* (lb.)	Support Capacity (lbs.)	Mounting Style***	Contact Force***(lb)	Stroke (in)	Base Dimensions (in.)	Retracted height (in.)	Oil Capacity ** (cu. in.)
Specifications
Fluid Advance Supports, hydraulic pressure lifts spring which lifts plunger, hydraulic pressure locks.
10-0706-04	1000	Cartridge	1-6	0.25 0.50	N/A	2.12 2.62	0.08 0.09
10-0706-14	1400	Cartridge	1-6	0.25 0.50	N/A	2.12 2.62	0.08 0.09
10-0806-05	1000	SAE/Manifold	1 - 6	0.25 0.50	0.90 X 1.31 X 1.75	2.51 3.01	0.16 0.17
10-0806-15	1400	SAE/Manifold	1 - 6	0.25 0.50	0.90 X 1.31 X 1.75	2.51 3.01	0.16 0.17
10-0708-07	2500	Cartridge	3 - 10	0.25 0.50	N/A	2.83 3.33	0.12 0.14
10-0708-17	3000	Cartridge	3 - 10	0.25 0.50	N/A	2.83 3.33	0.12 0.14
10-0808-07	2500	SAE/Manifold	3 - 10	0.25 0.50	1.25 X 1.50 X 2.31	3.25 3.75	0.19 0.21
10-0808-17	3000	SAE/Manifold	3 - 10	0.25 0.50	1.25 X 1.50 X 2.31	3.25 3.75	0.19 0.21
10-0715-06	4000	Cartridge	8 - 12	0.50	N/A	2.85	0.59
10-0815-06	4000	SAE/Manifold	8 - 12	0.50	0.99 X 2.88 X 3.19	3.25	0.65

* Support capacities are listed at 5,000 psi maximum operating pressure. Support capacities for other pressures must be determined by consulting the capacity chart.

** Restrict flow rate to a maximum of 130 cu. in./minute.

*** For cartridge mount models, see cavity dimensions.

NOTE: The maximum system back-pressure a fluid advance work support can overcome is 10 psi. Returning back-pressure greater than 10 psi may cause slow or failed retraction.

Features

Fluid Advance Work Supports

For Retracted Plunger Applications

Available in three capacities 1000, 2500 and 4000 lb.
Normally retracted plungers do not interfere with part loading. Advance them with hydraulic pressure, exerting only spring force to bring the plunger into contact with your part (this force is not adjustable by adjusting hydraulic pressure). Hydraulic pressure then automatically sequences, "freezing" the plunger properly against the part. All this accomplished with a single hydraulic line
Ventless configuration and built in wiper keeps chips anddebris out, reducing the chance of plunger/sleeve stickingor binding.
Stainless steel plunger and sleeve assemblies help guard against corrosion in most machining environments.
Plunger and sleeve assemblies designed to help guard against corrosion in most machining environments.
Standard SAE porting and alternate
o-ring manifold face seal is located in the base of the support for bolt down installation, The base can be removed for direct cartridge mounting

Note: Heavy end effectors are not recommended.

Feeder caps and retaining collars are available as mounting options

Dimensions

Fluid Advance Work Supports

Dimensions

For proper sealing, mating surface
must be flat within 0.003 with a
maximum 63 µin R_a surface finish.

Model No.	A	B	C	D	E	F	G	H	J	K	L	M	N	P
Dimensions
Fluid Advance Supports, hydraulic pressure lifts spring which lifts plunger, hydraulic pressure locks.
10-0806-05	1 - 16	2.51 3.01	0.25 0.50	1.19 1.67	0.90	0.21	0.88	0.62	0.14	1.31	0.66	0.90	0.45	1.75
10-0806-15	1 - 16	2.51 3.01	0.25 0.50	1.19 1.67	0.90	0.21	0.88	0.62	0.14	1.31	0.66	0.90	0.45	1.75
10-0808-07	1 1/4-16	3.25 3.75	0.25 0.50	1.35 1.85	1.25	0.36	1.13	0.81	0.19	1.50	0.75	1.06	0.53	2.31
10-0808-17	1 1/4-16	3.25 3.75	0.25 0.50	1.35 1.85	1.25	0.36	1.13	0.81	0.19	1.50	0.75	1.06	0.53	2.31
10-0815-06	2 1/4-16	3.25	0.50	1.57	0.99	0.50	2.00	1.50	0.19	2.88	1.44	2.06	1.03	3.19

Model No.	Q	R	S	T	V	W	X	Y	Z	AA	AB	AC	AD	AE
Fluid Advance Supports, hydraulic pressure lifts spring which lifts plunger, hydraulic pressure locks.
10-0806-05	0.69	1.20	0.51	0.22	0.50	5/16 - 18 x 0.20	SAE 2	0.33	0.38	7°	0.38	0.69	YES	N/A
10-0806-15	0.69	1.20	0.51	0.22	0.50	3/8 - 24 x 0.20	SAE 2	0.33	0.38	7°	0.38	0.69	YES	N/A
10-0808-07	0.94	1.66	0.72	0.28	0.63	7/16 - 14 x 0.25	SAE 4	0.43	0.38	N/A	N/A	N/A	N/A	YES
10-0808-17	0.94	1.66	0.72	0.28	0.63	7/16 - 14 x 0.25	SAE 4	0.43	0.38	N/A	N/A	N/A	N/A	YES
10-0815-06	1.44	2.41	1.03	0.28	0.75	1/2 - 13 x 0.25	SAE 4	0.63	0.38	N/A	N/A	N/A	N/A	YES

*All dimensions are in inches.

Cartridge

Model No.	Capacity (lb)	A	B	C	D	E	F	G	H	J	M	V	W
Cartridge Dimensions
Fluid Advance Supports, hydraulic pressure lifts spring which lifts plunger, hydraulic pressure locks.
10-0706-04	1000	1 - 16	2.12 2.62	0.25 0.50	1.68 2.18	0.24	0.21	0.88	0.62	0.14	0.92	0.50	5/16 - 18 x 0.20
10-0706-14	1400	1 - 16	2.12 2.62	0.25 0.50	1.68 2.18	0.24	0.21	0.88	0.62	0.14	0.92	0.50	3/8 - 24 x 0.20
10-0708-07	2500	1 1/4-16	2.83 3.33	0.25 0.50	2.17 2.67	0.31	0.36	1.13	0.81	0.19	1.17	0.63	7/16 - 14 x 0.25
10-0708-17	3000	1 1/4-16	2.83 3.33	0.25 0.50	2.17 2.67	0.31	0.36	1.13	0.81	0.19	1.17	0.63	7/16 - 14 x 0.25
10-0715-06	4000	2 1/4-16	2.85	0.50	2.16	0.19	0.50	2.00	1.50	0.19	2.16	0.75	1/2 - 13 x 0.25

*All dimensions are in inches.

Capacity

Fluid Advance Work Supports

Capacity Charts

Cavity

Fluid Advance Work Supports

Cavity Dimensions

Work Support Cavity Dimensions:

10-0706-04 #1000 Fluid Advance

Work Support Cavity Dimensions:

10-0708-07 #2500 Fluid Advance

Work Support Cavity Dimensions:

10-0715-06 #4000 Fluid Advance

Accessories

*All dimensions are in inches.

Model No.	A	B	C	D
Feeder Caps
For Use with Fluid Advance Work Supports Only
30-9872-39	3/4-16 UN	0.85	0.38	1.00
30-9872-40	1-16 UN	1.00	0.53	1.25
30-9872-43	1 1/4-16 UN	1.38	0.85	1.50
30-9872-46	1 3/4-16 UN	1.47	1.00	2.00
30-9872-47	2 1/4-16 UN	0.99	0.59	2.50

Shield Model No.	Work Support Model No.	Work Support Capacity (lbs)	OD Threads	A	B	C	D
Fluid Advance Work Supports Shields
For Use with Fluid Advance Work Supports Only
81-0706-01	10-0704-10	1000	3/4-16 UN	0.42	0.40	0.25	0.85
81-0706-01	10-0804-20	1000	3/4-16 UN	0.42	0.40	0.25	0.85
81-0707-01	10-0706-04	1000	1-16 UN	0.66	0.50	0.30	1.11
81-0707-01	10-0806-05	1000	1-16 UN	0.66	0.50	0.30	1.11
81-0703-01	10-0706-14	1400	1-16 UN	0.66	0.88	0.66	1.12
81-0703-01	10-0806-15	1400	1-16 UN	0.66	0.88	0.66	1.12
81-0708-01	10-0708-07	2500	1 1/4-16 UN	0.85	0.84	0.44	1.38
	10-0708-17	3000
	10-0808-07	2500
	10-0808-17	3000
81-0715-01	10-0715-06	4000	2 1/4-16 UN	0.92	1.00	0.58	2.36
81-0715-01	10-0815-06	4000	2 1/4-16 UN	0.92	1.00	0.58	2.36
81-0709-01	10-0710-10	8000	1 3/4-16 UN	1.06	0.87	0.36	1.86
81-0709-01	10-0810-20	8000	1 3/4-16 UN	1.06	0.87	0.36	1.86

Work Support Capacity (lb)	B	C	Lock Nut
Machining Specifications
Use with Work Supports Mounted with a Feeder Cap or Lock Nut
1,000	1 - 16	1.44	N/A
2,500	1 1/4 - 16	1.73	64-0012-00
4,000	2 1/4 - 16	2.89	64-0022-00

Contact Bolt

Self-produced Contact Bolt

Model No.	Capacity (lb)	O-Ring Part No.	A	B	C	D	E
Self-Produced Contact Bolt
Fluid Advance Supports, hydraulic pressure lifts spring which lifts plunger, hydraulic pressure locks.
10-0706-04 10-0806-05	1,000 Std. Stroke	39-0510-59 (0.236 x 0.059)	0.384	0.1.97	0.238	0.047	5/16 - 18 UNC - 2A
10-0706-14 10-0806-15	1,400 Long Stroke	39-0000-69 (0.301 x 0.064)	0.450	0.1.97	0.302	0.047	3/8 - 24 UNF - 2A
10-0708-07 10-0808-07	2,500 Std. Stroke	55-2500-05 (0.301 x 0.070)	0.493	0.250	0.328	0.070	7/16 - 14 UNC - 2A
10-0708-17 10-0808-17	3,000 Long Stroke	55-2500-05 (0.301 x 0.070)	0.493	0.250	0.328	0.070	7/16 - 14 UNC - 2A
10-0715-06 10-0815-06	4,000	39-0020-09 (0.364 x 0.070)	0.555	0.250	0.390	0.070	1/2 - 13 UNC - 2A

SpecsFeaturesDimensionsCartridgeCapacityCavityAccessoriesContact Bolt

Fluid Advance Work Supports

Specifications

Support Capacity* (lb.)	Support Capacity (lbs.)	Mounting Style***	Contact Force***(lb)	Stroke (in)	Base Dimensions (in.)	Retracted height (in.)	Oil Capacity ** (cu. in.)
Specifications
Fluid Advance Supports, hydraulic pressure lifts spring which lifts plunger, hydraulic pressure locks.
10-0706-04	1000	Cartridge	1-6	0.25 0.50	N/A	2.12 2.62	0.08 0.09
10-0706-14	1400	Cartridge	1-6	0.25 0.50	N/A	2.12 2.62	0.08 0.09
10-0806-05	1000	SAE/Manifold	1 - 6	0.25 0.50	0.90 X 1.31 X 1.75	2.51 3.01	0.16 0.17
10-0806-15	1400	SAE/Manifold	1 - 6	0.25 0.50	0.90 X 1.31 X 1.75	2.51 3.01	0.16 0.17
10-0708-07	2500	Cartridge	3 - 10	0.25 0.50	N/A	2.83 3.33	0.12 0.14
10-0708-17	3000	Cartridge	3 - 10	0.25 0.50	N/A	2.83 3.33	0.12 0.14
10-0808-07	2500	SAE/Manifold	3 - 10	0.25 0.50	1.25 X 1.50 X 2.31	3.25 3.75	0.19 0.21
10-0808-17	3000	SAE/Manifold	3 - 10	0.25 0.50	1.25 X 1.50 X 2.31	3.25 3.75	0.19 0.21
10-0715-06	4000	Cartridge	8 - 12	0.50	N/A	2.85	0.59
10-0815-06	4000	SAE/Manifold	8 - 12	0.50	0.99 X 2.88 X 3.19	3.25	0.65

* Support capacities are listed at 5,000 psi maximum operating pressure. Support capacities for other pressures must be determined by consulting the capacity chart.

** Restrict flow rate to a maximum of 130 cu. in./minute.

*** For cartridge mount models, see cavity dimensions.

NOTE: The maximum system back-pressure a fluid advance work support can overcome is 10 psi. Returning back-pressure greater than 10 psi may cause slow or failed retraction.

Fluid Advance Work Supports

Dimensions

For proper sealing, mating surface
must be flat within 0.003 with a
maximum 63 µin R_a surface finish.

Model No.	A	B	C	D	E	F	G	H	J	K	L	M	N	P
Dimensions
Fluid Advance Supports, hydraulic pressure lifts spring which lifts plunger, hydraulic pressure locks.
10-0806-05	1 - 16	2.51 3.01	0.25 0.50	1.19 1.67	0.90	0.21	0.88	0.62	0.14	1.31	0.66	0.90	0.45	1.75
10-0806-15	1 - 16	2.51 3.01	0.25 0.50	1.19 1.67	0.90	0.21	0.88	0.62	0.14	1.31	0.66	0.90	0.45	1.75
10-0808-07	1 1/4-16	3.25 3.75	0.25 0.50	1.35 1.85	1.25	0.36	1.13	0.81	0.19	1.50	0.75	1.06	0.53	2.31
10-0808-17	1 1/4-16	3.25 3.75	0.25 0.50	1.35 1.85	1.25	0.36	1.13	0.81	0.19	1.50	0.75	1.06	0.53	2.31
10-0815-06	2 1/4-16	3.25	0.50	1.57	0.99	0.50	2.00	1.50	0.19	2.88	1.44	2.06	1.03	3.19

Model No.	Q	R	S	T	V	W	X	Y	Z	AA	AB	AC	AD	AE
Fluid Advance Supports, hydraulic pressure lifts spring which lifts plunger, hydraulic pressure locks.
10-0806-05	0.69	1.20	0.51	0.22	0.50	5/16 - 18 x 0.20	SAE 2	0.33	0.38	7°	0.38	0.69	YES	N/A
10-0806-15	0.69	1.20	0.51	0.22	0.50	3/8 - 24 x 0.20	SAE 2	0.33	0.38	7°	0.38	0.69	YES	N/A
10-0808-07	0.94	1.66	0.72	0.28	0.63	7/16 - 14 x 0.25	SAE 4	0.43	0.38	N/A	N/A	N/A	N/A	YES
10-0808-17	0.94	1.66	0.72	0.28	0.63	7/16 - 14 x 0.25	SAE 4	0.43	0.38	N/A	N/A	N/A	N/A	YES
10-0815-06	1.44	2.41	1.03	0.28	0.75	1/2 - 13 x 0.25	SAE 4	0.63	0.38	N/A	N/A	N/A	N/A	YES

*All dimensions are in inches.

Model No.	Capacity (lb)	A	B	C	D	E	F	G	H	J	M	V	W
Cartridge Dimensions
Fluid Advance Supports, hydraulic pressure lifts spring which lifts plunger, hydraulic pressure locks.
10-0706-04	1000	1 - 16	2.12 2.62	0.25 0.50	1.68 2.18	0.24	0.21	0.88	0.62	0.14	0.92	0.50	5/16 - 18 x 0.20
10-0706-14	1400	1 - 16	2.12 2.62	0.25 0.50	1.68 2.18	0.24	0.21	0.88	0.62	0.14	0.92	0.50	3/8 - 24 x 0.20
10-0708-07	2500	1 1/4-16	2.83 3.33	0.25 0.50	2.17 2.67	0.31	0.36	1.13	0.81	0.19	1.17	0.63	7/16 - 14 x 0.25
10-0708-17	3000	1 1/4-16	2.83 3.33	0.25 0.50	2.17 2.67	0.31	0.36	1.13	0.81	0.19	1.17	0.63	7/16 - 14 x 0.25
10-0715-06	4000	2 1/4-16	2.85	0.50	2.16	0.19	0.50	2.00	1.50	0.19	2.16	0.75	1/2 - 13 x 0.25

*All dimensions are in inches.

Fluid Advance Work Supports

Cavity Dimensions

Work Support Cavity Dimensions:

10-0706-04 #1000 Fluid Advance

Work Support Cavity Dimensions:

10-0708-07 #2500 Fluid Advance

Work Support Cavity Dimensions:

10-0715-06 #4000 Fluid Advance

*All dimensions are in inches.

Model No.	A	B	C	D
Feeder Caps
For Use with Fluid Advance Work Supports Only
30-9872-39	3/4-16 UN	0.85	0.38	1.00
30-9872-40	1-16 UN	1.00	0.53	1.25
30-9872-43	1 1/4-16 UN	1.38	0.85	1.50
30-9872-46	1 3/4-16 UN	1.47	1.00	2.00
30-9872-47	2 1/4-16 UN	0.99	0.59	2.50

Shield Model No.	Work Support Model No.	Work Support Capacity (lbs)	OD Threads	A	B	C	D
Fluid Advance Work Supports Shields
For Use with Fluid Advance Work Supports Only
81-0706-01	10-0704-10	1000	3/4-16 UN	0.42	0.40	0.25	0.85
81-0706-01	10-0804-20	1000	3/4-16 UN	0.42	0.40	0.25	0.85
81-0707-01	10-0706-04	1000	1-16 UN	0.66	0.50	0.30	1.11
81-0707-01	10-0806-05	1000	1-16 UN	0.66	0.50	0.30	1.11
81-0703-01	10-0706-14	1400	1-16 UN	0.66	0.88	0.66	1.12
81-0703-01	10-0806-15	1400	1-16 UN	0.66	0.88	0.66	1.12
81-0708-01	10-0708-07	2500	1 1/4-16 UN	0.85	0.84	0.44	1.38
	10-0708-17	3000
	10-0808-07	2500
	10-0808-17	3000
81-0715-01	10-0715-06	4000	2 1/4-16 UN	0.92	1.00	0.58	2.36
81-0715-01	10-0815-06	4000	2 1/4-16 UN	0.92	1.00	0.58	2.36
81-0709-01	10-0710-10	8000	1 3/4-16 UN	1.06	0.87	0.36	1.86
81-0709-01	10-0810-20	8000	1 3/4-16 UN	1.06	0.87	0.36	1.86

Work Support Capacity (lb)	B	C	Lock Nut
Machining Specifications
Use with Work Supports Mounted with a Feeder Cap or Lock Nut
1,000	1 - 16	1.44	N/A
2,500	1 1/4 - 16	1.73	64-0012-00
4,000	2 1/4 - 16	2.89	64-0022-00

Self-produced Contact Bolt

Model No.	Capacity (lb)	O-Ring Part No.	A	B	C	D	E
Self-Produced Contact Bolt
Fluid Advance Supports, hydraulic pressure lifts spring which lifts plunger, hydraulic pressure locks.
10-0706-04 10-0806-05	1,000 Std. Stroke	39-0510-59 (0.236 x 0.059)	0.384	0.1.97	0.238	0.047	5/16 - 18 UNC - 2A
10-0706-14 10-0806-15	1,400 Long Stroke	39-0000-69 (0.301 x 0.064)	0.450	0.1.97	0.302	0.047	3/8 - 24 UNF - 2A
10-0708-07 10-0808-07	2,500 Std. Stroke	55-2500-05 (0.301 x 0.070)	0.493	0.250	0.328	0.070	7/16 - 14 UNC - 2A
10-0708-17 10-0808-17	3,000 Long Stroke	55-2500-05 (0.301 x 0.070)	0.493	0.250	0.328	0.070	7/16 - 14 UNC - 2A
10-0715-06 10-0815-06	4,000	39-0020-09 (0.364 x 0.070)	0.555	0.250	0.390	0.070	1/2 - 13 UNC - 2A

Call Us:	800-992-0236	Home \| About Us \| Products \| Catalogs \| CAD Library \| Resources \| FAQ/Help \| Careers \| Events \| Contact Us \| Members
+1-	913-365-1045	PO Terms & Conditions © Copyright 1996 - 2024 Vektek LLC

Fluid Advance

Fluid Advance Work Supports

Fluid Advance Work Supports

Fluid Advance Work Supports

For proper sealing, mating surface must be flat within 0.003 with a maximum 63 µin Ra surface finish.

Fluid Advance Work Supports

Fluid Advance Work Supports

Self-produced Contact Bolt

For proper sealing, mating surface
must be flat within 0.003 with a
maximum 63 µin R_a surface finish.