Bottom Flange/Manifold Mount VersaCam™ Swing Clamp Specifications

WARNING! Never allow swing arm to contact workpiece or fixture during arm rotation.

** Cylinder capacities are listed at 5,000 psi maximum operating pressure, with a standard length VektorFlo^® arm installed. Minimum operating pressure is 750 psi for single acting, 500 psi for double acting. The clamping force is adjustable by varying the hydraulic system pressure. To determine the approximate output force for your application, divide the cylinder capacity shown above by 5,000, and multiply the Resultant Number X Your System Operating Pressure to obtain the approximate clamping force for your application. (Actual force will vary slightly due to internal cantilever loading, frictional loss, and/or return springs.) 

*** To allow for work piece height variation, we recommend the arm contact point be set to approximate the midpoint of the clamping stroke.

**** To insure maximum service life and trouble-free operation, restrict fluid flow to the level indicated in the Clamp Time and Fluid Flow Rate Chart.

***** In-Port Valves require the use of manifold mount ports.

All dimensions are in inches.

Bottom Flange/Manifold Mount VersaCam™ Swing Clamp

Simply the easiest to use manifold mount design on the market today. No precision installation holes, no precisely located ports, no special mounting hardware, only our special patented design gives you all of that. Available in three sizes, 450, 1100 ando 2600 lb. capacity at 5,000 psi Unique, bolt up, bolt down or standard ported "foot" design allows you the maximum flexibility in fixture design Can be manifold face sealed or fittings may be used in the top and bottom ports (SAE 2) Standard Arm Clocking feature uses standard Vektek Arms Arms sold separately Standard models swing 90 , swing angles of less than 90 readily available using restrictors. Swings of more than 90° are special order products. Easily installed using standard capscrews. The large base and one piece mounting give this clamp excellent rigidity. Optional In-Port Flow Control is a meter-in device with reverse free flow check valve. Optional In-Port Sequence valve is a sequencing device with reverse free flow check valve.

Bottom Flange/Manifold Mount VersaCam™ Swing Clamp Dimensions

	For proper sealing, mating surface must be flat  within 0.003 in. with a maximum 63 µin Ra surface finish.
Dimensions Model No. Capacity A B C D E F G H J K L Single Acting (S/A) Cylinders, Actuated Hydraulically 1 Direction, Spring Returned 15-2105-03-L 15-2105-03-R 15-2105-03-S 450 1.05 4.32 4.06 2.80 2.99 1.00 0.66 0.438 1/4 - 28 x .375 0.22 0.38 15-2109-04-L 15-2109-04-R 15-2109-04-S 1100 1.49 5.70 5.33 3.65 3.83 1.25 0.63 0.625 3/8 - 24 x .625 0.28 0.56 15-2113-04-L 15-2113-04-R 15-2113-04-S 2600 1.79 7.35 6.83 4.43 4.67 1.25 0.63 0.875 1/2 - 20 x .750 0.34 0.75 Double Acting (D/A) Cylinders, Actuated Hydraulically Both Directions 15-2205-03-L 15-2205-03-R 15-2205-03-S 450 1.05 4.32 4.06 2.80 2.99 1.00 0.66 0.438 1/4 - 28 x .375 0.22 0.38 15-2209-04-L 15-2209-04-R 15-2209-04-S 1100 1.49 5.70 5.33 3.65 3.83 1.25 0.63 0.625 3/8 - 24 x .625 0.28 0.56 15-2213-04-L 15-2213-04-R 15-2213-04-S 2600 1.79 7.35 6.83 4.43 4.67 1.25 0.63 0.875 1/2 - 20 x .750 0.34 0.75 Model No. Capacity M N P Q R T V X Y AC AD Single Acting (S/A) Cylinders, Actuated Hydraulically 1 Direction, Spring Returned 15-2105-03-L 15-2105-03-R 15-2105-03-S 450 0.22 0.57 1.50 1.06 0.38 1.73 0.53 0.59 0.81 SAE 4 0.13 15-2109-04-L 15-2109-04-R 15-2109-04-S 1100 0.31 0.79 2.00 0.99 0.56 2.41 0.75 0.81 1.13 SAE 4 0.19 15-2113-04-L 15-2113-04-R 15-2113-04-S 2600 0.50 1.16 2.50 1.21 0.69 2.72 0.94 1.00 1.25 SAE 4 0.19 Double Acting (D/A) Cylinders, Actuated Hydraulically Both Directions 15-2205-03-L 15-2205-03-R 15-2205-03-S 450 0.22 0.57 1.50 1.06 0.38 1.73 0.53 0.59 0.81 SAE 4 0.13 15-2209-04-L 15-2209-04-R 15-2209-04-S 1100 0.31 0.79 2.00 0.99 0.56 2.41 0.75 0.81 1.13 SAE 4 0.19 15-2213-04-L 15-2213-04-R 15-2213-04-S 2600 0.50 1.16 2.50 1.21 0.69 2.72 0.94 1.00 1.25 SAE 4 0.19

All dimensions are in inches.

* Models 15-2105-01 (L, R, and S) and 15-2205-01 (L, R, S) do not include the option for manifold mounting from the to of the base. All ports (except breather), are shipped with removable steel plugs installed

** All (5) mounting bolts must be usedwhen manifold mounting to assure proper o-ring faceseal.

Bottom Flange/Manifold Mount VersaCam™ Swing Clamp Mounting