TuffCam Top Flange Clevis Swing Clamps

Single and Double Acting

Use double ended Rocker Arms to apply equal force on two surfaces of different heights.
Maximum allowable arm travel for work piece height variation is ±10°.
Manifold fitting model no. 30-8711-20, adapter assembly, and plugs are included and shipped with the clamp.
Fluorocarbon wipers as standard for improved coolant compatibility.
Same mounting envelope as standard Vektek swing clamps.
Optional in-port flow control is a meter-in device with reverse free flow check valve.
Optional in-port sequence valve is a sequencing device with reverse free flow check valve.
Pin, retaining rings, and centralizer springs included.

TuffCam Top Flange Clevis Swing Clamp Specifications

TuffCam Top Flange Clevis Swing Clamp Dimensions

WARNING! Never allow swing arm to contact workpiece or fixture during rotation.
** Cylinder capacities are listed at 5,000 psi maximum operating pressure, with a standard length Vektorflo arm installed. Minimum operating pressure is 750 psi for single acting, 500 psi for double acting. The clamping force is adjustable by varying the hydraulic system pressure. To determine the approximate output force for your application, divide the cylinder capacity shown above by 5,000, and multiply the resultant number by your system operating pressure to obtain the approximate clamping force for your application. (Actual force will vary slightly due to internal cantilever loading, friction loss and/or return springs.)
*** To allow for piece part height variations, it is recommended that the vertical travel be set at about 50% of the vertical stroke.
**** To ensure maximum service life and trouble-free operation, restrict fluid flow per table 1.
***** In-Port valves require the use of manifold mount ports.

For proper sealing, the mating surface must be flat within 0.003 with a maximum surface roughness of 63 µ in R_a.

* Right hand swing shown.
** Contact sales for other swing orientation options.

Model No.	Swing Direction	Clamp Capacity (lb.)	Vertical Clamp Stroke (in.)	Total Stroke (Swing + Vertical)	Body Dia.	Piston Area (sq. in.) Retract	Oil Capacity Extend (cu. in.)	Oil Capacity Retract (cu. in.)	Port X For Optional In-Port Valves
14-6109-20-L	Left	1,400	0.31	0.31	1.43	0.295	N/A	0.23	SAE 4 X 0.58
14-6109-20-R	Right	1,400	0.31	0.31	1.43	0.295	N/A	0.23	SAE 4 X 0.58
14-6113-20-L	Left	3,100	0.50	0.50	1.74	0.626	N/A	0.73	SAE 4 X 0.58
14-6113-20-R	Right	3,100	0.50	0.50	1.74	0.626	N/A	0.73	SAE 4 X 0.58
14-6118-20-L	Left	5,600	0.62	0.62	2.37	1.178	N/A	1.96	SAE 4 X 0.75
14-6118-20-R	Right	5,600	0.62	0.62	2.37	1.178	N/A	1.96	SAE 4 X 0.75
14-6209-20-L	Left	1,400	0.31	0.31	1.43	0.295	0.48	0.23	SAE 4 X 0.58
14-6209-20-R	Right	1,400	0.31	0.31	1.43	0.295	0.48	0.23	SAE 4 X 0.58
14-6209-21-L	Left	1,400	0.75	0.75	1.49	0.295	0.73	0.36	SAE 4 X 0.58
14-6209-21-R	Right	1,400	0.75	0.75	1.49	0.295	0.73	0.36	SAE 4 X 0.58
14-6213-20-L	Left	3,100	0.50	0.50	1.74	0.626	1.42	0.73	SAE 4 X 0.58
14-6213-20-R	Right	3,100	0.50	0.50	1.74	0.626	1.42	0.73	SAE 4 X 0.58
14-6213-21-L	Left	3,100	1.34	1.34	1.865	0.626	2.45	1.25	SAE 4 X 0.58
14-6213-21-R	Right	3,100	1.34	1.34	1.865	0.626	2.45	1.25	SAE 4 X 0.58
14-6218-20-L	Left	5,600	0.62	0.62	2.37	1.178	3.992	1.955	SAE 4 X 0.75
14-6218-20-R	Right	5,600	0.62	0.62	2.37	1.178	3.992	1.955	SAE 4 X 0.75

Model No.	Clamp Capacity (lb.)	A	B	C	D	E	F	G	H	J	K	L	M	N	P	Q	R	S	T	U	V	X	Y	Z
14-6109-20-L	1,400	1.43	5.26	4.91	2.56	1.21	1.03	0.38	0.625	0.2362	0.28	0.84	0.31	0.79	2.31	1.03	0.34	1.24	2.08	0.50	0.76	0.88	0.56	28
14-6109-20-R	1,400	1.43	5.26	4.91	2.56	1.21	1.03	0.38	0.625	0.2362	0.28	0.84	0.31	0.79	2.31	1.03	0.34	1.24	2.08	0.50	0.76	0.88	0.56	28
14-6113-20-L	3,100	1.74	6.96	6.37	3.35	1.30	1.06	0.41	0.875	0.3937	0.34	1.05	0.50	1.16	2.69	1.25	0.44	1.53	2.53	0.41	0.90	1.00	0.53	28
14-6113-20-R	3,100	1.71	6.96	6.37	3.35	1.30	1.06	0.41	0.875	0.3937	0.34	1.05	0.50	1.16	2.69	1.25	0.44	1.53	2.53	0.41	0.90	1.00	0.53	28
14-6118-20-L	5,600	2.37	9.29	8.58	4.41	1.80	1.47	0.54	1.250	0.4724	0.41	1.41	0.62	1.65	3.61	1.72	0.60	2.05	3.34	0.75	1.21	1.37	0.75	28
14-6118-20-R	5,600	2.37	9.29	8.58	4.41	1.80	1.47	0.54	1.250	0.4724	0.41	1.41	0.62	1.65	3.61	1.72	0.60	2.05	3.34	0.75	1.21	1.37	0.75	28
14-6209-20-L	1,400	1.43	1.43	4.91	2.56	1.21	1.03	0.38	0.625	0.2362	0.28	0.84	0.31	0.79	2.31	0.34	0.34	1.24	2.08	0.50	0.76	0.88	0.56	28
14-6209-20-R	1,400	1.43	1.43	4.91	2.56	1.21	1.03	0.38	0.625	0.2362	0.28	0.84	0.31	0.79	2.31	0.34	0.34	1.24	2.08	0.50	0.76	0.88	0.56	28
14-6209-21-L	1,400	1.43	1.43	6.20	3.44	1.21	1.03	0.38	0.625	0.2362	0.28	0.84	0.75	1.21	2.31	0.34	0.34	1.24	2.08	0.50	0.76	0.88	0.56	28
14-6209-21-R	1,400	1.43	1.43	6.20	3.44	1.21	1.03	0.38	0.625	0.2362	0.28	0.84	0.75	1.21	2.31	0.34	0.34	1.24	2.08	0.50	0.76	0.88	0.56	28
14-6213-20-L	3,100	1.74	1.74	6.37	3.35	1.30	1.06	0.41	0.875	0.3937	0.34	1.05	0.50	1.16	2.69	0.44	0.44	1.53	2.53	0.41	0.90	1.00	0.53	28
14-6213-20-R	3,100	1.74	1.74	6.37	3.35	1.30	1.06	0.41	0.875	0.3937	0.34	1.05	0.50	1.16	2.69	0.44	0.44	1.53	2.53	0.41	0.90	1.00	0.53	28
14-6213-21-L	3,100	1.87	1.87	8.04	4.98	1.30	1.06	0.41	0.875	0.3937	0.34	1.05	1.21	2.00	2.71	0.47	0.47	1.53	2.58	0.41	0.95	1.05	0.75	28
14-6213-21-R	3,100	1.87	1.87	8.04	4.98	1.30	1.06	0.41	0.875	0.3937	0.34	1.05	1.21	2.00	2.71	0.47	0.47	1.53	2.58	0.41	0.95	1.05	0.75	28
14-6218-20-L	5,600	2.37	2.37	8.58	4.41	1.80	1.47	0.54	1.250	0.4724	0.41	1.41	0.62	1.65	3.61	0.60	0.60	2.05	3.34	0.75	1.21	1.37	0.75	28
14-6218-20-R	5,600	2.37	2.37	8.58	4.41	1.80	1.47	0.54	1.250	0.4724	0.41	1.41	0.62	1.65	3.61	0.60	0.60	2.05	3.34	0.75	1.21	1.37	0.75	28

You have questions? WE HAVE ANSWERS!

Use the contact button below to be connected with one of our team of experts.

CONTACT US